PDA

View Full Version : Glock RmR combo concealment holsters options


Captain_Smollet
04-26-14, 02:26
I am looking for a good IWB/OWB concealment holster for a 19G+RMR combo.

From a brief research I see that Raven is an only option available ? Is a Bravo Concealment with short sweat shild will fit ?

Thx
J_B
04-26-14, 04:01
Off The Grid Concepts has an option for RMR'd Glock.
Just Prince
04-26-14, 09:14
Try the Phlster.
http://www.phlster.com/
Up1911fan
04-26-14, 09:25
JM Custom can make one too. Just let him know when you order.
serbonze
04-26-14, 14:08
I picked up mine from HBC Concealment. Charles will take care of you.

https://www.facebook.com/Holstersbycharles?ref=ts&fref=ts

http://i12.photobucket.com/albums/a245/Serbonze/CX4/imagejpg1_zps439ebb31.jpg

http://i12.photobucket.com/albums/a245/Serbonze/CX4/imagejpg1_zps5d5d6a38.jpg
Captain_Smollet
04-26-14, 23:46
Thanx every one :)
mpardun
04-27-14, 10:05
Josh @ Wilder Tactical does a very nice job and it is RMR friendly
http://www.wildertactical.com/owb/

Here is my G34 RMR
25467
victoriouslv
05-06-14, 07:08
I have found that most standard kydex holsters can be easily modified to handle carry with an RMR. I used the usual hair dryer/dremel wheel to modify a comptac Minotaur and older blade-tech IWB with X300 for daily carry.
http://img.tapatalk.com/d/14/05/06/abeheva8.jpg
http://img.tapatalk.com/d/14/05/06/epama5a5.jpg
http://img.tapatalk.com/d/14/05/06/3e2u7y9u.jpg
http://img.tapatalk.com/d/14/05/06/ename2av.jpg
http://img.tapatalk.com/d/14/05/06/ety9u6uh.jpg
99superduty
05-06-14, 08:50
Dale Fricke Archangel for AIWB carry.
HardToHandle
05-06-14, 15:00
Dale Fricke Archangel for AIWB carry.
Works very well.
titsonritz
05-07-14, 16:13
Dale Fricke Archangel for AIWB carry.


Works very well.

The Seraphim is an Archangel cut for an RMR.

http://dalefrickeholsters.com/product/seraphim-rmr-appendix-carry/
Spiffums
05-09-14, 13:03
I have found that most standard kydex holsters can be easily modified to handle carry with an RMR. I used the usual hair dryer/dremel wheel to modify a comptac Minotaur and older blade-tech IWB with X300 for daily carry.
http://img.tapatalk.com/d/14/05/06/abeheva8.jpg


I just cut down my MTAC in the edge near the RMR till it fit.
bikerdog
05-09-14, 13:12
Just about any good kydex holster can be cut for the rmr. I also know that gcode is now offering there incog with an rmr cut. I just placed on order for one. But I think the wait right now is insane for them. Personally right now though I just carry mine in a bravo concealment OWB that I cut with a dremmel, I am very happy with it.
BTL BRN
05-09-14, 14:35
The only caution I would give to using an existing holster and simply cutting the hood for the RMR is that the suppressor sights might become an issue, they seem to require a raised area for proper clearance.

Another +1 for Dale Fricke's offerings, I have a Seraphim on my belt as I type.
bighawk
05-12-14, 16:27
Veil solutions makes a few different holsters but this one is the only IWB/OWB holster. He makes solid stuff and is prety quick to respond when you email him.
http://veilsolutions.com/products-page/product-category/vampire-3
mpardun
05-12-14, 18:23
I've been very happy with my Wilder OWB holsters: http://www.wildertactical.com/owb/
2582525827
Retailed for $85. Here us a pic with my G34 RMR, FITS G17 and G19 equally well. Very well made, reasonably priced - worth a try! I own RCS, Griffon, CompTac and Blade Tech...and Wilder is my fav. Also have their M&P9 and Shield version too.
Steve S.
05-12-14, 22:43
Just ask Trijicon. They've weeded them out pretty well.

For what it's worth - Dale Fricke and BladeTech were supporting RMRs before my company started. Back then no one wanted to do an RMR cut and just said no.

I think there's something to be said for that - or at least remember those two companies for embracing the future of handguns before anyone else seemed to care.
CQC.45
05-13-14, 12:04
Just ask Trijicon. They've weeded them out pretty well.

For what it's worth - Dale Fricke and BladeTech were supporting RMRs before my company started. Back then no one wanted to do an RMR cut and just said no.

I think there's something to be said for that - or at least remember those two companies for embracing the future of handguns before anyone else seemed to care.

As someone who carries an RMR'd G19 every day and is extremely familiar with RMR/pistol applications due to the nature of my work in the industry, I strongly recommend PerSec Systems for concealment options and Safariland if you require active retention. Of course there are other companies which support RMR pistols, but those are my personal preferences.
Spiffums
05-14-14, 05:36
Just ask Trijicon. They've weeded them out pretty well.

For what it's worth - Dale Fricke and BladeTech were supporting RMRs before my company started. Back then no one wanted to do an RMR cut and just said no.

I think there's something to be said for that - or at least remember those two companies for embracing the future of handguns before anyone else seemed to care.


They also had options for a hood to protect the sight.