B&C Stock comb height?

[ilmonster]

I have a Rem. 700 SPS Tac in .223 I picked up and have begun shooting. On the Hogue, I'm currently using a Traid stock pack with close to 1" worth of spacers in it to get my head up high enough to see through my Vortex scope.

I would like to replace the Hogue stock that came standard with it with a Bell & Carlson, but want the highest comb stock I can without going with the heavy A5 Adj. stock of theirs. So my question is, of the B&C Medalist Type 2 (2092), Type 3 (2956 hook) or Type 4 (1000 M40) stocks, which has the highest comb?

I've looked on B&C's site, and they make no mention of comb heights.

[The_Count]

The M40 has the highest comb.

[R-762wt]

M40 has the highest. If you need to adjust you can just add camping mat for shims.

[ilmonster]

I was kind of assuming the M40 had the highest comb as B&C had to create a cutout/slot in the front end of the comb to allow the bolt to be removed.

I did have one person tell me the 2092 Type 2 had the highest comb, which didn't quite make sense as one could remove the bolt with no cutout in the front of the comb, right?