What is this AK set up? (pic)

[JG007]

Not my picture, saw it in shot show coverage for the new magpul AK magazine

http://www.itstactical.com/wp-content/uploads/2014/01/0282.jpg



in case embedding the link doesnt work, the pic itself was too big

http://www.itstactical.com/wp-content/uploads/2014/01/0282.jpg

[Dave_M]

Looks like a Kreb's Custom build (and if not built by Krebs, put together out of a lot of Kreb's parts).

Probably started out life as a Draco pistol.
Front to back--

Muzzle device:
http://www.krebscustom.com/products/19/Krebs-Custom-4-Prong-Flash-Suppressor-for-AKM-AK74-Rifles-14x1-Thread

Keymod Forend (looks like some fitting was done to fit around the FSB/GB)
http://www.krebscustom.com/products/81/Krebs-Custom-UFM-Keymod-System-for-AKM-Rifles

Magpul RVG mounted on forend

Galil charging handle welded on

Magwell funnel appears to be a Krebs

Extended mag release. Probably custom done, looks like a cleaner version of what BlackJackBuffers used to sell

Enhanced Safety Selector (the one linked has the cutout for a manual BHO but the pic shows an unslotted version)
http://www.krebscustom.com/products/58/Krebs-Custom-Mk-VI-Enhanced-Safety-for-Stamped-Rifles

Rear sight configuration I've seen before but don't recall that particular one (basically a take on a Galil/Valmet rear iron)

Magpul AK grip

ACE AR-folding stock mechanism + Sling mount end plate + Magpul CTR

[Dave_M]

Posted the pic for ya'
http://www.itstactical.com/wp-content/uploads/2014/01/0282.jpg

[96 SS]

It's a very interesting rifle indeed - and HAS to be a Krebs gun, not assembled by someone else.

What I see:
It's a Speed Load Tactical (mag funnel and mag ejection system)
It also has a KV-13 rear sight/dust cover.

The rest is noted above with the new Krebs Keymod AK rail, Krebs FH, Magpul grips and stock and what looks to be an ACE based rear stock setup.

Very very interesting custom from Marc!

[7.62WildBill]

Magpul has pics of this AK and the one to it's left on their Facebook page. They're both Kreb's guns; the SBR is a Saiga and the other a VEPR. I'm a big fan of that stock/grip set-up!

My M92
http://i1054.photobucket.com/albums/s488/wildwoodbill000/945cda9b-318e-4d40-88ce-04a07e5dd2b1_zps6aa96231.jpg (http://s1054.photobucket.com/user/wildwoodbill000/media/945cda9b-318e-4d40-88ce-04a07e5dd2b1_zps6aa96231.jpg.html)

[Dave_M]

It also has a KV-13 rear sight/dust cover.

Ah thanks! (Seems like it should have been obvious, given the other Kreb's stuff ;) )

[doodi1]

It's a full on Krebs custom, built most likely on a Mini Draco pistol base. It's sexy as all hell!

[7.62WildBill]

It's a full on Krebs custom, built most likely on a Mini Draco pistol base. It's sexy as all hell!

Magpul said it's a Saiga on their Facebook page. A very sweet one!

[doodi1]

Magpul said it's a Saiga on their Facebook page. A very sweet one!

Wow! there is a LOT of work to make a Saiga look like that. It looks like they have shortened the gas system and even used a custom shorter version of their UFM Keymod rail with a cut-out around the gasblock/front sight. Now that i look closer, the gasblock/front sight is the same one they used on their KTR models.

[Dave_M]

Wow! there is a LOT of work to make a Saiga look like that. It looks like they have shortened the gas system and even used a custom shorter version of their UFM Keymod rail with a cut-out around the gasblock/front sight. Now that i look closer, the gasblock/front sight is the same one they used on their KTR models.

Marc does great work.