PDA

View Full Version : Chamfer/debur tool, drill press compatible?


dpete
06-30-14, 13:00
Can anyone recommend a case neck chamfer/debur tool that will do the inside and outside of a case neck at the same time that could be modified or used directly from the package in a drill press?
markm
06-30-14, 15:00
Can anyone recommend a case neck chamfer/debur tool that will do the inside and outside of a case neck at the same time that could be modified or used directly from the package in a drill press?

Not sure if such a thing exists. I think you might have some luck on Sinclair's site.
jstone
07-01-14, 16:17
Look at the 3 way trimmer head from rcbs im sure it coud be adapted to do what your wanting to do
QuietShootr
07-01-14, 17:21
Can anyone recommend a case neck chamfer/debur tool that will do the inside and outside of a case neck at the same time that could be modified or used directly from the package in a drill press?

Forster makes what you seek.
cwgibson
07-01-14, 18:07
Looks interesting:

http://www.forsterproducts.com/catalog.asp?prodid=700216


Sent from my iPad using Tapatalk HD
T2C
07-01-14, 18:54
Looks interesting:

http://www.forsterproducts.com/catalog.asp?prodid=700216


Sent from my iPad using Tapatalk HD


Thanks for the link. That looks like it would work well and save a few steps.

I have a RCBS case trimmer, so I am going to have to order this one...........http://www.midwayusa.com/product/251948/rcbs-trim-pro-case-trimmer-3-way-cutter-30-caliber?cm_vc=ProductFinding
jstone
07-02-14, 11:40
The rcbs 3 way trimmer is great and gives excellent results. The case come out with a nice chamfer and no burr once you have it set up it saves some time. I have the 22 and 30 cal. Untill I get a giraud I will get one for each caliber I load.
T2C
08-28-14, 08:41
The rcbs 3 way trimmer is great and gives excellent results. The case come out with a nice chamfer and no burr once you have it set up it saves some time. I have the 22 and 30 cal. Untill I get a giraud I will get one for each caliber I load.

I just picked up the RCBS .30 caliber 3 way trimmer and prepped a bunch of 30-06 brass. It works really well and saves quite a bit of time.

My only regret is that I did not buy one ten years ago.
cwgibson
08-28-14, 09:30
Giraud has a new trimmer out as well that can be chucked in a drill.


Sent from my iPad using Tapatalk HD
rcoodyar15
08-28-14, 10:38
Giraud has a new trimmer out as well that can be chucked in a drill.


Sent from my iPad using Tapatalk HD


I have the 3 way forster and the Giraud. Go Giraud and you will never look back.
opsoff1
08-28-14, 21:53
Try the WFT or WFT 2 at http://www.littlecrowgunworks.com/index.html
or the Giraud Tri Way - check these out: http://bulletin.accurateshooter.com/tag/case-trimmer/
jstone
08-29-14, 00:29
I just picked up the RCBS .30 caliber 3 way trimmer and prepped a bunch of 30-06 brass. It works really well and saves quite a bit of time.

My only regret is that I did not buy one ten years ago.

Glad you like them I think they are great. I think I may pick up one of the new girauds. I will only need 3. One for 223/556, 30-06, and 243 when I get that project going.
opsoff1
08-31-14, 14:18
Glad you like them I think they are great. I think I may pick up one of the new girauds. I will only need 3. One for 223/556, 30-06, and 243 when I get that project going.
What's the wait time for a Giraud these days?
Whiskey&beer
08-31-14, 14:36
I just had another Giraud delivered Friday and it was about 7 weeks from order to my door. I was told its about a week for production times on the Tri-way.
Suwannee Tim
09-01-14, 20:03
A drill press turns too fast. Use a power screwdriver. Here are some tools. (http://www.midwayusa.com/product/394805/lyman-power-chamfer-and-deburring-tool-set) There are others.
rcoodyar15
09-02-14, 07:56
What's the wait time for a Giraud these days?

I got the new tri-way

Called them on thursday and she said he would build it over the weekend

and I recieved it tuesday