View Full Version : Magpul Gen3 40rd Pmags...
http://store.magpul.com/product/MAG233
Magpul FB page says they're shipping now...
I just saw that, and I can't wait to pick up a few.
Can't wait to get ahold of these.
The only problem might be finding enough ammo at Wally World to load a couple of these clips.
We kept this close hold until late last week. They are on their way to the usual suspects, however. Should see them as available very quickly, at least until the first deliveries sell out.
MSRP $19.95
We kept this close hold until late last week. They are on their way to the usual suspects, however. Should see them as available very quickly, at least until the first deliveries sell out.
MSRP $19.95
Awesome. I appreciate how Magpul waits to release until they have sufficient quantity available.
PatrioticDisorder
06-17-13, 15:08
I think I'd prefer the 20 & 30 round mags for weight, but I'd take a few of these to piss the wacktards off, much rather have a 40 round pmag than a 60 round Surefire, hands down.
We kept this close hold until late last week.
hat's off for that... especially with all the bozos on FB accusing you guys of 'folding to pressure' etc when you released the 10 rounders. =]
Berserkr556
06-17-13, 15:14
Awesome ! Now only if we could get OHIO to change their stupid magazine law.
http://www.youtube.com/watch?v=H72VApNXjHw
I've updated my email notifications!
armed_zebra
06-17-13, 15:52
Any chance these have been tested with 300 BLK? I'm curious if the spring would be strong enough for 40 rounds of 220gr subs. My 30 rounders work fine but the mag is a bit heavy when fully loaded (although that has nothing to do with brand of magazine).
Awesome job Magpul!
Thanks for getting these out prior to the mag-cap-limit BS in CO- it is much appreciated for those of us who will be behind enemy lines soon.
Just placed my order...
BoringGuy45
06-17-13, 16:29
Oh crap...Another thing I have to buy! :D
I thought they were working on a quad stack magazine. I have no interest in a 40 rounder 30% longer than a 30. If Surefire would make a 40 round magazine just a little longer than a double stack 20 I would be all over it. GH
Doc. Holiday
06-17-13, 17:11
Ha, new laws suggest to limit rifle mags to only 10 rounds and what does Mapul do? Add another 10 rounds to their standard mags haha FU Obama!
Littlelebowski
06-17-13, 17:38
Can't wait to see what's stamped on these guys.
Awesome ! Now only if we could get OHIO to change their stupid magazine law.
This.:(
From Facebook: "With the same compatibility as the 30-round GEN M3, the PMAG 40 provides 10 more rounds of capacity before requiring a reload—which could be a lifesaving difference. This new "safe capacity" offering is ideally suited for those who may need to respond to multiple threats without extra rifle magazines carried on their person, or for military members looking for an extra margin of safety in high-tempo operations".
I love their marketing and messaging! Brilliant!
From Facebook: "With the same compatibility as the 30-round GEN M3, the PMAG 40 provides 10 more rounds of capacity before requiring a reload—which could be a lifesaving difference. This new "safe capacity" offering is ideally suited for those who may need to respond to multiple threats without extra rifle magazines carried on their person, or for military members looking for an extra margin of safety in high-tempo operations".
I love their marketing and messaging! Brilliant!
That's how you cause a journalist looking for an excerpt to take out of context to lose their freakin' mind. :haha:
theblackknight
06-17-13, 18:02
load a couple of these clips.
WUT
sent from mah gun,using my sights
Can't wait to get ahold of these.
The only problem might be finding enough ammo at Wally World to load a couple of these Magazines.
Fixed it for ya. ;)
Just a bit off topic here. Duane, Any timeline on when the PMag Ranger Plates for the Gen M3 Pmags will be hitting the shelves?
Just a bit off topic here. Duane, Any timeline on when the PMag Ranger Plates for the Gen M3 Pmags will be hitting the shelves?
Released today with the 40's in the same newsletter. Now shipping.
Released today with the 40's in the same newsletter. Now shipping.
That's great news for sure. There's been a whole lot of Gen M3 Pmags gobbled up by the masses recently. I'm sure they/we/me will be sucking up these Ranger plates as well. Thanks for the info and continued success of Magpul products.
Duane-
Another slightly off-topic question...any word on availability of Gen3 7.62 mags, especially the 25-round version?
Thanks in advance for your reply.
-Rainman
SeriousStudent
06-17-13, 19:38
That's how you cause a journalist looking for an excerpt to take out of context to lose their freakin' mind. :haha:
Well played, sir, well played.
I thought I was done accumulating mags as we slip into the dark ages here in Colorado, but I couldn't resist and grabbed a pair of the 40-rounders via the Airlift program.
Bang bang, now she go bang forty times now :haha:
Cutting it close with the CO mag ban hitting . . . hopefully I can snag a couple when they come out just as one more eff you to Hickenloser and the other progressive azzhats out here. If not, I did manage to pick up a 5 pack of the "Free Colorado" mags when they were announced--so it was great to at least get a hold of those to aid the cause.
Duane-
Another slightly off-topic question...any word on availability of Gen3 7.62 mags, especially the 25-round version?
Thanks in advance for your reply.
-Rainman
Also curious...
Would love to see the looks on people's faces with a PMAG 10/40 kit here in CA =P.
Gen M3 in 7.62 are very very close. We just couldn't make the July 1 timeline with those, but we won't miss it by much. This is going to be a busy couple months.
Gen M3 in 7.62 are very very close. We just couldn't make the July 1 timeline with those, but we won't miss it by much. This is going to be a busy couple months.
Thanks Duane.
Offhand, I'd say it's already been a busy year!
-Rainman
Cool. Am eager to pick a few up to play with. Always liked having a couple 40rders around just in case. Price point is awesome as well, though I imagine locally I'll see them running for the MSRP of a Surefire 60rder. But if I can find them for actual MSRP then I will surely grab a few to play with.
Awesome ! Now only if we could get OHIO to change their stupid magazine law.
It's in the works, call your Ohio reps let them know to support HB191!
http://www.buckeyefirearms.org/node/8965
From Facebook: "With the same compatibility as the 30-round GEN M3, the PMAG 40 provides 10 more rounds of capacity before requiring a reload—which could be a lifesaving difference. This new "safe capacity" offering is ideally suited for those who may need to respond to multiple threats without extra rifle magazines carried on their person, or for military members looking for an extra margin of safety in high-tempo operations".
I love their marketing and messaging! Brilliant!
Agree.
the msrp on happiness is lower than i thought:D
theblackknight
06-17-13, 21:50
How about in FDE ?
Walmart sells spray paint.
Thought I was done buying mags also, looks like these PMAG 40s will have to be put through the paces..
LowSpeed_HighDrag
06-17-13, 22:21
Bought two. One for each of my middle fingers that I stick up for my governor here in CO.
EricTheRed
06-17-13, 22:50
^^^^ Right there with ya.
What's the weight on a loaded 40 round mag?
ColtM4Carbine
06-17-13, 22:59
Can't wait until I can try these out!
Walmart sells spray paint.
Wow, I'm surprised Magpul doesn't just sell small cans of spray paint instead of maintaining four+ SKU's for each mag model.
skyboss_4evr
06-18-13, 00:32
That's how you cause a journalist looking for an excerpt to take out of context to lose their freakin' mind. :haha:
I love it!!
Well I'm sold. I'm buying a slide fire for my DPMS.
Well played, Magpul. Well played.....
SilverBullet432
06-18-13, 02:43
very nice! very nice!! now if i could find at least one for the msrp, i would be a happy camper!! nice way to "stick it to the man" Magpul!!
Bought two. One for each of my middle fingers that I stick up for my governor here in CO.
From where? I checked out the links on the dealer page, no dice.
From where? I checked out the links on the dealer page, no dice.
It's available to CO residents online through the Airlift project.
How about some 15 rounders for the poor SOBs like me trapped in commie states like NJ. Pretty please with sugar on top :D
ChefDementia
06-18-13, 07:26
hmmm one last purchase of PMAGs before Colorado goes on lock down? I think so.
It's available to CO residents online through the Airlift project.
Well that doesn't help the rest of us!
OK, I'll keep checking the usual sites. Good luck, CO folks!!
The rest of us don't need help as we will soon be swimming in P40's...:p
Well that doesn't help the rest of us!
OK, I'll keep checking the usual sites. Good luck, CO folks!!
If I had known that these were actually finally coming out I wouldn't have blown my load on a bunch of those Bulgarian or whatever they are polymer 40s that were circulating awhile back. They work great, but I trust the Magpul name more. I'm officially cut off for another four months anyway so I'll just have to sit back and drool over pics and reviews.
I just figgured out, it takes $20 to buy the mag, and $26 to fill it.
Looking forward to ammo prices going down again.
I just figgured out, it takes $20 to buy the mag, and $26 to fill it.
Ha ha! :p
Anyone have any pics of these Clips yet, yo?
Jake.g.dpms
06-18-13, 08:59
Awesome ! Now only if we could get OHIO to change their stupid magazine law.
I was thinking the same, but I see sure fire 60s at my lgs all the time...
whiterabbit05
06-18-13, 09:20
Brownells now taking pre-orders.
ColtM4Carbine
06-18-13, 09:44
Brownells now taking pre-orders.
Will these sell out before they get them in stock?
Will these sell out before they get them in stock?
Yes....
whiterabbit05
06-18-13, 09:48
My order just got updated to "In Stock".
Hmmmmmm!
My order just got updated to "In Stock".
Hmmmmmm!
SWEET! :)
44clip still hasn't updated. Are they on the recipient list?
yeah Brownells is now back to the 'alert me when available' button.... =\
44clip still hasn't updated. Are they on the recipient list?
I would start with the vendors listed on Magpul's website. Didnt see "44clip" on there.
Placed an order for 2 from Brownells about 30 minutes ago and it was just updated to "in stock."
Damn. Too late with brownells
I would start with the vendors listed on Magpul's website. Didnt see "44clip" on there.
Placed an order for 2 from Brownells about 30 minutes ago and it was just updated to "in stock."
ok
(and you won't, just my little game of mag vs clip lol. www.44mag.com)
http://farm6.staticflickr.com/5321/9079956704_44c725e258_o.jpg
PLEASE DON'T POLLUTE THIS THREAD WITH MY ORDER IS ENROUTE OR I HAVE 15 IN THE MAIL. NO ONE CARES. POST A MEANINGFUL REVIEW AFTER YOU HAVE USED THEM.
They are magazines, not clips.
Can't wait to get ahold of these.
The only problem might be finding enough ammo at Wally World to load a couple of these clips.
Good to see. Hopefully those Magpul 60's are down the pipeline.
Mags do look a bit long however.
Good to see. Hopefully those Magpul 60's are down the pipeline.
Mags do look a bit long however.
If they are going with a quad stack mag I am hoping they go with something that doesn't hang any farther down then a 30rder. A 50rder maybe? If they produced something like that then I think they would blow Surefire out of the water.
fallenromeo
06-18-13, 17:02
If they are going with a quad stack mag I am hoping they go with something that doesn't hang any farther down then a 30rder. A 50rder maybe? If they produced something like that then I think they would blow Surefire out of the water.
Especially considering the price point of the 40rd mags, I can't imagine them pricing a quad stack mag anywhere near the price of the surefires. But who knows until they actually release one.
Duane - when will Magpul be relocating to Wyoming?
Duane - when will Magpul be relocating to Wyoming?
Well...we're wrapping up negotiations with a yet unnamed state for the first, most significant portion of the move right now. Sorry...can't confirm or deny any locations while we're still negotiating, just in case something doesn't work out--as soon as we say publicly, "we're going to XX!", we lose a good bit of bargaining position.
HQ and additional manufacturing relocation has been narrowed down to the last few options, and we've got a relocation consultant company working down those options with us.
We've already moved portions of production to 4 other states, including a significant segment of GEN M3 production, but the manufacturing hub will include us as well as a handful of our largest suppliers, who are moving with us. This move will have the majority of the impact on CO.
We were hoping to make some announcements around July 1, as soon as we've finished the arrangements for the first location, but it may take longer. I'm pushing for mid-month at the latest, but we'll see. Believe me...no one wants to get this show on the road more than me. It's just not a small task to make all these arrangements and do so in a fashion that the company can be healthy on the other side of the move.
Can't wait to get ahold of these.
The only problem might be finding enough ammo at Wally World to load a couple of these clips.
Clips?? Seriously?
okdonk, presuming that that hasn't been addressed (it has):
When the time comes that the staff needs your help...we'll find a way to have a hologram of some busty chick with an odd hairdo tell you "Help us, ok-donk, you're our only hope."
Until then, use the Report Post button in the upper right corner of a post to let us know about the questionable ones. That way, somebody with the ability to DO something...instead of just SAY something because it feels good... can see to it correctly.
Thanks bunches.
That goes for the rest of you, as well. Stop dicking the dog, please. It's gross.
PLEASE DON'T POLLUTE THIS THREAD WITH MY ORDER IS ENROUTE OR I HAVE 15 IN THE MAIL. NO ONE CARES. POST A MEANINGFUL REVIEW AFTER YOU HAVE USED THEM.
:lol:
Can they at LEAST post tracking numbers so we can all follow their shipment online?
We are running out of time!
PLEASE!
I wish I could have those in my state without becoming a felon :-(
We are running out of time!
PLEASE!
At least one person in this thread has indicated that they've already bought them through that program.
We are running out of time!
PLEASE!
We announced the Boulder Airlift for the 40 rounders with the product release. We sold out through that program in a matter of hours at a max of 2 per person. I doubt that we will be able to get another run in time just due to logistics, but if we can, we will open it back up.
http://farm3.staticflickr.com/2813/9082165246_ae3baa70ea_o.jpg
http://farm6.staticflickr.com/5325/9081714144_3d7d5eb362_o.jpg
Littlelebowski
06-19-13, 13:27
We announced the Boulder Airlift for the 40 rounders with the product release. We sold out through that program in a matter of hours at a max of 2 per person. I doubt that we will be able to get another run in time just due to logistics, but if we can, we will open it back up.
Personally, I'd love to see all 40 rounders go to Colorado until they cannot be bought there.
Personally, I'd love to see all 40 rounders go to Colorado until they cannot be bought there.
Wouldn't hurt my feelins'.
I think these could come in handy for shooting prone in tall grass/uneven surfaces.
What about the Cartels? Here's my P.O. number for that batch: HOLDER1 :D
Still holding out for two :)
I wonder how feasible it would be to do a 50rnd mag in the same format as a beta clip C-clip .....
StrikerFired
06-19-13, 15:31
Can't Wait!
Personally, I'd love to see all 40 rounders go to Colorado until they cannot be bought there.
Help those behind the lines and on a deadline before helping those who are in free states, I can live with that.
At least one person in this thread has indicated that they've already bought them through that program.
I was just lucky that I logged in to Magpul's site when I did and didn't hesitate to place the order. I'd take pre-COban AK PMAG's over 40rd AR PMAG's if I had a choice though.
Please X 1,000,000 make some 15 rounders for us poor bastards in the restricted states like NJ:(:(:(
Personally, I'd love to see all 40 rounders go to Colorado until they cannot be bought there.
thats how it should have been. Im dissappointed that CO residents weren't given this option.
I'm saying that and i've never even been to CO.
http://farm6.staticflickr.com/5335/9078500495_03a4936fba_o.jpg
SilverBullet432
06-19-13, 17:08
http://farm6.staticflickr.com/5335/9078500495_03a4936fba_o.jpg
awesome, just awesome! now thats a stick!! that 40 rounder looks good on there too! :)
theblackknight
06-19-13, 17:13
Personally, I'd love to see all 40 rounders go to Colorado until they cannot be bought there.
I'm all for this as well.
But when I get one, I'm gonna put a nordic 18r extension and the extended spring+ my 20r pmag spring, just because racegun. Prone? Ain't nobody got time for that.
sent from mah gun,using my sights
awesome, just awesome! now thats a stick!! that 40 rounder looks good on there too! :)
Don't encourage him. :mad: :p
Corporate guns with banana clips.
The_War_Wagon
06-19-13, 17:59
A 40 round mag that WORKS?!?! :eek:
MUST have... a few dozen, at least! :D
Especially considering the price point of the 40rd mags, I can't imagine them pricing a quad stack mag anywhere near the price of the surefires. But who knows until they actually release one.
True, must hold judgement until they are actually available. But at least Magpul is usually pretty good for making things at a damn reasonable price. Their most expensive product prior to December was what the PRS? Though around here in January and February some where marking Pmags for more. :suicide2:
http://farm6.staticflickr.com/5341/9086760761_aa8b55bc69_o.jpg
Just received my shipment confirmation from Magpul this evening... a pair of XL PMAG's are on the way.
Hopefully FedEx Ground can transport the box ~30 miles between Magpul and my location sans "delivery exception" drama for once :confused:
VVVVV
PLEASE DON'T POLLUTE THIS THREAD WITH MY ORDER IS ENROUTE OR I HAVE 15 IN THE MAIL. NO ONE CARES. POST A MEANINGFUL REVIEW AFTER YOU HAVE USED THEM.
Midway apparently has them is stock as of this morning.
One per customer.
Midway - $16.68, but $30 with shipping and fees!
Midway - $16.68, but $30 with shipping and fees!
Actually my tally was:
$18.95 + $9.53 s/h + $3.00 handling fee = $31.48
They gave me the "birthday pricing."
We announced the Boulder Airlift for the 40 rounders with the product release. We sold out through that program in a matter of hours at a max of 2 per person. I doubt that we will be able to get another run in time just due to logistics, but if we can, we will open it back up.
Not sure why ALL PMAG40 made prior to 07/01 was not dedicated to CO residents. Me and many other non-CO residents got some via Midway, while CO residents who missed the PMAG40 airlift get nothing, unless they were as quick as I was at Midway.
FWIW, I have already promised my PMAG40s to a CO resident who missed out the PMAG40 airlift. Hopefully Midway can deliver in time to make this happen.
Not sure why ALL PMAG40 made prior to 07/01 was not dedicated to CO residents. Me and many other non-CO residents got some via Midway, while CO residents who missed the PMAG40 airlift get nothing, unless they were as quick as I was at Midway.
FWIW, I have already promised my PMAG40s to a CO resident who missed out the PMAG40 airlift. Hopefully Midway can deliver in time to make this happen.
The amounts shipped to distribution were extremely small compared to what stayed in CO. Extremely.
We also have one last hurrah left in CO, where there will likely be another shot at the 40s, although it will likely be an in-person, cash and carry affair. This will be advertised on social media, radio, and newspapers, so everyone can get in on it.
The amounts shipped to distribution were extremely small compared to what stayed in CO. Extremely.
We also have one last hurrah left in CO, where there will likely be another shot at the 40s, although it will likely be an in-person, cash and carry affair. This will be advertised on social media, radio, and newspapers, so everyone can get in on it.
Good news. I think we are all saddened by the events in CO, and would like to do as much to help them before it is too late.
The amounts shipped to distribution were extremely small compared to what stayed in CO. Extremely.
We also have one last hurrah left in CO, where there will likely be another shot at the 40s, although it will likely be an in-person, cash and carry affair. This will be advertised on social media, radio, and newspapers, so everyone can get in on it.
You guys rock! Big thanks and much respect!
Us CO guys may just have to throw you all a party when we win the state back...
Thanks again for your continued effort at fighting the tyrants and sheep who are ruining this state
Little Creek
06-21-13, 08:07
Actually my tally was:
$18.95 + $9.53 s/h + $3.00 handling fee = $31.48
I added another Magpul product to my order with no change to the s/h and the $3 handling fee went away.
Meta-Prometheus
06-21-13, 14:21
Here is the guts comparison. Just got my 2x Pmag 40's yesterday.
http://i1008.photobucket.com/albums/af210/jagraf5492/073.jpg (http://s1008.photobucket.com/user/jagraf5492/media/073.jpg.html)
I'm not cool like Stickman though, no 10 round guts to show you. Sorry.
I'm not cool like Stickman though, no 10 round guts to show you. Sorry.
Forget that. He's a pacific North west Hipster.
Probably drinks Chai tea and such!
whiterabbit05
06-21-13, 14:43
Same spring length for the 30 and 20?
The amounts shipped to distribution were extremely small compared to what stayed in CO. Extremely.
We also have one last hurrah left in CO, where there will likely be another shot at the 40s, although it will likely be an in-person, cash and carry affair. This will be advertised on social media, radio, and newspapers, so everyone can get in on it.
Eagerly anticipating this. I preordered 20 on Brownells, but it's a throw of the dice whether they get them and ship them to me before the Doom comes on 1 July.
Same spring length for the 30 and 20?
Yep. The top 20 rounds have a more ideal spring pressure for feeding in the 30...so using the same spring in the 20 is win/win. Parts commonality and optimized performance.
Unfortunately, there are some who get some problems with closed bolt insertion since they're not used to having 30rd spring pressure in a smaller mag body. It's the same exact insertion force as with a 30, but some think it feels different.
ColtM4Carbine
06-21-13, 15:20
Eagerly anticipating this. I preordered 20 on Brownells, but it's a throw of the dice whether they get them and ship them to me before the Doom comes on 1 July.
Found this in the description of Gen 3 PMAGS on Brownell's website:
"First shipments of 40-round Pmags will begin shipping in early July"
I just received my pair from Magpul. I'm glad I ordered them when I did, Midway USA already cut-off their shipments to Colorado :(
originaldubu
06-21-13, 16:25
Can't wait to get ahold of these.
The only problem might be finding enough ammo at Wally World to load a couple of these clips.
Clips? I hate you so much:nono:
Found this in the description of Gen 3 PMAGS on Brownell's website:
"First shipments of 40-round Pmags will begin shipping in early July"
Dammit :suicide2:
EricTheRed
06-21-13, 16:54
Took mine to the range today. As expected, no issues. No problems loading the full 40, no problems feeding, everything went smooth. And yes, you can use it as a rest to shoot from. :D
kudos to Magpul for getting these out so fast. This CO resident appreciates it.
The ladies will definitely be chatting you up with one of these hanging out of your magwell :dance3:
MountainRaven
06-22-13, 00:10
http://farm3.staticflickr.com/2813/9082165246_ae3baa70ea_o.jpg
http://farm6.staticflickr.com/5325/9081714144_3d7d5eb362_o.jpg
That's not true. That's impossible!
When did GenM3s start working with Noveske Gen2 lowers?
EDIT: Durr. Must have been a while ago. Just tried a 30-round GenM3 in my roommate's Noveske and it works. Harumph.
That's not true. That's impossible!
When did GenM3s start working with Noveske Gen2 lowers?
EDIT: Durr. Must have been a while ago. Just tried a 30-round GenM3 in my roommate's Noveske and it works. Harumph.
Only the earlier FFLs have the problem with the M3s.
https://www.m4carbine.net/showthread.php?p=1446069#post1446069
-john
Plumber237
06-22-13, 06:20
From Facebook: "With the same compatibility as the 30-round GEN M3, the PMAG 40 provides 10 more rounds of capacity before requiring a reload—which could be a lifesaving difference. This new "safe capacity" offering is ideally suited for those who may need to respond to multiple threats without extra rifle magazines carried on their person, or for military members looking for an extra margin of safety in high-tempo operations".
I love their marketing and messaging! Brilliant!
I agree, way to use a tagline that shoves it down the capacity ban retards throats...Magpul FTW!
Gonna have to grab a few 40 rounders.
The amounts shipped to distribution were extremely small compared to what stayed in CO. Extremely.
We also have one last hurrah left in CO, where there will likely be another shot at the 40s, although it will likely be an in-person, cash and carry affair. This will be advertised on social media, radio, and newspapers, so everyone can get in on it.
http://youtu.be/hamKl-su8PE
HighDesert
06-22-13, 10:38
Found this in the description of Gen 3 PMAGS on Brownell's website:
"First shipments of 40-round Pmags will begin shipping in early July"
Midway originaly had an expected ship date of July 24 or something on the Pmag 40 product page before they started selling them magically the next day...
I would doubt Brownells ship date is longer than a week.
Yep. The top 20 rounds have a more ideal spring pressure for feeding in the 30...so using the same spring in the 20 is win/win. Parts commonality and optimized performance.
Unfortunately, there are some who get some problems with closed bolt insertion since they're not used to having 30rd spring pressure in a smaller mag body. It's the same exact insertion force as with a 30, but some think it feels different.
Very interesting I would have never had thought that. Well more reason to just buy the whole damn M3 family then. Now if you will excuse me I am going to play mix master with a couple mags and mind **** some people.
http://farm3.staticflickr.com/2890/9111530056_7f11dec87f_o.jpg
Gonna wait for the windowed versions.
snakedoctor
06-22-13, 19:16
Just as I suspected, it worked just like any other PMAG I've ever used. I can't tell much difference in the weight either. Magpul hit another Home Run! :dirol:
http://farm6.staticflickr.com/5475/9112670210_2ef3282b5a_z.jpg (http://www.flickr.com/photos/57942327@N05/9112670210/)
http://farm8.staticflickr.com/7452/9110445855_534996e9f4_z.jpg (http://www.flickr.com/photos/57942327@N05/9110445855/)
I don't really need any of these, but I sure as hell will be picking a few up. It's great of Magpul to send the first of these to the folks of CO before their new nanny state takes over.
It would be awesome for Magpul to move to UT:D
7.62WildBill
06-23-13, 12:55
Duane, are there any future plans to produce a M&P 15-22 magazine?
I know someone will give me grief for the A2 grip, but I've been all out of MOE grips for awhile. I'll swap it out when my grips arrive. :D
http://farm4.staticflickr.com/3820/9094936055_70eef59b86_o.jpg
I know someone will give me grief for the A2 grip, but I've been all out of MOE grips for awhile.
The grip is the least offensive part of the gun. :confused:
The grip is the least offensive part of the gun. :confused:
When I say grip, I was specifically talking about your golf game.
When I say grip, I was specifically talking about your golf game.
Game? More of a disaster. ;)
I like the mags, but with their exaggerated length, they look like a caricature of themselves! Like someone stuck an AK-74 mag in their AR
I like the mags, but with their exaggerated length, they look like a caricature of themselves! Like someone stuck an AK-74 mag in their AR
I agree. They're silly to me. I'll probably buy one just to have, but I'm in no hurry to go long in these things.
Sorry...can't confirm or deny any locations
Well, Magpul, when ya'll do move to South Carolina, I want to be the first to say "Welcome!" :cool:
.
ColtM4Carbine
06-25-13, 13:13
Been a week since my pre-order. Brownell's still hasn't taken money from my account. Doesn't look good for those who ordered from Colorado...
Been a week since my pre-order. Brownell's still hasn't taken money from my account. Doesn't look good for those who ordered from Colorado...
What's the law say? Don't the mags just need to be dated before a certain date?
EricTheRed
06-25-13, 13:30
No, the date thing was a poor attempt by the legislature to get Magpul to stay. They amended teh bill to allow manufacture of anything here if they stamped a date on it. Those would still only be allowed for out of state sales/ distribution though. If you are in Colorado, it is still going to be illegal after July 1 to buy, sell, or transfer, "anything over 15 rds or readily convertible to more than 15 rds". The readily convertible part is what I'm pinning my hopes on for overturning this crap. As it's written I can't buy a new Glock 19 for example and also get mags, making it a de facto gun ban. Hopefully our side has good lawyers. It's also another reason why I have no problem buying the 40's and the "Free Colorado" mags as I think proceeds from those go to the legal fight. (I may be wrong on the 40's, but good on Magpul anyway for continuing the fight)
ETA: AFAIK the ship date (if that's what you meant) must be before July 1 if you have an order, but it doesn't much matter as Cabelas, Midway, and assuming some others, have already stopped sales to CO as of 5-6 days ago.
If you are in Colorado, it is still going to be illegal after July 1 to buy, sell, or transfer, "anything over 15 rds or readily convertible to more than 15 rds".
Highly unenforceable. :rolleyes:
Is there a window'd version of said 40 round PMAG?
NO!!!! :p
I'm not saying we are or are not planning on an eventual window 40 release...but I can tell you that it's certainly not something in the "pending" category.
I'm not saying we are or are not planning on an eventual window 40 release...but I can tell you that it's certainly not something in the "pending" category.
Just don't miss the window of opportunity with this option
skijunkie55
06-25-13, 14:20
I'm not saying we are or are not planning on an eventual window 40 release...but I can tell you that it's certainly not something in the "pending" category.
cool cool :) I personally prefer the non-window pmags myself but it would be pretty neat
Just don't miss the window of opportunity with this option
Iseewhatyoudidthere...
The next person who takes a dump here is going on vacation. No warning, no excuses. This shit is getting old.
I like the mags, but with their exaggerated length, they look like a caricature of themselves! Like someone stuck an AK-74 mag in their AR
I'll pass on them. I'm good with 30rds, but I applaud the effort
Does anybody have any hard use time on these? I know magpul makes great stuff but I'd like to see that they can take a beating and still run before dumping a bunch of money into them
ColtM4Carbine
06-25-13, 21:13
Does anybody have any hard use time on these? I know magpul makes great stuff but I'd like to see that they can take a beating and still run before dumping a bunch of money into them
I know a couple guys who got there 40 rounder from Midway today. They haven't been able to test it out yet, but look for some reviews in the next few days with people starting to get there orders in.
Does anybody have any hard use time on these?
They were just released a week ago.
Sent via Tapatalk
I like the mags, but with their exaggerated length, they look like a caricature of themselves! Like someone stuck an AK-74 mag in their AR
Well at least we know these are reliable and also priced very well.
It will be a much better option compared to the 42-rd Promags or Surefire60's that I've had jamming issues with.
http://img.photobucket.com/albums/v424/eiji81/1%20AR15/DSCI0214.jpg (http://smg.photobucket.com/user/eiji81/media/1%20AR15/DSCI0214.jpg.html)
Can't wait to have these Pmag40's...
If CO chooses to ignore the law, it will die eventually. Honestly, it's unenforceable.
On subject:
Do these make prone shooting a non option?
Does anybody have any hard use time on these? I know magpul makes great stuff but I'd like to see that they can take a beating and still run before dumping a bunch of money into them
With the release so recent, no one but us had really had a chance to wring them out. I can assure you, though...although our test crew put in some long hours to fast track the testing so we could release before July 1, we didn't skip anything or shortchange it. 6,000 rounds each mag in the endurance test. Drops, crushes, hot, cold, suppressed, platform compatibility...you name it.
Can somebody post a pic of a PMAG 40 next to PMAG 30 with a ranger plate attached.
Do these make prone shooting a non option?
I wouldn't think so. You just can't get really low.
1slow01Z71
06-26-13, 08:38
Duane, are there any future plans to produce a M&P 15-22 magazine?
That would be really cool, I'm not too big of a fan of the factory mags. Ive been spoiled by pmags and ruger factory mags.
Can't talk about stuff in the pipeline. Lots of stuff on the table...all a matter of prioritizing.
7.62WildBill
06-26-13, 11:47
Can't talk about stuff in the pipeline. Lots of stuff on the table...all a matter of prioritizing.
Thanks, understood. Keep up the excellent work!
narcedglocker
06-26-13, 11:55
love these mags, if only to see LIEberal heads explode
GLOCKCRAZZ
06-27-13, 12:36
Can't wait to pick a few of these up.
Quiet Riot
06-27-13, 14:43
If you don't like Magpul mags, this won't change your mind. If you prefer 20 round mags over 30 round mags, you will not want one of these.
However, if you like PMAG 30s, then you will probably like the PMAG 40. It is exactly what you would expect from a PMAG, except that I was surprised by how I didn't notice the extra weight or length when in my rifle. Until I went prone, it felt just like I was shooting a PMAG 30.
Though I'm not dropping my 30 round mags for these, nor do I expect anyone else to, these are going to do really, really well.
http://www.youtube.com/watch?v=xWzbWadH2-g
Has Magpul done any testing with any specific m4 mag pouches? I would ASSume that any closed-top pouches for 30 rounders wouldn't work, but maybe some open-top ones would be ok?
Awesome1228
06-27-13, 17:10
love these mags, if only to see LIEberal heads explode
Man. It's this kind of rhetoric that leads to the polarized political condition we are...oh, nevermind.
Has Magpul done any testing with any specific m4 mag pouches? I would ASSume that any closed-top pouches for 30 rounders wouldn't work, but maybe some open-top ones would be ok?
They fit with most bungee top shingles, though the bungees are a little short on others. They are a little long for closed top, but you can usually get one in a closed top pouch designed for 2.
I have Tyr, Tac Tailor, HSGI Taco, and ATS pouches here beside me. The Tac Tailor and ATS could use a longer bungee. Tyr fit fine. Taco, of course is no issue.
Duane,
Does the over insertion stop on any of the M3 mags pose a problem with fit into ITW FastMags?
However, if you like PMAG 30s, then you will probably like the PMAG 40.
^ :lol: does not apply to me. I'll stick with 30rd'ers.
love these mags, if only to see LIEberal heads explode
that may have been magpuls intent. I'm sure spite played a small part in this 40rd mag being produced, but lets avoid rubbing this in the face of those who oppose
...that may have been magpuls intent. I'm sure spite played a small part in this 40rd mag being produced, but lets avoid rubbing this in the face of those who oppose
It was not. This has been in the works for a while.
With the release so recent, no one but us had really had a chance to wring them out. I can assure you, though...although our test crew put in some long hours to fast track the testing so we could release before July 1, we didn't skip anything or shortchange it. 6,000 rounds each mag in the endurance test. Drops, crushes, hot, cold, suppressed, platform compatibility...you name it.
How do these do with 300BLK? The rounds/projectiles are heavier, so the % strain on the spring is more than it would be wit a 30 rounder, given proportionately strong springs, I would think, if that makes sense?
Are these reliable with 220gr 300BLK? How about if you drop the mag/ drop hard into prone? Will the round-stack jumble with the added weight, or are these as good as the 30's?
.300 BLK is restricted by bullet ogive, not weight, in a PMAG of any kind. The ribs that guide the bullet sides are meant for 5.56. You can broach the ribs, which we do for some dedicated purposes, and then all .300BLK feeds like butter. With unmodified ribs, it depends on ogive/nose profile.
I was corrected yesterday by one of our engineers. We stayed with 200 cycles on the PMAG40, so instead of 6000 rds, each mag survived 8000 just fine. When I saw endurance test results, I assumed the 6k. I didn't think we'd burn 8k per mag, but that's what they did.
Thank you guys. CO needs to get first dibs so I'll wait. Sure wish we could talk you guys into coming to TN!
vereceleritas
06-28-13, 16:23
Just skimmed the whole thread but I didn't see this addressed yet. Does the MagLink work with PMAG 40's?
Yes it does. Cody is off jumping an IAR with clamped 40 rounders this weekend. We have them clamped together all over the office. Just because. 'Murica.
.300 BLK is restricted by bullet ogive, not weight, in a PMAG of any kind. The ribs that guide the bullet sides are meant for 5.56. You can broach the ribs, which we do for some dedicated purposes, and then all .300BLK feeds like butter. With unmodified ribs, it depends on ogive/nose profile.
I was corrected yesterday by one of our engineers. We stayed with 200 cycles on the PMAG40, so instead of 6000 rds, each mag survived 8000 just fine. When I saw endurance test results, I assumed the 6k. I didn't think we'd burn 8k per mag, but that's what they did.
So the 110gr blacktip, 220smk, and 115 from remington should work flawlessly?
Not necessarily. Let me get the list of what we've tested.
In broached mags, yes, all those work just fine.
In unmodified mags, some rounds work fine, some work fine on semi, but not full auto, some don't work all that great.
Failure2Stop
06-28-13, 17:11
Yes it does. Cody is off jumping an IAR with clamped 40 rounders this weekend. We have them clamped together all over the office. Just because. 'Murica.
Perfectly acceptable reasoning for me.
High fives guys.
Typos brought to you via Tapatalk and autocorrect.
Not necessarily. Let me get the list of what we've tested.
In broached mags, yes, all those work just fine.
In unmodified mags, some rounds work fine, some work fine on semi, but not full auto, some don't work all that great.
I am very interested in the list of "works fine without modification"!
I am interested in these broached mags. Where would one aquire broached mags?
You might PM QuietRiot, I think he talked the "300 BLK mags" them in one of his subsonic test videos.
EDIT: I think this is it: http://shopwilsoncombat.com/AR-Style-Magazine-300-Blackout-30-Round-DH/productinfo/TR-DHMAG30-300BLK/
FWIW, there are a lot of ammunition choices that this is a non-issue. The Barnes 110gr TAC-TX, Remington 125gr Accutip, Remington 115gr UMC, etc. Pretty much any bullet *designed* for Blackout.
If you reload, this might help:
http://www.300blktalk.com/forum/viewtopic.php?f=151&t=79154&start=10#p741365
-john
Slightly off topic, but I note that some retailers carry both the M2 and M3 generation P-Mags. Will both generations continue to be produced or will the M3 eventually be the only style available?
Both will continue for the foreseeable future, and continued co-existence of both products will be evaluated on an ongoing basis. The additional capacity we've built up in both lines will help to allow our move without messing up supply.
Quiet Riot
06-29-13, 14:03
You might PM QuietRiot, I think he talked the "300 BLK mags" them in one of his subsonic test videos.
FWIW, there are a lot of ammunition choices that this is a non-issue. The Barnes 110gr TAC-TX, Remington 125gr Accutip, Remington 115gr UMC, etc. Pretty much any bullet *designed* for Blackout.
If you reload, this might help:
http://www.300blktalk.com/forum/viewtopic.php?f=151&t=79154&start=10#p741365
-john
Unfortunately, I just don't have the ammo available to run a multi-brand 300 BLK test for the PMAG 40 right now. When I reviewed the PMAG 40 with 5.56, I loaded ten 220gr SMKs on top of ten 115gr UMCs for kicks, and it ran fine. However, it doesn't really differ in shape from the PMAG 30 until after 30 rounds are loaded (to state the obvious).
Until I get things together to reload, I think I'll be doing a lot more 300 BLK shooting with my new Gen M3 PMAG 10s than any other mag. :D It does sound like someone at Magpul has done more extensive testing with 300 BLK than I'll be able to do for a long time, though.
http://farm8.staticflickr.com/7378/9161187302_238fda7a12_o.jpg
http://farm8.staticflickr.com/7316/9161182488_988b478251_o.jpg
http://farm8.staticflickr.com/7346/9158964833_8020fa461c_o.jpg
http://farm8.staticflickr.com/7392/9158959195_5405946ff2_o.jpg
Little Creek
07-03-13, 10:22
Both will continue for the foreseeable future, and continued co-existence of both products will be evaluated on an ongoing basis. The additional capacity we've built up in both lines will help to allow our move without messing up supply.
When do you expect to start shipping PMAG 20 LR SR-25 magazines? Will there be any more or will the next ones be PMAG 20 LR/SR GEN M3? Will MidwayUSA or Brownells be among the first to get them?
Still curious about the 300BLK test data and performance/compatibility of specific rounds.
HighDesert
07-03-13, 10:38
Fellas, any of your Brownells pre-orders ship yet? Waiting on 4 from them.
I know they said mid-july, but was assuming they'd ship when Midway and the other big guys shipped theirs out...
http://www.youtube.com/watch?v=H72VApNXjHw
I want to be the tester dude... That would be a fun day at the office... : )
Still curious about the 300BLK test data and performance/compatibility of specific rounds.
Anything put out by Remington has been optimized for ogive compatibility with stock PMAGs. The guys in the back are busy, but I'll try to get some additional info compiled.
PatrioticDisorder
07-03-13, 12:29
Anything put out by Remington has been optimized for ogive compatibility with stock PMAGs. The guys in the back are busy, but I'll try to get some additional info compiled.
http://www.youtube.com/watch?v=_ST-wJ1Ekj8
Nothing scientific but this guy did a review and the .300 blackout seemed to work good for the most part.
*This is for 30 round magazines, IDK what I was thinking by posting it in a thread for 40 round Pmags.*
Little Creek
07-03-13, 12:35
Anything put out by Remington has been optimized for ogive compatibility with stock PMAGs. The guys in the back are busy, but I'll try to get some additional info compiled.
Thanks,
You guys keep them coming and we will keep buying them.
Anxious for a set of the new sights as well.
Need a 3/8 riser for the MOE/CTR stock, The 1/4 is too low and the 1/2 is too high.
JohnsMyName
07-03-13, 16:06
I think I'd prefer the 20 & 30 round mags for weight, but I'd take a few of these to piss the wacktards off.
This...
IIRC, the Gen 2 mags are now being made from the same polymer as the Gen 3's. Accurate?
Where can I get some of these? Seems everyone is out.
Anything put out by Remington has been optimized for ogive compatibility with stock PMAGs. The guys in the back are busy, but I'll try to get some additional info compiled.
Thanks. I use the 110gr TTSX by Barnes (factory blacktip). I hear it is the same as the 115 Remington, so it should be good to go.
skijunkie55
07-03-13, 21:10
http://i594.photobucket.com/albums/tt28/skijunkie55/Mobile%20Uploads/IMG_5589.jpg
My first impression of the 40 round mag after years of only using 20 and 30 rounders:
It's big...
IIRC, the Gen 2 mags are now being made from the same polymer as the Gen 3's. Accurate?
Yes, as of later last year. However, the WAY they are made makes a big difference, moreso than material it seems, and the new polymer is to facilittate this method in the gen 3. So gen 2 only got a mild performance bump. Mainly this matters at very low temps.
*I'm not with magpul, but I asked this months ago, and from what I understand, my above is the condensed answer.
Anyone have a source with PMAG 40s that are in stock?
HighDesert
07-04-13, 13:54
Another flawless 80 through mine this morning :)
http://i292.photobucket.com/albums/mm33/harry1922/20130629_1305370_20130704115233298_zps74131c78.jpg
ColtM4Carbine
07-04-13, 16:53
Fellas, any of your Brownells pre-orders ship yet? Waiting on 4 from them.
I know they said mid-july, but was assuming they'd ship when Midway and the other big guys shipped theirs out...
Waiting on 20.. Still nothing.
http://farm6.staticflickr.com/5521/9214574030_b0af6af535_o.jpg
I received (2) of the PMAG-40's and thus far they have worked very well. This was an initial test only. The loading wasn't difficult and no issues seating it.
I am going to post some pics after the weekend with a little comparison and different info for people to look at.
These may not be for everyone, but I could definitely see a possible use in 3 gun stuff and competition.
I would like to know their applicability in something like the USMC M27 IAR.
G&R tactical had them. I passed on the order when I got to the checkout though due to their $50 min requirement. I just wanted one or two to test to see how well they performed.
Keep an eye out there. Grant made a notification on facebook when he got them in.
I'm kind of thinking that Magpul gave them a good work out before releasing them. Given their stellar track record, I don't think I need to "test them out" before buying a few.
I felt the same way with the 20 rounders I bought that didn't work.
But you're certainly welcome to purchase as many as you can.
http://farm6.staticflickr.com/5510/9215204939_3b62e112d4_o.jpg
skijunkie55
07-06-13, 14:51
40 round pmag ran flawless through 16" mid length and 14.5" carbine. Steel and brass. Both 5.56 and .223 ran great. H buffer on both rifles.
http://farm6.staticflickr.com/5456/9227523152_de86e17464_o.jpg
Just got the email that my 4 on pre-order shipped from Brownells!
SWEET! Got a tracking number yet?
HighDesert
07-09-13, 10:43
SWEET! Got a tracking number yet?
Yes indeed. Was included in the shipping notification email. Shipping via USPS Priority so should be here Thursday...
SWEET! Got a tracking number yet?
Yes indeed. Was included in the shipping notification email. Shipping via USPS Priority so should be here Thursday...
H, L & S...
Sent via Tapatalk
I am actually looking forward to finding a couple of these for open class 3 gun. When I do, I will report back with infinite details. And tracking. :)
Here is a comparison pic of the Surefire 60, the PMAG-40 and a standard PMAG. As you can see the PMAG is somewhat taller than the SF-60 (just under 3/4 inch) according to my measuring tape.
17417
17418
In the prone position it was a little higher, but not to the point where you can't get comfortable. It's obviously not ideal in every situation.
1741717418
ColtSeavers
07-11-13, 23:16
Here is a comparison pic of the Surefire 60, the PMAG-40 and a standard PMAG. As you can see the PMAG is somewhat taller than the SF-60 (just under 3/4 inch) according to my measuring tape.
17417
17418
In the prone position it was a little higher, but not to the point where you can't get comfortable. It's obviously not ideal in every situation.
Thank you for posting this.
I'm kind of thinking that Magpul gave them a good work out before releasing them. Given their stellar track record, I don't think I need to "test them out" before buying a few.
The GEN 2 20 rounders have a less than stellar track record.
HighDesert
07-16-13, 13:57
Another 120 through 3 separate Pmag 40s - Magtech CBC yellow box 556, Independence 556 and Walmart Winchester 556.
All boringly reliable :)
filthy phil
07-16-13, 18:04
Another 120 through 3 separate Pmag 40s - Magtech CBC yellow box 556, Independence 556 and Walmart Winchester 556.
All boringly reliable :)
Ive had good exp with wm 556 too. An arfcommer said its shit. Maybe it was just his gun
HighDesert
07-18-13, 12:32
Ive had good exp with wm 556 too. An arfcommer said its shit. Maybe it was just his gun
More accurate than the Magtech, IMO.
Anyone have a source with PMAG 40s that are in stock?
http://www.midwayusa.com/product/119898?from=pan&cm_lm=sp:tonyrnai@gmail.com&cm_mmc=S_Spop-Email-_-Service_Emails-_-ProdArrival-_-ProductLink%20target=
Now if you miss out again, something is wrong with you.
Sent via Tapatalk
midway is never in stock.
http://farm6.staticflickr.com/5538/9328148359_3217ac12ef_o.jpg
Stupid question from the new guy:can you use the mag clamps for the 30's on these?
I like to keep a couple mags stuck together for around the homestead use :p
PMAG 40
Range Report: 07/25/13
Executive Summary: Forty Rounds, Zero Drama
Loaded 40 Rounds
Inserted Mag
Released Bolt Catch
Disengaged Safety
Pulled Trigger 40 times
Bolt Locked Back
Pushed Mag Release
Mag Dropped Free
Conclusion: Except for being slightly longer and holding more
rounds, this mag is virtually identical in form and function to the PMAG
20 and PMAG 30*.
*I have no experience with the PMAG 10
PMAG 40
Range Report: 07/25/13
Executive Summary: Forty Rounds, Zero Drama
Loaded 40 Rounds
Inserted Mag
Released Bolt Catch
Disengaged Safety
Pulled Trigger 40 times
Bolt Locked Back
Pushed Mag Release
Mag Dropped Free
Conclusion: Except for being slightly longer and holding more
rounds, this mag is virtually identical in form and function to the PMAG
20 and PMAG 30*.
*I have no experience with the PMAG 10
I had the exact same experience last night at the range.
I'm not sure which one is harder to come by...
The Pmag 40 or the Magpul Girl (decal)?
17590
The PMAG 40 should be much easier to come by very soon.
Got one from Midway this week for trial. They only let me order one, but it looks great. Also have some 10 rd mags on order, should be useful for bench rest shooting, etc.
The PMAG 40 should be much easier to come by very soon.
How 'bout windowed PMAG 40s?
:-)
-john
They look ridiculous on an SBR. I might just buy one to see how it feels but I'm guessing my Tromix SBS with a surefire 12rounder would probably be a good indicator.
ennbeegunny15
07-27-13, 19:15
hat's off for that... especially with all the bozos on FB accusing you guys of 'folding to pressure' etc when you released the 10 rounders. =]
Living in the libtard state of Ca, I'm thankful for the 10 rounders. I hate the fact that I have to use them, but till I leave, these 10 rounders will fit the bill.
ennbeegunny15
07-27-13, 19:17
PMAG 40
Range Report: 07/25/13
Executive Summary: Forty Rounds, Zero Drama
Loaded 40 Rounds
Inserted Mag
Released Bolt Catch
Disengaged Safety
Pulled Trigger 40 times
Bolt Locked Back
Pushed Mag Release
Mag Dropped Free
Conclusion: Except for being slightly longer and holding more
rounds, this mag is virtually identical in form and function to the PMAG
20 and PMAG 30*.
*I have no experience with the PMAG 10
The 10 rounders work like a champ.
skijunkie55
07-30-13, 14:44
http://www.youtube.com/watch?v=cjx4KSKHIC4&list=UUhk5eyAGuO3J4rV-CiMNkNQ
He may have enjoyed this way too much :)
Well, in a hopeful sign, at least now Brownells let me place a backorder for three, have not been able to do that until this week.
Duane L. Can you give me date when FDE 30,40 rd. mags will be for sale?
Colored M2/MOE mags should be coming back soon. There are currently no plans to introduce colors for the 40 or for the GEN M3 line, although it's not completely off the table.
This 40rnd mag is really where the windowed option would be beneficial.
This 40rnd mag is really where the windowed option would be beneficial.
Yes, we strongly considered going just with a windowed version. In the end, we went non-window first. We'll see what transpires for future stuff. We've got a LOT of things we're trying to move through the system right now.
Yes, we strongly considered going just with a windowed version. In the end, we went non-window first. We'll see what transpires for future stuff. We've got a LOT of things we're trying to move through the system right now.
Any efforts on translucent mags?
Thanks.
There are currently no plans to introduce colors for the 40 or for the GEN M3 line, although it's not completely off the table.
thats completely fine with me. i would rather:
#1 you make different products rather than the same product in different colors.
#2 you focus on increasing global supply as fast as possible
Why would anyone want/need colors anyway?
I mean, who gives a crap in the real world?
What's with the orange, pink and other hideous colors.
I think they ought to go with the Henry Ford policy:
"You can have any color you want, as long as its black."
If colors matter get some Krylon. Don't forget to bring the Prada purse to make sure it all matches.
I've heard that black polymer is a bit more durable than other colors. I'm not a chemist or engineer so that may be just Internet musings.
If you Google search the site, you will see it was discussed with none other than someone from Magpul.
I've heard that black polymer is a bit more durable than other colors. I'm not a chemist or engineer so that may be just Internet musings.
So anyone have any updates on who has them in stock?
I got my 1 from Midway last week: makes the MK18 look tiny.
http://i6.photobucket.com/albums/y218/gw4k/9531a4c5-606e-4dd7-8611-e4d8a344af3b_zps02902436.jpg
So anyone have any updates on who has them in stock?
They were listed in the Where Can I Get It thread less than a day ago.
http://www.azarmament.com/PMAG-40-AR-M4-GEN-M3-556x45-Magazine-MAG233.htm
Sent via Tapatalk
Found some available here @ Intense Tactical (http://www.intensetactical.com/Magpul-Pmag-GEN-M3-40-Round-Mag.html)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.