slybarman
04-18-14, 19:43
Has never been fired. No BCG or CH
Going in a different direction with my build. Details can be found here:
http://palmettostatearmory.com/index.php/psa-16-chf-mid-length-ultra-light-weight-sqr-15-upper-without-bcg-or-charging-handle.html
I weighed the upper w/o BCG or CH but with BUIS = 3lbs 14oz.
16" Barrel length
Cold Hammer Forged
Chrome Lined Bore
5.56 NATO Chamber
1:7" Twist
M4 Feed ramps
.750 low profile gas block
A2 Flash Hider
15" SQR Rail
Forged upper receiver
T-Marks
A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its required use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a mid-length gas system. The Special ultra lightweight profile barrel has a conventional .750" gas block diameter, is Mil-spec phosphate coated, High Pressure tested and Magnetic Particle inspected. The weight of the barrel splits the difference between our light profile and our pencil barrel. Barrel is finished off with a PSA 15" SQR Free float rail, low profile gas block, and A2 flash hider.
Barrel is made for PSA by FN right here in South Carolina.
Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer.
No waiting for a sale or order fulfillment - can be yours this weekend.
2527525276
$450.00
Local pick-up in Maryland or I can ship. Buyer pays actual shipping, not to exceed $15.00.
Will accept PayPal (will split fees), check or MO. If check or MO, I will not ship until funds clear.
Going in a different direction with my build. Details can be found here:
http://palmettostatearmory.com/index.php/psa-16-chf-mid-length-ultra-light-weight-sqr-15-upper-without-bcg-or-charging-handle.html
I weighed the upper w/o BCG or CH but with BUIS = 3lbs 14oz.
16" Barrel length
Cold Hammer Forged
Chrome Lined Bore
5.56 NATO Chamber
1:7" Twist
M4 Feed ramps
.750 low profile gas block
A2 Flash Hider
15" SQR Rail
Forged upper receiver
T-Marks
A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its required use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a mid-length gas system. The Special ultra lightweight profile barrel has a conventional .750" gas block diameter, is Mil-spec phosphate coated, High Pressure tested and Magnetic Particle inspected. The weight of the barrel splits the difference between our light profile and our pencil barrel. Barrel is finished off with a PSA 15" SQR Free float rail, low profile gas block, and A2 flash hider.
Barrel is made for PSA by FN right here in South Carolina.
Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer.
No waiting for a sale or order fulfillment - can be yours this weekend.
2527525276
$450.00
Local pick-up in Maryland or I can ship. Buyer pays actual shipping, not to exceed $15.00.
Will accept PayPal (will split fees), check or MO. If check or MO, I will not ship until funds clear.