Tactical bolt action rifle picture thread

[usmcchet9296]

I don't see any thread like that here and since I will be picking up my Remington 700 SPS .233 here very soon id like to see pictures of some of your rifles.

[Robb Jensen]

Still a work in progress.

http://img.photobucket.com/albums/v408/gotm4/2e615209.jpghttp://img.photobucket.com/albums/v408/gotm4/61508266.jpg

[Dave L.]

http://i123.photobucket.com/albums/o309/laninga66/GAPrifle1.jpg
http://i123.photobucket.com/albums/o309/laninga66/GAPrifle006.jpg
31.5 inches folded, removing the Flash hider makes it about 30.5 inches folded.
http://i123.photobucket.com/albums/o309/laninga66/GAPrifle003.jpg
http://i123.photobucket.com/albums/o309/laninga66/GAPrifle011.jpg
Just over 1/2 inch at 100 yards- 5,6,7th shots...so much for break in...

GAP built this for me- it was worth the 5K

*These pics are from when it was new...it's been dragged many times since then.

[Seagrave7]

Remington 700 sps tactical
Leupold 4.5-14x50

http://i301.photobucket.com/albums/nn60/Seagrave77/IMG_3778b.jpg

http://i301.photobucket.com/albums/nn60/Seagrave77/IMG_3809b.jpg

[usmcchet9296]

Remington 700 sps tactical
Leupold 4.5 x 14 50mm

http://i301.photobucket.com/albums/nn60/Seagrave77/IMG_3778b.jpg

Thats what Ill be picking up on the 24th (DROS)

question what size rings did you use low or medium?

[Seagrave7]

Thats what Ill be picking up on the 24th (DROS)

question what size rings did you use low or medium?

I went with Badger Ordnance Medium Rings (306-20). Base is a Leupold Mark 4.

[PRGGodfather]

http://i154.photobucket.com/albums/s257/eanormandy/Guns/Sierra1.jpg

http://i154.photobucket.com/albums/s257/eanormandy/Guns/Sierra1.1.jpg

[JBRIII]

http://i154.photobucket.com/albums/s257/eanormandy/Guns/Sierra1.1.jpg[/QUOTE]

Love the Manner's Stock!!! Just got one on my FN. As soon as I get it back nextr week form coating, I will post some pic's

[03humpalot]

My Gap Rock with a rock creek tube on her up at McMillan a few years ago, i was trying the TMR reticle for the first time before deciding to keep the optic or not..me likey
http://img64.imageshack.us/img64/5967/contractors1mediumas4.jpg
and painted up, im rocking a TIS quick cuff sling on her these days, good piece of gear.
http://img143.imageshack.us/img143/9892/rockiimediumoy0.jpg

[PRGGodfather]

Yes the Manners stock is GTG. Tom Manners is top notch. Fast, clean and takes care of cops.

Mike Miller makes a good sling. The Quick Cuff works.

[Dave L.]

My Gap Rock with a rock creek tube on her up at McMillan a few years ago, i was trying the TMR reticle for the first time before deciding to keep the optic or not..me likey



I was shooting off that same slab a few months ago- Great course- was that the 2 week WarFighter?

How did that dude like his Choate Stock?
http://i123.photobucket.com/albums/o309/laninga66/DSC02329.jpg

Dave

[03humpalot]

It was a sniper/counter sniper/advanced sniper combined package.

He was good with the choate while in the prone but quickly realized it was a piece of shit when shooting offhand/over cover etc...He has good glass and a McMillan stock on it now i believe.

[k9dpd]

Remington 700 sps tactical
Leupold 4.5-14x50

http://i301.photobucket.com/albums/nn60/Seagrave77/IMG_3778b.jpg

http://i301.photobucket.com/albums/nn60/Seagrave77/IMG_3809b.jpg

I have the exact same setup.

[sl4mdaddy]

Not the greatest pic but it'll suffice. My 700P, soon to be rattle-canned:

http://i126.photobucket.com/albums/p116/gdvan01/Firearms/700P.jpg

[TRguy]

Not an expensive rig but Savage is making a great rifle.

http://i271.photobucket.com/albums/jj131/TRguy/SavageModel12.jpg

Model 12 .243

3rds are 100yds

http://i271.photobucket.com/albums/jj131/TRguy/SavageModel12-1.jpg

Read the article on Savages Precision team.....Savage is the real deal.

http://www.savagearms.com/BreakingNews052208.htm

[outdoorsmen]

i'd take the savage on a good stock anyday. i'm thinking of getting a model 12f/tr.

[cyclone72]

http://i248.photobucket.com/albums/gg187/cyclone72_bucket/HPIM1017.jpg

http://i248.photobucket.com/albums/gg187/cyclone72_bucket/HPIM0816.jpg

http://i248.photobucket.com/albums/gg187/cyclone72_bucket/HPIM0820.jpg

http://i248.photobucket.com/albums/gg187/cyclone72_bucket/HPIM0872.jpg

http://i248.photobucket.com/albums/gg187/cyclone72_bucket/HPIM0807.jpg

http://i248.photobucket.com/albums/gg187/cyclone72_bucket/HPIM0885.jpg

300 yds group,not too bad.

http://i248.photobucket.com/albums/gg187/cyclone72_bucket/HPIM0823.jpg

100yds

[USMC03]

Remington 700 LTR .308 w/ Leupold MKIV MR/T 3.5-10x40 M3:

http://i278.photobucket.com/albums/kk99/USMC03_photos/Rem%20700%20LTR/DSC02371a.jpg?t=1214184736



S/F,
Jeff

[Cameron]

FN PBR XP .308Win 20" medium fluted barrel with Leupold 4.5-14x50mm MK4 LR/T TMR Reticule
http://i886.photobucket.com/albums/ac61/gstuffnow/FNPBRXP-1.jpg


http://i886.photobucket.com/albums/ac61/gstuffnow/FNPBRXP.jpg

[usmcchet9296]

Lets see..............
Rifle.....Check Remington 700 sps in .223/5.56
Scope .....Check Falcon Menace 4.5-18x56 MP20 Mil
Base..... Check IOR 20MOA
Bipod.....Check Harris 6x9 swivel/leg notch
Rings............................................................................................. Damnit Burris XTR on medium on back order
http://www.oniva.com/upload/204/remey700sps_2.JPG

http://www.oniva.com/upload/204/remey700sps_3.JPG

http://www.oniva.com/upload/204/remey700sps.JPG

More to come

[friedcheese]

http://i204.photobucket.com/albums/bb5/FRIED303/c570e28f-1.jpg
http://i204.photobucket.com/albums/bb5/FRIED303/GUNZ/DONE_camo_rifle003.jpg
http://i204.photobucket.com/albums/bb5/FRIED303/GUNZ/a793f516.jpg

[usmcchet9296]

Got my rings this weekend and put my Remey togather
Here are the pictures
No its not finished but its close

http://www.oniva.com/upload/204/remington700sps.JPG

http://www.oniva.com/upload/204/remington700sps_2.JPG

http://www.oniva.com/upload/204/remington700sps_4.JPG

http://www.oniva.com/upload/204/remington700sps_3.JPG

It took forever to get a decent zero on my rig because it was real windy at ASR but this is the best group I had
it isnt that great but the barrel isnt broken in and the accupod while great is really squishy on the Houge stock, its kinda like shooting on Jello
next outing Ill sandbag it to get a proper gauge of how it shoots

http://www.oniva.com/upload/204/6-28-08.JPG

[RedMan*]

...............

[cyclone72]

Stu,How is the 260 in comparison to the 308 in regards to LR shooting,I have HEARD it is just as good or better and easier to reload.

[RedMan*]

I own both, .308 & .260
Both in McMillan A3's. Another .223 is being built as I type this in another A3 (yes I have a McMA3 fetish)
For comps that are not caliber specific I will always shoot the .260

Whatever my dope for wind is on the .308 I have in the past used just less than half value for my .260.
My come-ups are less also.

As far as the claim that the .260 kicks less then a .308.......I personally can't tell the differance between either of mine.

Not sure if you can read what my load is so I'll post it:

Remington RP brass
Primer pocket cleaned
Primer hole cleaned
Inside & outside neck chamfered
CCI BR 2 primers
41.7 gr. of H4350
Sierra 142 BTHP
Loaded to 2.820

This load is a work up that I have done that works extremely well in rifle.
Caution: work up to this load and check for pressures in your stick.

I'm not sure that reloading a .260 is any easier than ________ but it's pretty straight foreward.

FWIW,
Stu

[Fletch/AAC]

http://i247.photobucket.com/albums/gg131/fletcher-aac/_MG_0020.jpg
http://i247.photobucket.com/albums/gg131/fletcher-aac/_MG_0019.jpg
http://i247.photobucket.com/albums/gg131/fletcher-aac/_MG_0032.jpg
http://i247.photobucket.com/albums/gg131/fletcher-aac/_MG_0011.jpg
http://i247.photobucket.com/albums/gg131/fletcher-aac/_MG_0031.jpg
http://i247.photobucket.com/albums/gg131/fletcher-aac/_MG_0030.jpg
http://i247.photobucket.com/albums/gg131/fletcher-aac/_MG_0027.jpg
http://i247.photobucket.com/albums/gg131/fletcher-aac/_MG_0026.jpg
http://i247.photobucket.com/albums/gg131/fletcher-aac/_MG_0025.jpg
http://i247.photobucket.com/albums/gg131/fletcher-aac/_MG_0023.jpg
http://i247.photobucket.com/albums/gg131/fletcher-aac/_MG_0022.jpg

The Wounded Warrior 338 LM. YOU can win this rifle, details here:
http://m4carbine.net/showthread.php?t=12808

[karmapolice]

thing is sweet, can't wait to fondle it even though I can't win it lol. Plus all procceds go to a great cause.

[sl4mdaddy]

OK, finally got the time to rattle-can my 700P. I'm pretty satisfied with the results considering it's my first attempt at this.

My thanks to PRGGodfather for the instructions and tolerance of my private messages. ;-)


http://i126.photobucket.com/albums/p116/gdvan01/Painted%20700P/Right_side.jpg


http://i126.photobucket.com/albums/p116/gdvan01/Painted%20700P/Finished_view.jpg

[Dualspringfields]

Savage 10fp .308 B&C stock. Me and a buddy did the paint. IMG]http://i119.photobucket.com/albums/o150/dualspringfields/PB240081-1.jpg[/IMG]
http://i119.photobucket.com/albums/o150/dualspringfields/PB240086-1.jpg
http://i119.photobucket.com/albums/o150/dualspringfields/PB240075-1.jpg
http://i119.photobucket.com/albums/o150/dualspringfields/DSC00138.jpg
http://i119.photobucket.com/albums/o150/dualspringfields/CaseyAvatar.jpg
IOR glass 4.5-14X50
Savage 10fp .223 Nikkon glass 4.5-14
http://i119.photobucket.com/albums/o150/dualspringfields/DSC00603.jpg

Dont shoot this one much.

[Seagrave7]

Update.

Randy from R&D Precision added a new Tactical Knob to my Bolt Action.

[Gunfighter13]

Remington 700, HS Stock, Millett LRS-1.
http://i253.photobucket.com/albums/hh75/Gunfighter13/PICT0022.jpg

[rob_s]

Now see, why ya'll gotta go and post a thread like this and make me remember that bolt-action project I wanted to start....

[Paulinski]

Now see, why ya'll gotta go and post a thread like this and make me remember that bolt-action project I wanted to start....

I feel the same way. My bolt-action project has been long overdue.

[m24shooter]

http://i15.photobucket.com/albums/a391/m24shooter/m24bobro2wm.jpg

[-gary]

Savage 10FP .308 24"
Choate Ultimate Varmint
Super Sniper 20X

http://garydickerson.com/photos/334813823_cumBc-L.jpg

Only group I've saved. I'd say the flyer is at least partly my fault.

http://garydickerson.smugmug.com/photos/334821769_m2XCk-M.jpg

[Trigger_Puller]

Remington 700P .308 Win.
Leupold Mark 4 10x40mm LR/T M3
Leupold Leupold Mark 4 Tactical Mount and Rings

http://i282.photobucket.com/albums/kk246/Trigger_Puller_Photos/MVC-013S.jpg

[Cameron]

http://i886.photobucket.com/albums/ac61/gstuffnow/FNJen02.jpg

http://i886.photobucket.com/albums/ac61/gstuffnow/FNJen03.jpg

[JBRIII]

Fn PBR XP .308 20" in a Manners MCST Stock, CDI Bottom Metal, Mk4 M3, Digi Multi Cam by Parabellum

http://img.photobucket.com/albums/v720/jbreamsiii/digitalmulticamouflage.jpg

http://img.photobucket.com/albums/v720/jbreamsiii/fn004-1.jpg

http://img.photobucket.com/albums/v720/jbreamsiii/fn003.jpg

[KACSR15]

http://i15.photobucket.com/albums/a391/m24shooter/m24bobro2wm.jpg

Man I've been working on my wife for a year to let me spend some of the money I've been making while working down range. I am willing to seperate with $3685.00 for the bare rifle in a heartbeat but she isn't quite so eager. A quick to Scott over at S/C and I would be all set, then wait for delivery.

Edit: After some chat / IM time with the wife last night I think she has warmed to the idea. She even stepped out and asked me what it would take to order one and how long of a wait it would be. I really think she might be coming around and seeing things my way!

[usmcchet9296]

I have finished my Reimington
Its a SPS in .223
I have a Bell and Carlson Light tactical stock on it (Cammo job done by me)
The scope is a Falcon Menace
The Rings are Burris XTR
The Base is a 20MOA from IOR
http://www.oniva.com/upload/204/IMG_2068.JPG

http://www.oniva.com/upload/204/IMG_2073.JPG

http://www.oniva.com/upload/204/IMG_2074.JPG

[USMC03]

http://i278.photobucket.com/albums/kk99/USMC03_photos/Accuracy%20International/DSC02373a.jpg


http://i278.photobucket.com/albums/kk99/USMC03_photos/Accuracy%20International/DSC02375a.jpg


http://coloradoshooting.org/v-web/gallery/albums/usmc03-album-1/DSC01976.sized.jpg


http://coloradoshooting.org/v-web/gallery/albums/usmc03-album-1/DSC01993.sized.jpg




S/F,
Jeff

[RallySoob]

http://i278.photobucket.com/albums/kk99/USMC03_photos/Accuracy%20International/DSC02373a.jpg


http://i278.photobucket.com/albums/kk99/USMC03_photos/Accuracy%20International/DSC02375a.jpg


http://coloradoshooting.org/v-web/gallery/albums/usmc03-album-1/DSC01976.sized.jpg


http://coloradoshooting.org/v-web/gallery/albums/usmc03-album-1/DSC01993.sized.jpg




S/F,
Jeff

can you give us the model/specs on this one please? I'm not into prec bolt guns yet but I'm pretty sure this is what I need... txs

[USMC03]

can you give us the model/specs on this one please? I'm not into prec bolt guns yet but I'm pretty sure this is what I need... txs

Accuracy International Artic Warfare (.308) with a Schmidt & Bender PMII 4-16x50 scope.

The scope mount, cheek piece, bipods, etc. are all Accuracy International. The sling is a Tactical Intervention Specialties quick cuff sling.




S/F,
Jeff

[taliv]

very nice setup

did i miss what caliber it's in?

[theJanitor]

very nice setup

did i miss what caliber it's in?

a post above


Accuracy International Artic Warfare (.308) with a Schmidt & Bender PMII 4-16x50 scope.

[kevN]

1242

This is my first post on the forum, here goes:

Remington 700 LTR .308 with
Badger AICS bottom metal (Stock was inlet by GA Precision who rocks).
Badger Base and M40a3 rings,
GAP oversized "speed knob" bolt,
Leupold MK4 8.5-25x50 LRT M1 w/Illuminated Retical,
Harris Bipod,
B&T accushot monopod (can't say enough good things about these),
Quick Cuff Sling,
Eagle Shooter Stock Pack.

[Voodoochild]

http://img529.imageshack.us/img529/7229/1000394ns1.jpg

[George Mac]

Robar QR2 in .308 I did not like the M14 mag conversion.

http://i22.photobucket.com/albums/b328/georgemac/100_0045.jpg

[George Mac]

Rem 700 PSS in .223 cut to 20" and put in a McMillan HTG. Just for practice and plinking but it is a lot of fun.

http://i22.photobucket.com/albums/b328/georgemac/IMG_0361.jpg

[George Mac]

Tac Ops .308 in a McMillan A1-3

http://i22.photobucket.com/albums/b328/georgemac/IMG_0314.jpg

[George Mac]

A1-3 next to the HTG for comparison. The Tac Ops was originally in an A5 stock. Since putting it into the A1-3 I have moved the scope forward about 1 inch.

http://i22.photobucket.com/albums/b328/georgemac/IMG_1151.jpg

http://i22.photobucket.com/albums/b328/georgemac/104_0440.jpg

[usmcchet9296]

Took my Remington SPS to the range today to see how well it could shoot and these are the results.....

http://www.oniva.com/upload/204/IMG_2150_copy.jpg

http://www.oniva.com/upload/204/IMG_2151_copy.jpg

Its a great tack driver for sure and I really like how my cammo job came out.

http://www.oniva.com/upload/204/rangeday_sept08_6.JPG

http://www.oniva.com/upload/204/rangeday_sept08_10.JPG

Im not sure how my groups translate to a MOA but all are smaller than a dime and 2 are smaller than FDR's grape

[grinch]

I finished a few rem 700s recently for a few buddies.


I just got get my potography down I dont do justice to anything I take pics of.

http://i42.photobucket.com/albums/e312/grinch5326/IMG_0944.jpg

http://i42.photobucket.com/albums/e312/grinch5326/IMG_0927.jpg

http://i42.photobucket.com/albums/e312/grinch5326/IMG_0942.jpg

http://i42.photobucket.com/albums/e312/grinch5326/IMG_0853.jpg

http://i42.photobucket.com/albums/e312/grinch5326/IMG_0960.jpg

http://i42.photobucket.com/albums/e312/grinch5326/IMG_0673.jpg

http://i42.photobucket.com/albums/e312/grinch5326/IMG_0674.jpg

http://i42.photobucket.com/albums/e312/grinch5326/IMG_0671.jpg

http://i42.photobucket.com/albums/e312/grinch5326/IMG_0678.jpg

http://i42.photobucket.com/albums/e312/grinch5326/IMG_0921.jpg

[Scattergun]

AMAC .50BMG Rifle

http://img.photobucket.com/albums/v682/allproblemsolved/AMAC/AMACright800x600.jpg

200yd group. I'm still working on it. I am sure I can tighten it up more.

http://img.photobucket.com/albums/v682/allproblemsolved/AMAC/group.jpg

[ZDL]

AMAC .50BMG Rifle

http://img.photobucket.com/albums/v682/allproblemsolved/AMAC/AMACright800x600.jpg

200yd group. I'm still working on it. I am sure I can tighten it up more.

http://img.photobucket.com/albums/v682/allproblemsolved/AMAC/group.jpg

Very nice. Single shot or internal magazine?

[Scattergun]

it is shell holder type single shot

[ZDL]

it is shell holder type single shot

Gotcha. Got a picture with bolt open?

[Scattergun]

no, but I'll make a couple

[ZZBLAZEZZ]

Heres mine. McMillan built rifle. Sako action

http://i271.photobucket.com/albums/jj159/zzblazezz_2007/IMG_1886.jpg

http://i271.photobucket.com/albums/jj159/zzblazezz_2007/IMG_1876.jpg

http://i271.photobucket.com/albums/jj159/zzblazezz_2007/IMG_1877.jpg

http://i271.photobucket.com/albums/jj159/zzblazezz_2007/IMG_1894.jpg

[TacDoc]

Everything I need to have a good shooting time in just 1 bag and 1 plastic box.

http://i37.tinypic.com/2eod01i.jpg
http://i33.tinypic.com/214z98p.jpg
http://i36.tinypic.com/rh8rc7.jpg
http://i36.tinypic.com/5xre52.jpg
http://i34.tinypic.com/2qx93ev.jpg
http://i35.tinypic.com/359d1c3.jpg
http://i37.tinypic.com/2nga2qu.jpg
http://i38.tinypic.com/1z37bm8.jpg
http://i34.tinypic.com/2guvyvs.jpg
http://i38.tinypic.com/34dikg1.jpg
http://i33.tinypic.com/2mqrlv6.jpg
http://i35.tinypic.com/2ignokh.jpg

Range Report

101 rounds between Federal Gold Medal 175gr and some handloads.

The next 2 pics are 5 round groups at 100yds while doing BZO with Federal GM. Disregard the lower 2 shots in the first pic.

http://i35.tinypic.com/260yl4w.jpg
http://i35.tinypic.com/2ptaqlg.jpg

The rifle is trully amazing. I managed to keep 3-4" groups at 300yds and 6-8" groups at 600yds. Not bad for a first timer.

http://i37.tinypic.com/28u7bds.jpg
http://i36.tinypic.com/2w7h0f7.jpg
http://i34.tinypic.com/24oc09i.jpg
http://i38.tinypic.com/ickzz5.jpg
http://i37.tinypic.com/28veurl.jpg

[TUNNEL RAT 33]

great pics !! whats the yardage of that range ?

[TacDoc]

great pics !! whats the yardage of that range ?

Thanks. The "legal" maximum yardage using the paper targets at the pit is 600 yds.

There are berms at 200, 300, 400, 500 and 600 yds from the pit, but also there are steel targets placed in the mountain at 800, 1000 and 1130 yds from the 600 yds berm. Also we can bring our own metals and locate them in the mountain as needed...
http://i36.tinypic.com/bf0u3p.jpg

Notice one of the 800 yds targets in the following pic.
http://i34.tinypic.com/2dsfh35.jpg

[Seagrave7]

http://i34.tinypic.com/2dsfh35.jpg

Nice range.

[Robb Jensen]

I stripped off the Krylon from my scope and stock (it was turning yellowish) and sprayed to stock, bipod, mags and scope with Duracoat 'Tactical Dark Earth', I just got some of the flex additive so that I can spray the bipod feet and scope lenses covers. I also replaced my scope mount and rings with physically lower Badger rings and a Badger 20MOA base (still need to spray these too). The nomex suppressor cover is from TAB Gear from www.riflesonly.com

http://img.photobucket.com/albums/v408/gotm4/gunpics/700004.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/700001.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/700006.jpg

[KACSR15]

Probably most favorite rifle and the one of all I wish I had never sold. Not exactly"Tactical" but it was on it's way, my old Remington 40X.

My old 40X. :(
http://i356.photobucket.com/albums/oo7/moyertr/40x-xc1.jpg

After a shot on an unsuspecting woodchuck.
http://i356.photobucket.com/albums/oo7/moyertr/40xc-ks2.jpg

[jayjaytuner]

Surgeon Scalpel 6.5x47 Lapua

http://i114.photobucket.com/albums/n275/jayjaytuner/001.jpg
http://i114.photobucket.com/albums/n275/jayjaytuner/005.jpg

[SloaneRanger]

http://i278.photobucket.com/albums/kk99/USMC03_photos/Accuracy%20International/DSC02373a.jpg

S/F,
Jeff


Truly a thing of beauty, my good man!!

.338 Lapua??:)

[azidpa]

http://lh5.ggpht.com/_7rimYV6xX0I/SdV5wEEL0PI/AAAAAAAABFE/VH5bXxyj3RY/s720/IMG_0099.JPG


http://lh3.ggpht.com/_7rimYV6xX0I/SdV5p_lyD2I/AAAAAAAABE8/j-wd1cTQPko/s720/IMG_0103.JPG

.308 REM 700 w/ AWC thundertrap supprsr.
IOR 2.5-10x42 with MP8 reticle
Replaced the 20moa base and mounted a lower set of standard rings, scope has plenty of elevation on it's own.

[USMC03]

Truly a thing of beauty, my good man!!

.338 Lapua??:)


.308 .......... I like to shoot a lot, not just a little ($$$) ;)




S/F,
Jeff

[was21]

Here's the one that I've been running lately!
http://i301.photobucket.com/albums/nn69/gatoraz/SUNP0006.jpg

Wes in AZ

[canucklehead]

http://i37.photobucket.com/albums/e95/canuckleheaddave/IMG_8901.jpg
http://i37.photobucket.com/albums/e95/canuckleheaddave/IMG_8903.jpg

http://i37.photobucket.com/albums/e95/canuckleheaddave/IMG_8908.jpg

[dcsansiraq]

http://i37.photobucket.com/albums/e95/canuckleheaddave/IMG_8901.jpg
http://i37.photobucket.com/albums/e95/canuckleheaddave/IMG_8903.jpg

http://i37.photobucket.com/albums/e95/canuckleheaddave/IMG_8908.jpg

Nice Tikka! Mine was like that once.. now it is like this:

http://i386.photobucket.com/albums/oo302/dcsans/HPIM0801-1.jpg

Tkka T3 .308 w/ Burris XTR 3-12X50

[javentre]

a Surgeon in 6XC.

http://www.ventrefamily.com-a.googlepages.com/6xc.jpg

[rparker762]

My first humble build. Still in the fine tuning stages. Yugo Mauser action, 26" E.R. Shaw 308 Bbl. Haven't fully broken it in yet but things are looking promising.

[Dave L.]

I'll post more pictures once I get my NF 5.5-22X50 ZS MLR mounted:cool:
http://i123.photobucket.com/albums/o309/laninga66/DSC01263.jpg

[jakeb]

I'll post more pictures once I get my NF 5.5-22X50 ZS MLR mounted:cool:

Nice...bring a howitzer to a bolt rifle thread. :D

[Dave L.]

Nice...bring a howitzer to a bolt rifle thread. :D

I thought we were measuring ;)

[ZDL]

I thought we were measuring ;)

Compensating for something? :p

Nice rifle. :cool:

[Dave L.]

Compensating for something? :p

Nice rifle. :cool:

Thanks,
A big truck was out of the question:D

[diving dave]

My Robar SR90
http://farm4.static.flickr.com/3065/3100235817_13c75e07d8.jpg

[USMC03]

http://i278.photobucket.com/albums/kk99/USMC03_photos/Rem%20700%20LTR/DSC02378a.jpg


S/F,
Jeff

[JSandi]

http://i278.photobucket.com/albums/kk99/USMC03_photos/Rem%20700%20LTR/DSC02378a.jpg


S/F,
Jeff



Which one is that the LTR or SPS, .223 or .308?

[C45P312]

http://img.photobucket.com/albums/v329/C45P312/Firearms/DSC03352.jpg

http://img.photobucket.com/albums/v329/C45P312/Firearms/DSC03350.jpg

http://img.photobucket.com/albums/v329/C45P312/Firearms/DSC03343.jpg

http://img.photobucket.com/albums/v329/C45P312/Firearms/DSC03351.jpg

[USMC03]

Which one is that the LTR or SPS, .223 or .308?

Remington 700 LTR .308




S/F,
Jeff

[Goober]

My work in progress...

Remington 700 - 300 Winmag

[TUNNEL RAT 33]

beautiful stick ! what kind of bipod is that ? the feet are very aggressive looking .

[Goober]

Thanks man! It has been my project for the past year. As for the bipod it is a Harris HBRM-S with a pod-lock. I replaced the feet with pod claws from Phoenix Tactical because my Harris' feet kept sinking in the sand at my range. They came in a dark earth color but I refinished them myself in black. They are great! Just gotta be careful cuz they will dig into anything... including cases... bedsheets... yourself :) lol I just keep a small canvas bag on them until I am ready to deploy and problem solved! Well thanks for the kind words, let me know if you have any more questions!

-Goober

P.s. Here is there website. The guys are really friendly and they ship quickly too.

http://www.phoenixtactical.com/

[THT]

Just my simple 5R with a 16X Super Sniper

http://www.tophattheater.net/pics/guns/5r.jpg

[Dirknar]

This is my GAP/Surgeon .260 that I compete with.
McM A3
26" Oby barrel
Badger detachable bottom metal
Seeking base/rings
Leupold 6.5-20 x 50 TMR
Harris 6-9 swivel w/ podlock & leg notch's.
http://www.hunt101.com/data/500/35185DSC01136.JPG

Below is what the rifle is capable of. Just to bad I can't do this everyday.
http://www.hunt101.com/data/500/35185DSC00746.JPG

Later,
Stu

Hey Stu, Nice rifle..

heres. mine..

Gap tuned .308/rem700 action/rifle basix trigger/bartlein barrel 24" from the lug, M40 contour/williams bm/McM A-5/Leupy 4.5-14x50 TMR/USO base/Burris XTR rings.
http://i24.photobucket.com/albums/c25/Dirknar77/april202.jpg

[TUNNEL RAT 33]

great looking rifle ! whats the color ratio of your mcmillan stock ?

[Dirknar]

great looking rifle ! whats the color ratio of your mcmillan stock ?

75% OD, 25% black marble

[TUNNEL RAT 33]

nice - i went 70% black 30% olive on my A5 but i still have a good 2 months more to go on the wait .

[Dirknar]

nice - i went 70% black 30% olive on my A5 but i still have a good 2 months more to go on the wait .

Thats going to be a sweet combo.. whats going in it?

[TUNNEL RAT 33]

i've got a savage 10fpxp that is currently in a hs precision stock . i was going to go with the solid black , but i really like the marbled look . hopefully the mix of the black and olive will be good and ugly . lol

[Mute]

My personal boomstick:

http://farm1.static.flickr.com/102/286239812_83391c4055_b.jpg

http://farm1.static.flickr.com/112/286239752_9b3b392c65_b.jpg

http://farm1.static.flickr.com/116/287388372_dc6f841529_b.jpg

[M4A1CQBR]

^^^^Very Nice!

[Aggunner]

new pic from yesterday evening's trip

http://aggunner.com/pictures/range/5-4-09/gap.jpg

[Slater]

I dunno - does this qualify as a tactical bolt gun ? :D

http://i571.photobucket.com/albums/ss158/5757_photos/HPIM0877.jpg

[usmcchet9296]

My Remmy in .223
http://farm4.static.flickr.com/3321/3499026860_2f39811733_b.jpg

My Ruger in 22
http://farm4.static.flickr.com/3371/3482054248_2dae5f1c40_o.jpg

Yeah I know Im a freak

[Seagrave7]

new pic from yesterday evening's trip

http://aggunner.com/pictures/range/5-4-09/gap.jpg


Very nice setup. What kind of stock is that?

[Wally]

I may be wrong but I believe its a Mcmillan A5 in GAP camo...Wally

[Fringe]

new pic from yesterday evening's trip

http://aggunner.com/pictures/range/5-4-09/gap.jpg

Sweet gun. Looks like just what I am having GAP build me. Is this a Crusader? What can are you running? 18"?

[mattpittinger]

New School vs. Old School

http://i658.photobucket.com/albums/uu307/mattpittinger/100_1631-1.jpg
http://i658.photobucket.com/albums/uu307/mattpittinger/100_1634.jpg

[azidpa]

started life as a 700 SPS varmint in 223.

Barrel reduced to 20", free floated and crowned. Action bedded.
Stock is an old McMillan HTG.
scope: Weaver 2.5-10x50

http://lh3.ggpht.com/_7rimYV6xX0I/ShjN929jQ5I/AAAAAAAABN4/p7cQbBOTQvU/s576/IMG_0122.JPG


http://lh4.ggpht.com/_7rimYV6xX0I/ShjOEDq3GxI/AAAAAAAABOE/x9h-cG7YLF0/s576/IMG_0125.JPG

[Detective_D]

Well, we finally finished my wife's .308...

Remington 700 SPS Tactical
Leupold Mark IV 4x14x50 mildot LR/T
Ken Ferrel G-Force Base
Burris Xtreme Tactical rings

No range report yet. We are going next weekend to her parents property to sight it in and put a few rounds down range.

http://i281.photobucket.com/albums/kk231/Detective_D/IMG_4338.jpg

http://i281.photobucket.com/albums/kk231/Detective_D/IMG_4340.jpg

http://i281.photobucket.com/albums/kk231/Detective_D/IMG_4341.jpg

~D

[kaiservontexas]

It is not new, and I lack the Unertl scope GySgt Hatchock had on his rifle, but this is my precision rifle. Grandpa taught me how to shoot on it. The only thing I have ever added to the rifle is the ammo carrier on the stock.

Winchester Model 70 Pre-64 .30-06sprg:
http://i725.photobucket.com/albums/ww256/crusaderwyn/misc%20firearms/LOGMod70.jpg

[Aggunner]

sorry for taking so long to respond,

the gun is a crusader that was cut back to 20" and profiled for the OPS 3rd

[TUNNEL RAT 33]

my A5 stock has arrived and after some minor gunsmithing its all together. will post some pics when i can get it to the range .

[mildot]

Well she's on her way home, just waiting or for the Leupold Mark 4 3.5 X 10
http://i9.photobucket.com/albums/a76/mildot326/IMG_1381.jpg
http://i9.photobucket.com/albums/a76/mildot326/IMG_1382.jpg

[mildot]

http://i123.photobucket.com/albums/o309/laninga66/GAPrifle1.jpg
http://i123.photobucket.com/albums/o309/laninga66/GAPrifle006.jpg
31.5 inches folded, removing the Flash hider makes it about 30.5 inches folded.
http://i123.photobucket.com/albums/o309/laninga66/GAPrifle003.jpg
http://i123.photobucket.com/albums/o309/laninga66/GAPrifle011.jpg
Just over 1/2 inches at 100 yards- 5,6,7th shots...so much for break in...

GAP built this for me- it was worth the 5K

*These pics are from when it was new...it's been dragged many times since then.

Buds can you tell me the barrel contour and the length?
BTW Very Nice piece of kit!!!
Cheers

[TUNNEL RAT 33]

2549its been raining here for a couple of days . its not a great pic = i'll take some more when i can get to the range.

[TUNNEL RAT 33]

finally a break in the rain . will be off to the range in a hour so some new pics will be posted soon .

[TUNNEL RAT 33]

okay here are some range pics .2640

2641

2642

2643

[dkc4u]

http://i104.photobucket.com/albums/m167/dkc4u/DSC_0006-1.jpg

Remington Model 700 XCR Tactical Long Range is the best shooting rifle that I have ever shot.

[Sone]

http://i430.photobucket.com/albums/qq25/Infidel_2008/IMG_0255.jpg

Remington SPS Tactical with B&C stock, Eagle stock pack, EGW 20MOA base with Burris Xtreme Tactical Rings, CDI DBM and Brownells Bolt handle

[wilshire1412]

Something I had been wanting for a long time, GA Precision M40A1...
http://i66.photobucket.com/albums/h253/jetsound/DSC_4883.jpg
http://i66.photobucket.com/albums/h253/jetsound/DSC_4885.jpg

[SSGN_Doc]

http://i32.tinypic.com/w06ycj.jpg

http://i26.tinypic.com/2jbl2tc.jpg

My Sako. In .30-06. It's my "tactical/hunter".

Redfield Accutrac scope.

[matrxx]

Dave L.
How do you like the AIs 2.0 stock?

[matrxx]

azidpa,
It 's a nice smear HTG you have.I have one in black.

[matrxx]

SSGN_Doc,

Nice painting job.
How did you do?

[matrxx]

One of my stick

http://gi154.photobucket.com/groups/s269/J4Q09QHAP2/R700.jpg

[matrxx]

USMC03,
What kind of rings do you have on your glass?is that D.Ross 's?

[USMC03]

Badger Ord. rigs and bases.



S/F,
Jeff

[militarymoron]

i've had this for a while, but summed up the guts to paint it only a few months ago.

http://img.photobucket.com/albums/v483/militarymoron/viper62.jpg

http://img.photobucket.com/albums/v483/militarymoron/viper63.jpg

[matrxx]

militarymoron,

it's worth to do a nice painting job on 1.0 version .

[smith934]

http://i250.photobucket.com/albums/gg267/smith934/GAP_Rock_SWS.jpg

GAP Custom .308 - Trued Rem SA, Rock 5R AMU/M24 Conture, McMillan HTG A1 in Italian Desert, VXIII 3.5 - 10 x 40 M3 LR, Badger rings, base, bottom metal & bolt knob

http://i250.photobucket.com/albums/gg267/smith934/GAP_Rock_SWS2.jpg

http://i250.photobucket.com/albums/gg267/smith934/GAP-MikeRock10ShotGroup2-21-04.jpg

10 round 100 yd group .263 C to C (during load development) Lapua brass/175 SMK/Fed 210M primer/44.5 gr. Varget

[Edge]

Here's me shooting my GAP:

GAP custom .308
20" Rock barrel
A4 McMillan Stock
YHM Stainless Phantom Suppressor
5.5-22x50 Nightforce NP-R1
Nightforce rings
Badger base
Badger M4 bottom (will upgrade to a DBM soon, probably Surgeon)
Shoots like a GAP!! :D

http://www.parmarng.org/Pix/LRTR-2009-01-17/slides/DSC02731.JPG

[SSGN_Doc]

SSGN_Doc,

Nice painting job.
How did you do?

Disassembled the rifle.

Laid down a base coat of OD then after it dried I tore irregular shaped pieces of blue painters tape and applied them to the stock where I wanted the green to stay. I overlapped some strips to make larger blobs.

Then painted everything brown. Waited for that to dry and applied more irregular shapes of blue tape where I wanted brown and overlapped some of the existing tape where I wanted brown and green to stay.

Then sprayed on the tan. Waited for that to dry. Then removed all the tape. The contrast of colors seemed a bit sharp, so I did a light mist of all three colors to help tone them down a bit. If an area seemed too dark it got a touch more tan. If it seemed too light it got more of the brown or green.

After that dried I put on some Polyurethane Satin Clear to provide a bit more protection.

After a day of drying in the hot garage, I reassembled the rifle.

[SavageSniper22]

http://us.mg2.mail.yahoo.com/ya/download?fid=Sent&mid=1_67494_AIkMDUwAAPFDSpG8uwVUnnByeWM&pid=2&tnef=&YY=1251065019843&newid=1&clean=0&inline=1

http://us.mg2.mail.yahoo.com/ya/download?fid=Sent&mid=1_67192_AMUMDUwAAQ1kSpCP2gxikHef5Fw&pid=2&tnef=&YY=1251065070765&newid=1&clean=0&inline=1

http://us.mg2.mail.yahoo.com/ya/download?fid=Sent&mid=1_67806_AKcMDUwAAAY7SpG97gN6BiefCpw&pid=2&tnef=&YY=1251065330203&newid=1&clean=0&inline=1

[ess45]

http://i235.photobucket.com/albums/ee107/ess45/ESS132X.jpg

[stony275]

http://i250.photobucket.com/albums/gg267/smith934/GAP_Rock_SWS.jpg

GAP Custom .308 - Trued Rem SA, Rock 5R AMU/M24 Conture, McMillan HTG A1 in Italian Desert, VXIII 3.5 - 10 x 40 M3 LR, Badger rings, base, bottom metal & bolt knob

http://i250.photobucket.com/albums/gg267/smith934/GAP_Rock_SWS2.jpg

http://i250.photobucket.com/albums/gg267/smith934/GAP-MikeRock10ShotGroup2-21-04.jpg

10 round 100 yd group .263 C to C (during load development) Lapua brass/175 SMK/Fed 210M primer/44.5 gr. Varget

What is the rationale for having a separate location for the bolt? Is it to keep the bolt handle from "bottoming out" against the foam during transit?

[Dave L.]

What is the rationale for having a separate location for the bolt? Is it to keep the bolt handle from "bottoming out" against the foam during transit?

I wouldn't be worried about it in a Pelican/Storm case but
GAP takes the bolts out and wraps them in bubble wrap prior to shipping (...at least in my experience).

[smith934]

What is the rationale for having a separate location for the bolt? Is it to keep the bolt handle from "bottoming out" against the foam during transit?

That was mine, yes. Better safe than sorry and there was room for it. Remmy bolt handles have been known to break off on ocassion (they're soldered on) and this one has not been mod'ed with torx screws/bolts.

[smith934]

I wouldn't be worried about it in a Pelican/Storm case but
GAP takes the bolts out and wraps them in bubble wrap prior to shipping (...at least in my experience).

I had a GAP (Sniper Country raffle rifle) sent to me, several years ago, where UPS managed to bend a mounted Badger Ring.
The damn things are bullet proof but UPS could f**k up an anvil.:mad:

[KJDrake]

New 300RCM built by Terry Cross at KMW.

Surgeon WSM action
Kreiger bbl at 22"
McM A5 stock
Nightforce F1 mil/mil adj
Harris bipod with KMW Pod-Loc
Surefire .338 sup
Badger DBM

http://img.photobucket.com/albums/v188/blaster4/surg2.jpg

[Robb Jensen]

My Remington 700.

I started life as a 24" 700 P DM. It was gone through by PWS at Quantico.
Later I had John Noveske shorten the barrel to 20" and thread to 5/8"x24tpi.
Recently I installed a AICS 2.0 stock on it and had Drew at WAR rifles install a Badger bolt handle.

Specs:
Badger 20MOA base, Badger rings, Leupold 3.5-10x w/M3 turrets with a Charels Drissel 'cat-tail' and a Harris bipod, can is an AAC Cyclone.
Action, barrel, can, scope base, scope rings and bolt are coated with Norrels desert tan.
Stock, scope and bipod are Duracoated in Magpul FDE.

http://img.photobucket.com/albums/v408/gotm4/gunpics/700.jpg

[Voodoochild]

Very nice Robb, Very nice.

[MikeCLeonard]

New 300RCM built by Terry Cross at KMW.

Surgeon WSM action
Kreiger bbl at 22"
McM A5 stock
Nightforce F1 mil/mil adj
Harris bipod with KMW Pod-Loc
Surefire .338 sup
Badger DBM

http://img.photobucket.com/albums/v188/blaster4/surg2.jpg

Mind saying what the color's and mix ratio is on that A5 stock? Very cool looking!

[KJDrake]

thanks. I just checked the invoice....this stock is about 3 years old now and it says 33% for all three colors...OD, tan, and black. I would say it looks more like 20% tan, 20% black, and 60% OD

looks like a lot of OD. you cold just send them a pic and say you want it to look like this.

[Seagrave7]

Update

Rem 700 SPS Tactical
MCM A-5
Leupold Mark 4 4.5-14x50 Illuminated TMR
Harris Bi-Pod

http://i301.photobucket.com/albums/nn60/Seagrave77/Private/IMG_4775a.jpg

[longrange18]

Update

Rem 700 SPS Tactical
MCM A-5
Leupold Mark 4 4.5-14x50 Illuminated TMR
Harris Bi-Pod

http://i301.photobucket.com/albums/nn60/Seagrave77/IMG_4775a.jpg

Simple and beautiful! I like it!:D

[Mo_Zam_Beek]

http://img.photobucket.com/albums/v402/conga68/9_12_09004.jpg

.300 WM

[Killjoy]

http://i149.photobucket.com/albums/s49/Killjoy07/P9120964.jpg

http://i149.photobucket.com/albums/s49/Killjoy07/P9120963.jpg

http://i149.photobucket.com/albums/s49/Killjoy07/P9120961.jpg

Remington 700 SPS Tactical
Bell & Carlson A5 Stock
Badger Ordinance Bolt Handle
Threaded barrel with Vortex flash suppressor
Harris Bipod
Leupold Mark 4 3.5-10 with Mildot reticle

http://i149.photobucket.com/albums/s49/Killjoy07/P5010763.jpg

http://i149.photobucket.com/albums/s49/Killjoy07/P5010765.jpg

Here's a couple of shots of me wringing my rifle out at Blackwater's LE/Military Sniper course earlier this year.

[sparrow]

Forgive the lousy pictures guys. My M40a1 Spec. built clone showed up earlier this week. This was a faithful reproduction using the same type receiver that is within the same serial number range (6 digit). A USMC return stock, Mike Rock M40 barrel and a TBA mount. Every detail is correct as are all the markings and machining required. Just waiting on my MST-100 scope. I don't have the MRT sling but a nice Les TAM USMC marked sling is in place right now. Totally obsolete by today's standards but I plan on making this my course and competition rig once the scope arrives. The rifle was built by Casey Brouwer at Tactical Ordnance in Ontario, Casey is a Swat guy and an amazing machinist. I didn't have the heart to remove the young Marine's art work from the stock so it stays.

http://i28.photobucket.com/albums/c229/sgaaliyah/USMCM40a1Mi-Spec.jpg
http://i28.photobucket.com/albums/c229/sgaaliyah/USMCM40a1Mi-Spec003.jpg
http://i28.photobucket.com/albums/c229/sgaaliyah/USMCM40a1Mi-Spec004.jpg
http://i28.photobucket.com/albums/c229/sgaaliyah/USMCM40a1Mi-Spec006.jpg

[DBake]

http://i149.photobucket.com/albums/s49/Killjoy07/P5010765.jpg





What rifle is that the the left? What stock is that?

[Gutshot John]

My wife would call this "putting lipstick on a pig".

SPS with Premier Reticles Scope from Liberty Optics. Seekins Rings and Base. Harris Bipod, Tactical Intervention slip-cuff and a BALS-K cheek-pad.

At 34mm the scope is a beast but had everything I wanted and so I bought a scope with the understanding I'd never need to buy another scope again for a precision rifle.

After I get a couple of thousand rounds down-range I'll update the stock and barrel as well as FH or threaded barrel. Already I can tell the cheek weld needs to be a little higher and the LOP needs to be a little shorter and I prefer a pistol grip.

http://i286.photobucket.com/albums/ll99/GutshotJohn/CIMG0442.jpg
http://i286.photobucket.com/albums/ll99/GutshotJohn/CIMG0445.jpg
http://i286.photobucket.com/albums/ll99/GutshotJohn/CIMG0443.jpg
http://i286.photobucket.com/albums/ll99/GutshotJohn/CIMG0440.jpg

[ccoker]

LTR 308, Jewell trigger, Kahles CL 3-10x50 with multizero.

http://lh4.ggpht.com/_W89W80IRUYk/SuG1tV-VzvI/AAAAAAAAAl4/tZdJutUScFU/s1024/coker_ltr_right.jpg

http://lh3.ggpht.com/_W89W80IRUYk/SuG1tbMEyaI/AAAAAAAAAl8/1uUj8XJCzkY/s1024/coker_ltr_left.jpg

[frbowers]

Recently got this one back and finished up. All work my Mark Penrod.

Model 70 action trued and squared, safety timed, 2.5 lb trigger
Krieger 1-10" 24" Remington Varmint contour 30-06
Williams one-piece bottom metal, modified Model 700 follower spring
McMillan GPH stock, pillar bedding, Wichita 1.5" sling swivels
Badger rings and base
Leupold Mark 4 4.5-14X 40mm with Mil-dot
Birdsong's Black T on metal

Haven't been on the range with it yet, but I am very happy with Mark's craftsmanship and his professionalism in handling the project.

http://img8.imageshack.us/img8/5515/win1a.jpg (http://img8.imageshack.us/i/win1a.jpg/)

http://img5.imageshack.us/img5/3578/win5c.jpg (http://img5.imageshack.us/i/win5c.jpg/)

http://img5.imageshack.us/img5/4092/win6.jpg (http://img5.imageshack.us/i/win6.jpg/)

http://img200.imageshack.us/img200/5548/win4.jpg (http://img200.imageshack.us/i/win4.jpg/)

http://img10.imageshack.us/img10/8726/win3a.jpg (http://img10.imageshack.us/i/win3a.jpg/)

http://img5.imageshack.us/img5/3315/win2pr.jpg (http://img5.imageshack.us/i/win2pr.jpg/)

http://img3.imageshack.us/img3/3102/1008991.jpg (http://img3.imageshack.us/i/1008991.jpg/)

http://img3.imageshack.us/img3/5291/1008985.jpg (http://img3.imageshack.us/i/1008985.jpg/)

Forrest

[ccoker]

Did a little more work on my LTR

http://img193.imageshack.us/img193/7937/ltrcamo102429.jpg

5 rounds, 100 yards
http://lh3.ggpht.com/_W89W80IRUYk/St3_op0f8dI/AAAAAAAAAlw/DXoP_m_X72w/s576/dime.JPG

[Kingrabbit]

my humble contribution... still working her in.. 5 round shot group at 200yds
http://i425.photobucket.com/albums/pp338/kingrabbit/IMG_3115.jpg
http://i425.photobucket.com/albums/pp338/kingrabbit/IMG_3120.jpg
http://i425.photobucket.com/albums/pp338/kingrabbit/DSC01406.jpg
http://i425.photobucket.com/albums/pp338/kingrabbit/DSC01405.jpg

[Sone]

what stock is that?

[Kingrabbit]

all my paper works says is..M40A5 thumbwheel adjustable cheekpiece

[Sone]

does list a manufacture or just that product number

[Kingrabbit]

McMillan M40 stock,, sorry having some brain farts tonight..

[GackMan]

Rawr!

http://img185.imageshack.us/img185/7686/rem700sm7lc.jpg

Breath damn it!

http://img185.imageshack.us/img185/9057/fed168gr5pl.jpg

[Gutshot John]

http://img185.imageshack.us/img185/9057/fed168gr5pl.jpg

Damn nice, what was your range?

[tylerw02]

Thought I'd post a pic of my favorite rifle:

Specs:


Rem 700
Rem VS bbl chopped down, recrown
McMillian HTG stock in woodland camo, textured
Williams bottom metal
Tactical Operations bolt conversion
NF 40 MOA base
NF 1.0 steel rings
Nightforce NXS 3.5-15-50 NP-R2
Eagle Industries stock pack
Tuned factory trigger
Harris BR 6-9" bipod
All metal coated in black matte Gun Kote


http://www.monkeyview.net/id/4025/default/DSCI0655.jpg

[tylerw02]

Thought I'd post a pic of my favorite rifle:

Specs:


Rem 700
Rem VS bbl chopped down, recrown
McMillian HTG stock in woodland camo, textured
Williams bottom metal
Tactical Operations bolt conversion
NF 40 MOA base
NF 1.0 steel rings
Nightforce NXS 3.5-15-50 NP-R2
Eagle Industries stock pack
Tuned factory trigger
Harris BR 6-9" bipod
All metal coated in black matte Gun Kote


http://www.monkeyview.net/id/4025/default/DSCI0655.jpg
http://www.monkeyview.net//id/4025/default/DSCI064501.jpg

[GackMan]

Damn nice, what was your range?

Laser said 139 yards.

It was down the hill and up the hill so that was about the first spot that was on the same plane as where I was shooting from.

[masternave]

I'm new to this game, this is my first bolt action. Picked it up for a steal at a gun show (without scope or bipod) a month or so ago. I love it now.

http://imgur.com/CPkD1.jpg (http://imgur.com/MDoMF.jpg)

[Robb Jensen]

My wifes Rem 700 VSS .223Rem with Gemtech M496D wG5 mount on a PWS FSC556 G5 comp. Scope is a Leupold 4.5-14x Tactical in Leupold rings and 1pc mount.
The barrel was shortened and threaded by Drew at WAR rifles. He also trued the action and steel bedded the receiver.

http://img.photobucket.com/albums/v408/gotm4/gunpics/3gunriflepics036.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/3gunriflepics038.jpg

[Looey]

http://i149.photobucket.com/albums/s49/Killjoy07/P9120964.jpg

http://i149.photobucket.com/albums/s49/Killjoy07/P9120963.jpg

http://i149.photobucket.com/albums/s49/Killjoy07/P9120961.jpg

Remington 700 SPS Tactical
Bell & Carlson A5 Stock
Badger Ordinance Bolt Handle
Threaded barrel with Vortex flash suppressor
Harris Bipod
Leupold Mark 4 3.5-10 with Mildot reticle

http://i149.photobucket.com/albums/s49/Killjoy07/P5010763.jpg

http://i149.photobucket.com/albums/s49/Killjoy07/P5010765.jpg

Here's a couple of shots of me wringing my rifle out at Blackwater's LE/Military Sniper course earlier this year.

I knew i recognize the ranges, hope you had fun.

[browningboy84]

Here is my first painted tackdriver.

It is a Savage Model 12BVSS. I have a Leupold Vari-XIII 4.5-14x50 with a one piece Warne rail base, and Leupold rings. The paint job was done by Joefriday here on the hide, and kudos to him on the paint job. I will be on vacation in two weeks, and I will be sighting it in then. I cant wait to try her out.

http://i673.photobucket.com/albums/vv95/browningboy84/000_0011.jpg

http://i673.photobucket.com/albums/vv95/browningboy84/000_0012.jpg

http://i673.photobucket.com/albums/vv95/browningboy84/000_0013.jpg

http://i673.photobucket.com/albums/vv95/browningboy84/000_0014.jpg

[Shadow6]

Training with Polish SF in Ghazni.

Polish Tor (.50 cal) and Sako w/ suppressor (.308)

Sako:
http://i22.photobucket.com/albums/b341/pmguru2005/PA200514.jpg

http://i22.photobucket.com/albums/b341/pmguru2005/PA200522.jpg

http://i22.photobucket.com/albums/b341/pmguru2005/PA200520.jpg

http://i22.photobucket.com/albums/b341/pmguru2005/PA200527.jpg

Tor:
http://i22.photobucket.com/albums/b341/pmguru2005/PA200538.jpg

http://i22.photobucket.com/albums/b341/pmguru2005/PA200534.jpg

http://i22.photobucket.com/albums/b341/pmguru2005/PA200509.jpg

http://i22.photobucket.com/albums/b341/pmguru2005/th_PA200529.jpg (http://s22.photobucket.com/albums/b341/pmguru2005/?action=view&current=PA200529.flv)

[Cameron]

FNH PBR XP .308Win
Leupold 4.5-14x50mm MK4 LR/T TMR reticle

http://i886.photobucket.com/albums/ac61/gstuffnow/FNPBRXP.jpg

[bobby]

Rem Model 700VSF
HS Precision stock, my paint
20 deg Badger base
Badger rings
Eagle shooters Stock Pack
Leupold MKIV 3x9

http://i236.photobucket.com/albums/ff73/edslounge/M700a.jpg

http://i236.photobucket.com/albums/ff73/edslounge/M700b.jpg

http://i236.photobucket.com/albums/ff73/edslounge/5-16-09100yds.jpg

[mattjmcd]

Training with Polish SF in Ghazni.

Polish Tor (.50 cal) and Sako w/ suppressor (.308)

Sako:
http://i22.photobucket.com/albums/b341/pmguru2005/PA200514.jpg

http://i22.photobucket.com/albums/b341/pmguru2005/PA200522.jpg

http://i22.photobucket.com/albums/b341/pmguru2005/PA200520.jpg

http://i22.photobucket.com/albums/b341/pmguru2005/PA200527.jpg

Tor:
http://i22.photobucket.com/albums/b341/pmguru2005/PA200538.jpg

http://i22.photobucket.com/albums/b341/pmguru2005/PA200534.jpg

http://i22.photobucket.com/albums/b341/pmguru2005/PA200509.jpg

http://i22.photobucket.com/albums/b341/pmguru2005/th_PA200529.jpg (http://s22.photobucket.com/albums/b341/pmguru2005/?action=view&current=PA200529.flv)

Hey dude! Hope you are well over there.

Love that spent brass! It's HUGE!!!

[Shadow6]

Hey dude! Hope you are well over there.

Love that spent brass! It's HUGE!!!

Thanks, Matt.

Doin' the best I can out here in Ass-Crack-istan.

"Love that spent brass! It's HUGE!!!" ---> That's what she said...LOL.

[M16MANIAC]

Remington 308 LTR with AAC 762SD
Leupold VX-7L LR 4-14X56
http://i449.photobucket.com/albums/qq212/KAB12869/BoggyHead015.jpg
Sighted in scope today
1st shot low and to the right
2nd went left
then shot a five shot group
This is with Georgia Arms 168gr BTHP
http://i449.photobucket.com/albums/qq212/KAB12869/BoggyHead016.jpg
5 shot Winchester Ranger 168gr BTHP
http://i449.photobucket.com/albums/qq212/KAB12869/BoggyHead020.jpg

[m24shooter]

New project. The only thing staying on it is the base.

http://i15.photobucket.com/albums/a391/m24shooter/spsthoriz.jpg

[Peshawar]

:)

http://img194.imageshack.us/img194/5041/dsc03410c.jpg
http://img194.imageshack.us/img194/473/dsc03408f.jpg
http://img40.imageshack.us/img40/9870/dsc03421t.jpg
http://img14.imageshack.us/img14/979/dsc03404o.jpg

[TriggerTX]

http://img91.imageshack.us/img91/4285/img0021i.jpg

[Robb Jensen]

I picked up a nice used Nightforce 5.5-22x NXS for my Rem 700.

http://img.photobucket.com/albums/v408/gotm4/gunpics/fullview700.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/scope2.jpg

[99HMC4]

http://i39.photobucket.com/albums/e187/Hypercomp01/CIMG3287.jpg
http://i39.photobucket.com/albums/e187/Hypercomp01/CIMG3880.jpg
http://i39.photobucket.com/albums/e187/Hypercomp01/CIMG3881.jpg

[texas12]

I picked up a nice used Nightforce 5.5-22x NXS for my Rem 700.

http://img.photobucket.com/albums/v408/gotm4/gunpics/fullview700.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/scope2.jpg
Is that a duracoat finish? cause I'm digging the paint job.

[Paulinski]

http://i39.photobucket.com/albums/e193/Dragnaath/DSCN1840.jpg

http://i39.photobucket.com/albums/e193/Dragnaath/DSCN1841.jpg

http://i39.photobucket.com/albums/e193/Dragnaath/DSCN1842.jpg

[Robb Jensen]

Is that a duracoat finish? cause I'm digging the paint job.

It's Duracoat in Magpul FDE on the stock and bipod. Norrells moly resin in tan flat on the bolt, barrel, suppressor, receiver, rings and mount.

[45user]

Rem 700 PSS reworked by R&D Precision, CA.
Wearing USO on top
http://i3.photobucket.com/albums/y87/45user/usofund015.jpg
45

[SilentReaper66]

Here's my new rifle from SC.

Remington 700 SPS V 26" heavy barrel
Bushnell fixed 10X 3200 tactical scope
Harris 9X13 bipod

[m24shooter]

http://i15.photobucket.com/albums/a391/m24shooter/boltguns/M24SPST.jpg

http://i15.photobucket.com/albums/a391/m24shooter/boltguns/SPSTright.jpg

http://i15.photobucket.com/albums/a391/m24shooter/CDI%20DBM/CDIDBM5and10rnd.jpg

http://i15.photobucket.com/albums/a391/m24shooter/CDI%20DBM/SPSTBadgerknobbaseringsCDIDBM5rnd.jpg

[TacDoc]

http://i37.tinypic.com/2eod01i.jpg
http://i33.tinypic.com/214z98p.jpg
http://i36.tinypic.com/rh8rc7.jpg
http://i36.tinypic.com/5xre52.jpg
http://i34.tinypic.com/2qx93ev.jpg
http://i35.tinypic.com/359d1c3.jpg
http://i37.tinypic.com/2nga2qu.jpg
http://i38.tinypic.com/1z37bm8.jpg
http://i34.tinypic.com/2guvyvs.jpg
http://i38.tinypic.com/34dikg1.jpg
http://i33.tinypic.com/2mqrlv6.jpg
http://i35.tinypic.com/2ignokh.jpg

[Impact]

very very nice !

here is my M40A3 ( IBA, PWS and GAP worked on it )

http://i949.photobucket.com/albums/ad340/MojaveRat/M40A3/dec09161Large.jpg

[pazzo]

First post here!!

http://i207.photobucket.com/albums/bb4/mezz0italiano/IMG_4894-2.jpg

[ZDL]

*******

[rickp]

http://i357.photobucket.com/albums/oo11/rickp1/IMG_2024.jpg

AW .308 with a S&B 4x16x42 PMII

[MSP "Sarge"]

TacDoc I like your drag bag. Who makes that?

[Impact]

not TACDOC but looks like an Eagle Industries drag bag.

ZDL: my M40A3 is a heavy sob ;)

[slickrick0999]

http://i110.photobucket.com/albums/n104/slickpics/fullgun.jpg
KMW by Terry Cross
.308 Win
McMillan A5
Surgeon Action
US Optics SSDS scope
Gemtech HVT

[sparrow]

Updated pics of my Spec. Built M40A1 with MST-100 from the last batch. Man this thing is heavy, you M40a3 guys must have insanely heavy rifles.

http://i28.photobucket.com/albums/c229/sgaaliyah/MST-100002.jpg

http://i28.photobucket.com/albums/c229/sgaaliyah/MST-100001.jpg

[robinhawkins13@comcast.ne]

http://i568.photobucket.com/albums/ss130/BULLSEYELR/DSC03065.jpg[/IMG]http://i568.photobucket.com/albums/ss130/BULLSEYELR/DSC03070.jpg[/IMG]

[Titleist]

http://farm4.static.flickr.com/3364/3269508485_12db52e240_b.jpg

[Jimmym40a2]

xxxxxxxx

[standsalone]

A1-3 next to the HTG for comparison. The Tac Ops was originally in an A5 stock. Since putting it into the A1-3 I have moved the scope forward about 1 inch.

http://i22.photobucket.com/albums/b328/georgemac/IMG_1151.jpg

http://i22.photobucket.com/albums/b328/georgemac/104_0440.jpg

I think I saw that bottom gun at Laz's house!

[George Mac]

The green ones have not been into the depths of the garage but Laz did a fantastic job on the M40A1 mini-me. That is a 223 20" 1/9 that loves 69s. She has been very happy after Laz gave her some love.

[decodeddiesel]

Not a bolt gun but this is my TS Encore 50 Cal
http://i188.photobucket.com/albums/z52/jeepwj2004/IMG_3384.jpg

WTF? :confused:

FAIL.

ETA: Mine, R700 SPS .308 (stock for now) with an NXS 3.5-15x50

http://i19.photobucket.com/albums/b200/decodeddiesel/AbbiandR700010.jpg

[jatienza]

Custom-Built Remington 700:

http://i268.photobucket.com/albums/jj31/jsatienza/CustomRemington700-3.jpg
http://i268.photobucket.com/albums/jj31/jsatienza/Picture503.jpg
http://i268.photobucket.com/albums/jj31/jsatienza/RemmyRearShot-1.jpg
http://i268.photobucket.com/albums/jj31/jsatienza/IMG_0292-1.jpg

[decodeddiesel]

http://i15.photobucket.com/albums/a391/m24shooter/CDI%20DBM/SPSTBadgerknobbaseringsCDIDBM5rnd.jpg

There's something about this rifle that I really dig. Simple, clean, well thought out.

[USAGOLD]

some great looking rifles

[snakedoctor]

First post here!!

http://i207.photobucket.com/albums/bb4/mezz0italiano/IMG_4894-2.jpg

Hey Pazzo, What model Nightfoce scope is that? Nice looking setup too!!!!

[marco.g]

700 sps, 20" bbl, mcmillan A3, shitty tasco scope that needs to go. Did the badger knob myself.
http://i1005.photobucket.com/albums/af174/marco1144/DSCN0313.jpg (http://s1005.photobucket.com/albums/af174/marco1144/?action=view&current=DSCN0313.jpg)

[NCPolice555]

nice, what kinda cheek rest is that? Tac Ops? I'm looking for one

[marco.g]

yea its a tacops.

black
http://www.snipercentral.com/shop/product_info.php?cPath=27&products_id=241

green
http://www.snipercentral.com/shop/product_info.php?cPath=27&products_id=239

[diving dave]

My Robar SR90. Topped with a US Optics SN3.
http://farm5.static.flickr.com/4068/4460824876_a9a5a44a01.jpg

[NCPolice555]

Here's mine.

Remington 700 Police in .308
Harris 6~9 Bipod
Leupold Mark 4 Scope Base & Leupold 1" QRW Quick-Release Weaver-Style Rings
Swift Riflescopes Premier SRP 6-24X50 AO
She sleeps in a Blackhawk Drag Bag :D



http://i3.photobucket.com/albums/y56/FatalVision555/my%20Guns/006.jpg

[theJanitor]

http://farm5.static.flickr.com/4007/4475594738_2d6bd9e122_b.jpg

[Scattergun]

my Remington 5R .308 waiting on it's optics.

http://img.photobucket.com/albums/v682/allproblemsolved/AICS/AICSbipod.jpg

[decodeddiesel]

@ thejanitor and Scattergun, very nice sticks.

[Tucson]

Precision on a budget...
Savage 10FP LE .308
Nikon Buckmaster Glass 4.5-14x40 on a Leupold mount
Blackhawk stock pack
Rockmount Bipod
http://i53.photobucket.com/albums/g66/jloftus/DSCF1032.jpg

[Ricardus]

I have a Remington SS 5r in .300 Win Mag (long barreled action) that I am going to put on a MODSS chassis and to that I plan to add a Vortex Viper PST 6-24 X 50 FFP scope. I hope it works out well.;)

[mark5pt56]

Since he didn't read two signs, his road ended in the dumpster--BOLT ACTIONS ONLY

[Merle]

There sure are some nice rifles on here. Here is my humble submission. Remington 721 30-06. The action on this rifle belonged to my dad and is probably over 50 years old. I rebuilt it into a nice bench rest rifle. Not much time to shoot it yet though.
http://i192.photobucket.com/albums/z198/merlebrooks/039.jpg

[Norinco]

There sure are some nice rifles on here. Here is my humble submission. Remington 721 30-06. The action on this rifle belonged to my dad and is probably over 50 years old. I rebuilt it into a nice bench rest rifle. Not much time to shoot it yet though.
http://i192.photobucket.com/albums/z198/merlebrooks/039.jpg


What barrel is that Merle??

Thanks!

[Merle]

What barrel is that Merle??

Thanks!

It's an ER Shaw barrel. I can't remember exactly what profile but it's about 1.25 inch diamter with no taper. Rifle is right around 13 pounds empty. It shoots pretty good, but I'm still new at shooting long range with a scope. I'm sure it will shoot MOA with a little more practice. I've only put 50 rounds through it since I built it.

[edwin907]

http://bellsouthpwp.net/e/d/edwin907/blt1.jpg

http://bellsouthpwp.net/e/d/edwin907/Blt.jpg

USO SN-3 is waiting on rings.

[tylerw02]

Delete

[Norinco]

Thanks Merle. NICE rifle...looks like a nail driver. :D

Dane

[SpookyPistolero]

I've had to wipe a lot of drool off my keyboard thanks to this thread! You guys have some nice sticks.

[EZ Bake]

Here's my son's bolt-gun. This gun is the reason my bolt-gun doesn't have an AICS on it or better optics (although, it does seem worth it now that he's gotten in to the long-range stuff a little bit). I guess his brother's AR is the reason that neither of my ARs have ACOGs on them, but oh well - they're both into shooting and I'm super happy to have them setup with good rigs at such a young age.

Started out as this:

http://i70.photobucket.com/albums/i91/rawatkins/Remington%20700%20II/DSCN0861.jpg


Its got a Hart barrel chopped to 22" and cut/threaded for an AAC MITER connector for the SCAR-H SD suppressor (so he could use my can - which since his name is on the trust is quickly becoming "our can"). Its on a B&C stock with a Timney trigger set at 2Lbs, a Badger 20MOA base, Burris XTR rings, a Millet TRS-1, and I think a Callahan bolt knob and .250 recoil lug (and a vickers sling & Eagle stock pack).

It needs paint and we'll probably do that together later on. Here's the pics (notice that the can is not on my rifle - it was before I left the room to get the camera and suddenly it ended up on his :D ):

http://i70.photobucket.com/albums/i91/rawatkins/Remington%20700%20II/DSCN9918.jpg

http://i70.photobucket.com/albums/i91/rawatkins/Remington%20700%20II/DSCN9919.jpg



Here's the look of joy it brought him:

http://i70.photobucket.com/albums/i91/rawatkins/Remington%20700%20II/DSCN9920.jpg




Here's my rifle (it was the one in the pics above with the green fluted barrel):

http://i70.photobucket.com/albums/i91/rawatkins/Remington%20700/DSCN02291.jpg


http://i70.photobucket.com/albums/i91/rawatkins/Remington%20700/DSCN8939.jpg

Its basically like my son's only its got a Broughton barrel machined by GAP for a surgeon (got a good deal on it with the can/connector when putting this project together). The only thing about it that I don't like is that the barrel was indexed for a much larger recoil lug than the .250 one I put on there and so the GAP logo is barely visible under the stock.

Its sitting in an HS Precision (which honestly I can't tell where the extra $200 over the B&C's price went - it wasn't quality or fit/finish), and has a slightly less cool Timney trigger in it than my son's, but has a Falcon Menace on top.

[edwin907]

Spartan MK1 .308 with US Optics SN-3 3.2-17X44 in low Badger rings.

http://i840.photobucket.com/albums/zz323/sniper907/308/spa.jpg

http://i840.photobucket.com/albums/zz323/sniper907/308/spa1.jpg

http://i840.photobucket.com/albums/zz323/sniper907/308/spa2.jpg

http://i840.photobucket.com/albums/zz323/sniper907/308/spa3.jpg

[ICEPICK]

Wicked nice Edwin! Let us know how it shoots. I bet it's a tack driver.

[Norinco]

EZ BAKE.....you might just be the coolest dad ever.

[SpookyPistolero]

Wicked nice Edwin! Let us know how it shoots. I bet it's a tack driver.

Yup, I'd say that's the luckiest kiddo in history! He'll be knockin' steel at 1000 yards by the time he's 16.

[LandCruiser]

Custom-Built Remington 700:

http://i268.photobucket.com/albums/jj31/jsatienza/CustomRemington700-3.jpg
http://i268.photobucket.com/albums/jj31/jsatienza/Picture503.jpg
http://i268.photobucket.com/albums/jj31/jsatienza/RemmyRearShot-1.jpg
http://i268.photobucket.com/albums/jj31/jsatienza/IMG_0292-1.jpg

Gorgeous rifle

[edwin907]

Wicked nice Edwin! Let us know how it shoots. I bet it's a tack driver.

After first zeroing the USO SN-3, 10 rounds of Hornady #8077 (308 WIN 178 gr BTHP MATCH SUPERFORMANCE) into a 3.05" group at 421 meters (bench, Caldwell "Rock" front, rear Triad bag, 72 degrees, clear, light wind).
I'm certainly not going to claim to be an "expert" shooter but I was pretty dang pleased with this result with factory ammo.



http://bellsouthpwp.net/e/d/edwin907/ACU.jpg

http://bellsouthpwp.net/e/d/edwin907/ACU1.jpg

[Dirk Williams]

I'd like to post a few shots of my long range, work guns, not sure how to down load pictures onto this site. Can someone set me straight.

D Williams

[HeavyDuty]

I'd like to post a few shots of my long range, work guns, not sure how to down load pictures onto this site. Can someone set me straight.

D Williams

Upload them to a photo hosting site like Photobucket, then post an in-line link in the thread here.

[altramagnus]

Here is my budget long range stick.

Savage 10FCP
McMillan A5
Versa Pod ***I know what folks say about them but I love it***
Modded bolt knob
Falcon optics *** Until I can upgrade***
Karsten cheek piece
Burris XTR Rings
SSS Box mag

http://img.photobucket.com/albums/v102/altramagnus/S1050766.jpg

http://img.photobucket.com/albums/v102/altramagnus/S1050769.jpg

http://img.photobucket.com/albums/v102/altramagnus/S1050770.jpg

http://img.photobucket.com/albums/v102/altramagnus/S1050775.jpg

Thanks for taking a look.

Shawn

[cmoore]

http://https://www.m4carbine.net/attachment.php?attachmentid=5146&stc=1&d=1275284469

Remington LTR .308 with a Tasco SS 3.5x10x40. It now has a Harris mounted under it.

[edwin907]

MPI .308 into a AICS stock.

http://i874.photobucket.com/albums/ab302/sniper907/AI/PEQb.jpg

http://i874.photobucket.com/albums/ab302/sniper907/AI/PEQa.jpg

http://i874.photobucket.com/albums/ab302/sniper907/AI/PEQ.jpg

http://i874.photobucket.com/albums/ab302/sniper907/AI/AI10a.jpg

http://i874.photobucket.com/albums/ab302/sniper907/AI/AI19a.jpg

[Dirk Williams]

Edwin very nice rifle. What action that is.

D Williams

[edwin907]

Edwin very nice rifle. What action that is.

Dirk, it's a Lawton 7000 action with a Broughton 1 in 11 twist 24" .308 barrel.

[Dirk Williams]

Edwin, thank you. You rifle is truely awesome. How do you like your scope.

D Williams

[edwin907]

Edwin, thank you. You rifle is truely awesome. How do you like your scope.

Many thanks.
I love the USO SN-3 3.2-17X44 scope. It has a high "shootability" factor.
Sharpness, color, contrast, definition, low light, they are all there.
I get asked why I didn't get the 58mm objective, but use with the AN/PVS-22 was envisioned from the start.
I also have a USO SN-3 1.8-10X37 with the exact same options, Mil-GAP reticle, turrets, illumination, ajdustable objective (I'm a lefty). It too is brilliant.
One day maybe I'll have a matching USO 3.8-22X58. At least that's the plan.

[katgirl]

There are some BEAUTIFUL rifles on this thread!!! Also some very nice firearm photography! Thx - I'll try and post an image of my own rifle. Very plain compared to these.

[Dirk Williams]

Still trying to figure out how to post pictures right on this page without having to link them, any advice?

[altramagnus]

Still trying to figure out how to post pictures right on this page without having to link them, any advice?

You will need an account somewhere like Photobucket.com (free BTW). Once you upload them you will see where you copy and paste the link.

Very simple. Have any issue drop me a line.

Shawn

[edwin907]

http://i874.photobucket.com/albums/ab302/sniper907/AI/AI5.jpg

[halo2304]

Edwin, Very AWESOME! By the way, what's the ammo carrier on the rear portion of the stock? I'm interested in a similar build and always looking for the little goodies to make it better. ;)

[edwin907]

Edwin, Very AWESOME! By the way, what's the ammo carrier on the rear portion of the stock? I'm interested in a similar build and always looking for the little goodies to make it better. ;)

Halo, it's the BauerArms(.com) AICS Ammo Management System.

http://i874.photobucket.com/albums/ab302/sniper907/AI/AI1a.jpg

[Linkpimp]

Ok well mines finally done, so now I can post it here.. Yeah..
DTA – SRS 300 win
5.5-22-56 NXS
Vltor bi-pod
Custom paint


http://i264.photobucket.com/albums/ii195/TDC57/Projects/IMG_7456.jpg

http://i264.photobucket.com/albums/ii195/TDC57/Projects/IMG_7463.jpg


Thanks for your time everybody..

[Rated21R]

That is slick. Nice work. Wish I had some of the rigs you had. :D

[Titleist]

http://lawndartdesign.com/guns/PBR.jpg

[Dirk Williams]

Titleist, nice rifle, tell us about it.

Just a thought but I wonder why you and everybody else built the rifle's were shooting.

The method, the knowledge behind the build Cal, Barrel length, Trigger, scope.

And the intended use of the rifle.

D Williams

[Seagrave7]

Titleist, nice rifle, tell us about it.

Just a thought but I wonder why you and everybody else built the rifle's were shooting.

The method, the knowledge behind the build Cal, Barrel length, Trigger, scope.

And the intended use of the rifle.

D Williams

Dirk, great thread over on WeaponEvolution.com explaining AR15 layout. Many of the same members on both forums.

http://www.weaponevolution.com/forum/showthread.php?817-Explain-your-AR15-layout...


Nevermind. Just realized this was in the precision area. Actually now I think about it. We should start a Precision Layout Thread similar to the AR15 layout thread on WE.com.

[Titleist]

Dirk, thanks.

To your question, it's an 18" barrel, .308, with the muzzle brake at the end. Trigger is the factory trigger professionally tuned down to 2.5lbs. Scope is a Leupold Mk4 4-14x in Badger Ordinance rings.

Stock is a McMillan A4 with water transfer printed digital desert, adjustable comb, and Harris 6-9 swivel bipod with Pod-Loc.

The intended use is at local long range steel matches, usually from 800-1200yds. I'm eventually going to get it set up for night shooting with a McMillan over the barrel rail, PEQ-15, clip on NOD, and AAC Cyclone.


Titleist, nice rifle, tell us about it.

Just a thought but I wonder why you and everybody else built the rifle's were shooting.

The method, the knowledge behind the build Cal, Barrel length, Trigger, scope.

And the intended use of the rifle.

D Williams

[Dirk Williams]

Titleist I like the rifle. I also admire your other rifle and shooting related equipment. Thanks for stepping up in the PNW and putting on training classes.

D Williams

[Titleist]

Titleist I like the rifle. I also admire your other rifle and shooting related equipment. Thanks for stepping up in the PNW and putting on training classes.

D Williams

Hey no problem, training is good. Training in Oregon even better. And thanks, the rifle really came out nice.

It's funny, even my friends who don't like guns want to shoot that gun.

[wahoo95]

http://i210.photobucket.com/albums/bb244/a996hawk/IMG_4297-1.jpg

[jwfuhrman]

http://i6.photobucket.com/albums/y201/paintballaddict/100_1114.jpg

[Jer]

I've got a few projects I'm working on but here's a picture to get my subscribed to the thread:

http://lh4.ggpht.com/_u5gGqJHjM6Q/TAbKBqyTu5I/AAAAAAAAAro/VlC-uL_Fvlo/s640/IMG_2109.JPG