PDA

View Full Version : Anyone tried the BCM "Trigger Guard Insert" on a KAC Mod1??


Razorhunter
07-16-13, 11:58
Been seeing this little item in the magazines. Anyone know if it works on a KAC Mod1 trigger guard, in conjunction with a Magpul grip, or do they only work with BCM grips or what? Any pics of this item installed, or further info would be greatly appreciated guys.
mtdawg169
07-16-13, 12:04
What is it?
SwatDawg15
07-16-13, 12:15
I assume your talking about the small insert that comes with the gunfighter grips.. I don't think you would need them with the KAC or magpul trigger guards, as I believe both of those eliminate the small gap.
Plumber237
07-16-13, 12:28
I assume your talking about the small insert that comes with the gunfighter grips.. I don't think you would need them with the KAC or magpul trigger guards, as I believe both of those eliminate the small gap.

I can vouch for not needing it with the magpul tripper guard, I tried it just to see if it did anything noticeable, and it does nothing except make the trigger guard "fatter" for the length of the insert. The flush insert for the gunfighter grip with the magpul trigger guard works perfect.
ScatmanCrothers
07-16-13, 12:32
They won't work with a Magpul grip. Specifically designed for the BCM grip and snap into place. I always used the flat piece myself though since the extended piece pushed my middle finger down further on the grip.
Koshinn
07-16-13, 14:15
I assume your talking about the small insert that comes with the gunfighter grips.. I don't think you would need them with the KAC or magpul trigger guards, as I believe both of those eliminate the small gap.

The KAC doesnt quite eliminate the gap.
WS6
07-16-13, 14:27
The KAC doesnt quite eliminate the gap.

What more do you want?
http://i43.tinypic.com/qqah6p.jpg

Here is a Magpul that I found online for comparison:
http://c.shld.net/rpx/i/s/pi/mp/22460/6370477005p?src=http%3A%2F%2Fwww.riverconnection.com%2FSporting-Goods-BRS%2FShooting-Sports%2FMagPul-Mag417-FDE-Moe-Trigger.jpg&d=0e56f1c1abe74762418a4a8d1f70cbe9487a1bc9
Dos Cylindros
07-16-13, 14:27
The KAC doesnt quite eliminate the gap.

I agree, I have a KAC trigger guard and the gap is there. I run a Tango Down grip which has the duck bill gap extension, so I would assume you will have no issues with the BCM insert.
buckjay
07-16-13, 14:32
I just run a cut down ergo gapper ($2) with my KAC trigger guards.

http://buckjay.com/drop/sell/fde-urx-14-3.jpg
trauma
07-16-13, 15:36
The past versions of the KAC trigger guard had a gap, newer versions are as pictured above.
mtdawg169
07-16-13, 18:29
I just run a cut down ergo gapper ($2) with my KAC trigger guards.

http://buckjay.com/drop/sell/fde-urx-14-3.jpg








The past versions of the KAC trigger guard had a gap, newer versions are as pictured above.

Yep. I run a super tactical gapper on my older KAC lower and my newest one doesn't need one.
Koshinn
07-16-13, 19:57
The past versions of the KAC trigger guard had a gap, newer versions are as pictured above.

Even the newer ones don't fill in the gap enough, I can still rub my middle finger raw if shooting without gloves. Magpul trigger guard usually does the trick, but not always.
RWH24
07-16-13, 21:46
The shelf piece for the BCM MOD1 would not go all the way up into position with the Magpul enhanced trigger guard for me.
It would be nice if it did.
Bluto
07-17-13, 08:05
After rubbing my finger raw, I use the ergo grip grip gapper. It doesn't just fill the gap, but extends over the trigger guard just a tiny bit. Prevents you from digging into the corner.
Razorhunter
07-17-13, 08:40
Yep. I run a super tactical gapper on my older KAC lower and my newest one doesn't need one.

What's a super tactical rapper? The Ergo gapper, or something else?