JCIN
12-07-13, 11:39
I have wanted to build a precision oriented AR for awhile so I finally put one together.
http://farm3.staticflickr.com/2873/11254083695_146f4292a6_o.jpg
http://farm4.staticflickr.com/3756/11254032413_b894951d2c_o.jpg
http://farm4.staticflickr.com/3708/11253976206_8e6318d8bb_o.jpg
http://farm4.staticflickr.com/3732/11253945965_fe72379633_o.jpg
http://farm6.staticflickr.com/5508/11253940725_51b0656e3b_o.jpg
http://farm8.staticflickr.com/7414/11254035013_944c832d8b_o.jpg
http://farm8.staticflickr.com/7431/11254039203_cdc21ffe70_o.jpg
Specs:
Noveske Gen 2 lower
Noveske NSR 16.7 Rail
White Oak Armament 18" Stainless SPR barrel w/ rifle length gas system (Gave up on trying to find a Noveske barrel)
Vltor MUR-1 Upper
Vortex 2.5-10x44
Geissle SSA-E
BAD-ASS 45 Degree Ambi Saftey
DPMS Miculek Comp
Magpul UBR
Larue Grip
Larue/Harris Bipod
I am extremely pleased with the NSR rails. After this build I bought a 13.5 to go on one of my 14.5 rifles. They are the heat. The rifle is a blast to shoot and would make a decent 3 gun rifle with just swapping out the optic. I'm still working on a load for it and the group shown was from the first outing. I did an OCW test with 77gr Noslers and Varget then shot a few groups with the loads that looked promising. All were sub MOA.
I would of preferred to use a Noveske barrel just because but I am very pleased with the WOA so far. The fact it costs half as much as a Noveske (if I could find one) doesnt hurt my feelings any either. The WOA was $270 and in stock at Brownells. The UBR stock I'm not sure about yet. I had it laying around and decided to use it. Its heavy as balls. I may ditch it for a Larue stock or CTR with Riser. Time will tell.
Overall the build came out awesome. I was hitting 8" plates at 600 with it the first day and thats about all I expect out of it so it should be good to go.
http://farm3.staticflickr.com/2873/11254083695_146f4292a6_o.jpg
http://farm4.staticflickr.com/3756/11254032413_b894951d2c_o.jpg
http://farm4.staticflickr.com/3708/11253976206_8e6318d8bb_o.jpg
http://farm4.staticflickr.com/3732/11253945965_fe72379633_o.jpg
http://farm6.staticflickr.com/5508/11253940725_51b0656e3b_o.jpg
http://farm8.staticflickr.com/7414/11254035013_944c832d8b_o.jpg
http://farm8.staticflickr.com/7431/11254039203_cdc21ffe70_o.jpg
Specs:
Noveske Gen 2 lower
Noveske NSR 16.7 Rail
White Oak Armament 18" Stainless SPR barrel w/ rifle length gas system (Gave up on trying to find a Noveske barrel)
Vltor MUR-1 Upper
Vortex 2.5-10x44
Geissle SSA-E
BAD-ASS 45 Degree Ambi Saftey
DPMS Miculek Comp
Magpul UBR
Larue Grip
Larue/Harris Bipod
I am extremely pleased with the NSR rails. After this build I bought a 13.5 to go on one of my 14.5 rifles. They are the heat. The rifle is a blast to shoot and would make a decent 3 gun rifle with just swapping out the optic. I'm still working on a load for it and the group shown was from the first outing. I did an OCW test with 77gr Noslers and Varget then shot a few groups with the loads that looked promising. All were sub MOA.
I would of preferred to use a Noveske barrel just because but I am very pleased with the WOA so far. The fact it costs half as much as a Noveske (if I could find one) doesnt hurt my feelings any either. The WOA was $270 and in stock at Brownells. The UBR stock I'm not sure about yet. I had it laying around and decided to use it. Its heavy as balls. I may ditch it for a Larue stock or CTR with Riser. Time will tell.
Overall the build came out awesome. I was hitting 8" plates at 600 with it the first day and thats about all I expect out of it so it should be good to go.