View Full Version : My Feinstein Build ****UPDATED****
loaded6shooter
03-22-13, 16:23
As luck would have, I had planned to use a chunk this tax return to buy my first rifle, long before Newtown. With that said, I managed to piece this rifle together with exactly what I wanted, without paying gouged prices for anything thanks to the "Where to get it thread" here and being on a billion email lists. I'm in the Coast Guard and I'm waiting to go to Gunners Mate school, so building this rifle was a good learning experience for me. Couldn't be happier with the finished product, quality of the parts, and the perfect balance.
Parts list:
Seekins Precision SP15 Forged Lower
Seekins Precision Trigger Guard
Magpul MIAD Grip
Palmetto State Armory LPK w/o fire control group
<3 <3 Geissele Super Dynamic Combat Trigger <3 <3
Magpul UBR stock
VLTOR Carbine Spring
Spikes Tactical ST-T2 Buffer
BCM BFH 16in Mid-length Upper
BCM Low-Profile Gas Black
BCM F/A Bolt Carrier Group
Fortis Mfg. REV 12in Free Float Rail
Rainier Arms Raptor Ambi Charging Handle
Magpul MBUS2 Front & Rear
Noveske K9 Barricade Support
Magpul BAD Lever
Magpul AFG2
Seekins Precision Magazine Release
I have a BAD-ASS selector switch on its way and I still need to buy the Magpul UBR Aluminum Strike Plate, Magpul MS4 Sling,and a shit-ton of ammo....I'll eventually get a decent optic but not until i get the back ups dead nuts dialed in. Let me know what you guys think! :dirol:
PICS!
http://i124.photobucket.com/albums/p2/snwbordnfool33/3168bdfe-1a50-4df8-807f-4d8ac6de721f_zps917b17a1.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/332DFDCF-36BD-4FF0-8465-363A26522103-1236-00000056ACFE621E_zpsb4541b83.jpg (http://s124.photobucket.com/user/snwbordnfool33/media/332DFDCF-36BD-4FF0-8465-363A26522103-1236-00000056ACFE621E_zpsb4541b83.jpg.html)
http://i124.photobucket.com/albums/p2/snwbordnfool33/6B53BAFF-FF03-4542-95BA-7E8F23302A20-6528-0000023CB460354E_zps301d4564.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/6FFC81CE-7324-4059-B510-45F4216C592C-1236-00000056B15A05ED_zps10fcef65.jpg (http://s124.photobucket.com/user/snwbordnfool33/media/6FFC81CE-7324-4059-B510-45F4216C592C-1236-00000056B15A05ED_zps10fcef65.jpg.html)
http://i124.photobucket.com/albums/p2/snwbordnfool33/9DD9A617-A20A-4A8B-8060-113C4A96DC6E-6528-0000023CCD747B78_zps399300ae.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/276AA6A3-AA76-46C3-9C9B-F6AA45A0793E-6528-0000023CEAC27FA9_zps0d1db1a1.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/a78c3808-cb53-424f-a16a-4254465c7b1c_zpsf721e4c2.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/80ea183b-983f-43df-b2c0-5da80ecbc021_zpsc26c0ae0.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/41368CB5-F97A-4066-9841-11497744B8D1-1236-00000056AF15A292_zps01a6927e.jpg (http://s124.photobucket.com/user/snwbordnfool33/media/41368CB5-F97A-4066-9841-11497744B8D1-1236-00000056AF15A292_zps01a6927e.jpg.html)
Awesome. Needs a Feinstein logo or something to top it off.
http://www.barenakedislam.com/wp-content/uploads/2013/01/diannefeinsteintyrant.jpg
gunrunner505
03-22-13, 16:58
Absolutely need to laser etch Feinsteins mug shot into the right side of the mag well. That would be classic.
Sent from my SCH-I510 using Tapatalk 2
loaded6shooter
03-22-13, 17:00
Absolutely need to laser etch Feinsteins mug shot into the right side of the mag well. That would be classic.
Sent from my SCH-I510 using Tapatalk 2
Haha that would be perfect.
Excellent job! I really like that rail! I might sell my Troy rail and get it.
loaded6shooter
03-22-13, 18:58
Excellent job! I really like that rail! I might sell my Troy rail and get it.
I love it. I was shocked at how light it is. 9 something ounces. A lot of people were worried about the side slots being too big and burning your thumb but its def not an issue.
"Feinstein is so ugly, she looks like a fat person knee cap!" - Michael Berry
Nice build!
nice build, looks really pricey for my cheap college student ass.
loaded6shooter
03-23-13, 18:42
nice build, looks really pricey for my cheap college student ass.
Thanks man. But yeh I did go a bit overboard lol. I think I'm at about 1800, need to add it all up.
Thanks man. But yeh I did go a bit overboard lol. I think I'm at about 1800, need to add it all up.
ya people probably scuffed at my delton build thread i started. but i have had one that has lasted me for a while and goes bang every time, i checked the website and the BCG are HP/MPI tested so that a plus. i got a multi lower im going to do a wilson 300whisper and a wilson 458 socom on the switch. all match grade barrels. The whisper is also going to be SBR and Suppressed, so thats 400 in taxs alone plus i was looking at the wilson suppressor and that thing cost 1200! whew it gets expensive fast..
Retiredbroke
03-23-13, 19:00
Nice job, thinking of trying a Seekins lower myself.
BrigandTwoFour
03-24-13, 11:38
That REV rail definitely has my attention, and I've been thinking about using it on a 18" or 20" barrel precision build I've got in mind to counter the weight of the barrel.
Of course, the new smooth-sided Centurion rail is high on my list as well.
Looks good!
Very nice rifle!
Ya didn't tell us why you picked the parts ya picked and didn't tell us what you expect the rifle to do. This ain't facebook ya know!
You guys should be be more careful- dropping the F-Bomb and posting those eye-searingly ugly pictures in the same thread is a whole new level of offensive material- shock and gaah!
Now pass me the eyebleach
lol. Here, this should balance the thread again....
http://www.glamour.com/images/inspired/2013/01/gayle-trotter-testimony-w724.jpg
I like those seekins lowers. I have one, and two more from DSG on the way.
loaded6shooter
03-26-13, 08:32
I like those seekins lowers. I have one, and two more from DSG on the way.
I'm impressed with it, fit and finish is perfect. Really like the magwell too
loaded6shooter
03-26-13, 08:33
That REV rail definitely has my attention, and I've been thinking about using it on a 18" or 20" barrel precision build I've got in mind to counter the weight of the barrel.
Of course, the new smooth-sided Centurion rail is high on my list as well.
Looks good!
I'd wait until they come out with the 15 in rail. Shouldn't be too much longer.
Beautiful build, man! Congrats!
loaded6shooter
03-27-13, 16:20
Noveske K9 barricade support came in today. Thing is f***in MEAN, its taking everything i have not to walk around the house jabbing it into all my wooden furniture lol.
http://i124.photobucket.com/albums/p2/snwbordnfool33/CB5CE3C2-2303-4B4F-9EEC-663202491934-3892-0000018688507F14_zpsfe0f3879.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/7832B680-FB41-4B7F-B5BB-33392226E3F0-3892-0000018684BB2283_zps73c0ecae.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/C22A3ABC-3BB6-43EA-AB95-7495BB007865-3892-0000018744D32FE7_zps0d96ca37.jpg
Rockyriver
03-27-13, 19:55
Heres Feinsteins own build she did. ;)
http://i901.photobucket.com/albums/ac216/Rockyriver1234/Feinstein2.jpg
Oh dear Lord! I can't believe she didn't burst into flame when she touched that evil killing machine! ;)
Heres Feinsteins own build she did. ;)
http://i901.photobucket.com/albums/ac216/Rockyriver1234/Feinstein2.jpg
1slow01Z71
03-27-13, 22:56
What exactly is the point of the barricade support? I really like the Rev rail, Ill have one when they come out with the 15" version for sure.
Oh dear Lord! I can't believe she didn't burst into flame when she touched that evil killing machine! ;)
LOL! that's funny!
loaded6shooter
03-28-13, 05:35
What exactly is the point of the barricade support? I really like the Rev rail, Ill have one when they come out with the 15" version for sure.
It was designed by/for the Noveske Shooting Team. The support makes for faster follow up shots when shooting from behind a barricade as you don't have to re adjust your grip after each shot. Plus it looks tacti-cool lol :dirol:
Nice choice on the parts. The only thing I would change is canning the ST-2 buffer and putting in a regular H2, or even better installing a complete A5 kit.
loaded6shooter
03-28-13, 09:55
Nice choice on the parts. The only thing I would change is canning the ST-2 buffer and putting in a regular H2, or even better installing a complete A5 kit.
Any particular reason? I got the st t2 because I want a soft shooting rifle, so I figured I'd give it a try.
Any particular reason? I got the st t2 because I want a soft shooting rifle, so I figured I'd give it a try.
The T2 is a solution for a non-problem... buffer weight rattle. It doesn't work as well as a real buffer with real solid tungsten weights.
Vulwarpin blog or whatever filmed high speed footage of it. It wasn't horrendous, but there's a little more bolt bounce with the T2 compared to a real buffer.
loaded6shooter
03-28-13, 10:08
The T2 is a solution for a non-problem... buffer weight rattle. It doesn't work as well as a real buffer with real solid tungsten weights.
Vulwarpin blog or whatever filmed high speed footage of it. It wasn't horrendous, but there's a little more bolt bounce with the T2 compared to a real buffer.
Gotchya. Ill have to look into it. Haven't been able to shoot it yet so we'll see ow it does. Thanks for the info!
BrigandTwoFour
03-29-13, 19:16
Gotchya. Ill have to look into it. Haven't been able to shoot it yet so we'll see ow it does. Thanks for the info!
You don't need to rush off and replace it, though.
Honestly, I would sit on it until you can afford the A5 system and then just install that whole set up. I ran the T2 for a while, and the A5 is not only just a bit softer feeling, it also is significantly smoother.
loaded6shooter
03-29-13, 19:19
You don't need to rush off and replace it, though.
Honestly, I would sit on it until you can afford the A5 system and then just install that whole set up. I ran the T2 for a while, and the A5 is not only just a bit softer feeling, it also is significantly smoother.
If you can find me a whole kit ill buy it right now lol. I've seen the springs but no buffers.
Heres Feinsteins own build she did. ;)
http://i901.photobucket.com/albums/ac216/Rockyriver1234/Feinstein2.jpg
This has had me laughing for a good five minutes. Twenty bucks says she forgot to stake the castle nut and the gas key...
Nice rifle 6shooter. I've got my own Seekins lower to start on next month.
Heres Feinsteins own build she did. ;)
http://i901.photobucket.com/albums/ac216/Rockyriver1234/Feinstein2.jpg
Ugh, I see a Colt SP1 carbine, Steyr AUG, and FNC in this photo. Three beauties that will never see the light of day again.
BrigandTwoFour
03-30-13, 10:30
If you can find me a whole kit ill buy it right now lol. I've seen the springs but no buffers.
Like I said, its no hurry.
The T2 will run just fine until an A5 becomes available. The complaints about bolt bounce and such don't matter as much at semi-auto firing schedules.
loaded6shooter
03-30-13, 10:46
Like I said, its no hurry.
The T2 will run just fine until an A5 becomes available. The complaints about bolt bounce and such don't matter as much at semi-auto firing schedules.
Yeh I'm sure it will run smooth as it sits now. With that I am more than open to try out other setups. Thinking about starting a build for my wife, but we will see how she takes to it afteri take her to the range. She was petrified of handguns before I took her to the range, now she's an every day conceal carry MILF lol.
As luck would have, I had planned to use a chunk this tax return to buy my first rifle, long before Newtown. With that said, I managed to piece this rifle together with exactly what I wanted, without paying gouged prices for anything thanks to the "Where to get it thread" here and being on a billion email lists. I'm in the Coast Guard and I'm waiting to go to Gunners Mate school, so building this rifle was a good learning experience for me. Couldn't be happier with the finished product, quality of the parts, and the perfect balance.
Parts list:
Seekins Precision SP15 Forged Lower
Seekins Precision Trigger Guard
Magpul MIAD Grip
Palmetto State Armory LPK w/o fire control group
<3 <3 Geissele Super Dynamic Combat Trigger <3 <3
Magpul UBR stock
VLTOR Carbine Spring
Spikes Tactical ST-T2 Buffer
BCM BFH 16in Mid-length Upper
BCM Low-Profile Gas Black
BCM F/A Bolt Carrier Group
Fortis Mfg. REV 12in Free Float Rail
Rainier Arms Raptor Ambi Charging Handle
Magpul MBUS2 Front & Rear
Have the Noveske K9 barrier brace coming in the mail (cuz it looks cool haha) *UPDATED - SEE POST 19*......and still need to buy the Magpul AFG2, Magpul UBR Aluminum Strike Plate, Magpul MS4 Sling,and a shit-ton of ammo....I'll eventually get a decent optic but not until i get the back ups dead nuts dialed in. Let me know what you guys think! :dirol:
PICS!
http://i124.photobucket.com/albums/p2/snwbordnfool33/3168bdfe-1a50-4df8-807f-4d8ac6de721f_zps917b17a1.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/DC11D8D2-C86F-4231-B985-FBE172C25012-6528-0000023CBB70CFC5_zpse86eaf45.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/6B53BAFF-FF03-4542-95BA-7E8F23302A20-6528-0000023CB460354E_zps301d4564.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/7e58c3be-e24b-4503-af0c-fd6dbb4c2f6e_zpsd399b502.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/9DD9A617-A20A-4A8B-8060-113C4A96DC6E-6528-0000023CCD747B78_zps399300ae.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/276AA6A3-AA76-46C3-9C9B-F6AA45A0793E-6528-0000023CEAC27FA9_zps0d1db1a1.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/a78c3808-cb53-424f-a16a-4254465c7b1c_zpsf721e4c2.jpg
http://i124.photobucket.com/albums/p2/snwbordnfool33/80ea183b-983f-43df-b2c0-5da80ecbc021_zpsc26c0ae0.jpg
GREAT looking piece, well done. For Gods' sake don't even think about putting that womans face on or anywhere near that rifle, I'm sure the gun would puke!:nono:
loaded6shooter
03-30-13, 19:20
GREAT looking piece, well done. For Gods' sake don't even think about putting that womans face on or anywhere near that rifle, I'm sure the gun would puke!:nono:
I would puke every time I take it out of the case just seeing her face. Thanks for the kind words.
loaded6shooter
04-18-13, 12:11
***********UPDATE*********
Sinve the original post I've added the Noveske K9 Barricade Support (cuz it looks cool), Magpul AFG2 (first time using one and im in love with the angle, feels much more natural), Magpul BAD lever (love it! allows lightning fast operation of the bolt catch/release), and a seekins precision billet mag release (just looks much cleaner than the standard mag release)
http://i124.photobucket.com/albums/p2/snwbordnfool33/6FFC81CE-7324-4059-B510-45F4216C592C-1236-00000056B15A05ED_zps10fcef65.jpg (http://s124.photobucket.com/user/snwbordnfool33/media/6FFC81CE-7324-4059-B510-45F4216C592C-1236-00000056B15A05ED_zps10fcef65.jpg.html)
http://i124.photobucket.com/albums/p2/snwbordnfool33/41368CB5-F97A-4066-9841-11497744B8D1-1236-00000056AF15A292_zps01a6927e.jpg (http://s124.photobucket.com/user/snwbordnfool33/media/41368CB5-F97A-4066-9841-11497744B8D1-1236-00000056AF15A292_zps01a6927e.jpg.html)
http://i124.photobucket.com/albums/p2/snwbordnfool33/332DFDCF-36BD-4FF0-8465-363A26522103-1236-00000056ACFE621E_zpsb4541b83.jpg (http://s124.photobucket.com/user/snwbordnfool33/media/332DFDCF-36BD-4FF0-8465-363A26522103-1236-00000056ACFE621E_zpsb4541b83.jpg.html)
Oh dear Lord! I can't believe she didn't burst into flame when she touched that evil killing machine! ;)
It's not evil if it's hers, it's only evil if it's ours. There are two distinct sets of rules and none of them apply to the ruling class.
Red falcon
04-20-13, 10:45
Sweet looking build op! That baricade support looks freaking mean x)
***********UPDATE*********
Sinve the original post I've added the Noveske K9 Barricade Support (cuz it looks cool), Magpul AFG2 (first time using one and im in love with the angle, feels much more natural), Magpul BAD lever (love it! allows lightning fast operation of the bolt catch/release), and a seekins precision billet mag release (just looks much cleaner than the standard mag release)
http://i124.photobucket.com/albums/p2/snwbordnfool33/6FFC81CE-7324-4059-B510-45F4216C592C-1236-00000056B15A05ED_zps10fcef65.jpg (http://s124.photobucket.com/user/snwbordnfool33/media/6FFC81CE-7324-4059-B510-45F4216C592C-1236-00000056B15A05ED_zps10fcef65.jpg.html)
http://i124.photobucket.com/albums/p2/snwbordnfool33/41368CB5-F97A-4066-9841-11497744B8D1-1236-00000056AF15A292_zps01a6927e.jpg (http://s124.photobucket.com/user/snwbordnfool33/media/41368CB5-F97A-4066-9841-11497744B8D1-1236-00000056AF15A292_zps01a6927e.jpg.html)
http://i124.photobucket.com/albums/p2/snwbordnfool33/332DFDCF-36BD-4FF0-8465-363A26522103-1236-00000056ACFE621E_zpsb4541b83.jpg (http://s124.photobucket.com/user/snwbordnfool33/media/332DFDCF-36BD-4FF0-8465-363A26522103-1236-00000056ACFE621E_zpsb4541b83.jpg.html)
If you havent named this mutt..can I suggest Hell Hound?
For Finklestein...that would also work...:D
Your hand stop has a hand stop.
loaded6shooter
04-24-13, 13:05
Your hand stop has a hand stop.
I'm thinking about cutting off the front of the AFG and butting it up against the barricade support.....don't know if I want it that far forward or not though.
Crazy Chuckster
04-25-13, 08:40
Your hand stop has a hand stop.
LOL
I think it looks bad ass. I used to have my AFG that far forward on my AR22 but I have since moved it closer to the magwell.
ya people probably scuffed at my delton build thread i started. but i have had one that has lasted me for a while and goes bang every time, i checked the website and the BCG are HP/MPI tested so that a plus. i got a multi lower im going to do a wilson 300whisper and a wilson 458 socom on the switch. all match grade barrels. The whisper is also going to be SBR and Suppressed, so thats 400 in taxs alone plus i was looking at the wilson suppressor and that thing cost 1200! whew it gets expensive fast..
Dont know whats worse, having a delton, or wasting money on wilson products. Eek.
Also just because a bcg is hp/mpi tested it doesnt automatically make it good. IMO that is just a bare minimum requirement.
I'm thinking about cutting off the front of the AFG and butting it up against the barricade support.....don't know if I want it that far forward or not though.
FYI The front "stop" on an afg houses the front nut and bolt for holding the thing together. Cut it off and the thing will eventually start to bow open at the seam, regardless of the main bolt which clamps things together in the middle being there to hold it tight.
it looks bad ass.
Gotta ask... How does it shoot? ;)
loaded6shooter
04-27-13, 07:32
Gotta ask... How does it shoot? ;)
Was just able to get a decent amount of ammo yesterday, so hopefully soon I will have an answer for you lol. Its killing me not to shoot it.
Shoulderthinggoesup
04-27-13, 17:03
Love the seekins rollmark. Nice stick.
loaded6shooter
04-28-13, 15:42
Love the seekins rollmark. Nice stick.
Thanks man! Would love to get my hands on one of their billet SP223 lowers but this came available first
a true feinstein build would have the detachable dildo on the end. :sarcastic:
a true feinstein build would have the detachable dildo on the end. :sarcastic:
Dont forget the picture of americas #1 gun sales man on the stock!
Prisonmike
05-13-13, 15:22
Nice build.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.