PDA

View Full Version : SOLD: Knight's Armament (KAC) SR-15 14.5" E3 Carbine



buckjay
10-07-14, 20:22
Life's been crazy so its time to sell. A lot of time and money went into this setup. This started its life as a KAC SR-15 lower receiver (completely factory with the new 2 stage NiB trigger), added Vltor I-MOD and Magpul MOE+ Grip. I then found the tightest fitting factory SR-15 E3 SBR Carbine upper receiver so there would be no slop in the upper/lower fit. Everything was then completely disassembled and professionally cerakoted in Magpul FDE. I also had my gunsmith time the URX rail so there would be no gap between the upper receiver and rail as well as pin and weld the KAC MAMs. I also had the rail cut before being cerakoted near the front for aesthetic purposes. So this setup is non-NFA.

I've only put 180 flawless rounds through this setup.

I have well over $3,000 invested in this setup.

My price is $2,500 + shipping for the complete rifle, KAC URX panels, hand stop, a single Magpul M3 mag, and the KAC hard case. This does not include the KAC sights. KAC sights can be included for an additional $150 (only available to purchaser of entire rifle). I can also include a KAC 30mm M110 scopemount for $200 (again, only available to purchaser of entire rifle). Both the sights and scope mount were cerakoted same color as rifle.

Price is firm.

I accept USPS MO and discreet PayPal (gift or you cover the fee). I have over +200 feedback on TOS (as well as great feedback here).

http://buckjay.com/drop/sell/kac14_fs_1.jpg
http://buckjay.com/drop/sell/kac14_fs_2.jpg
http://buckjay.com/drop/sell/kac14_fs_3.jpg


Some pictures of how I had it set up before:

http://buckjay.com/drop/kac-sr15-14-2.jpg
http://buckjay.com/drop/kac-sr15-14-2-2.jpg
http://buckjay.com/drop/kac-14-fde-4.jpg