Timbonez
11-22-14, 14:33
I took pictures to provide as true a representation of each of the firearms listed. If you have any questions concerning the pictures or firearms, feel free to contact me. I am not looking for any trades right now, since I am just trying to decrease the number of firearms I own. I don't really shoot these so I figure someone else can enjoy them rather than me have them sit in the back of my safe.
I am active duty military and my bank is USAA. As such, I don't have a physical location to deposit cash from money orders. My preferred form of payment is a personal check (I can deposit electronically) or electronic funds transfer to my account. You will also need to provide a copy of your dealer's FFL along with your payment before I ship. On to the firearms...
FN FNX-45 in FDE
I bought this pistol a little over a year ago and put exactly 650 rounds through it with 0 malfunctions. You will get the original case and mags plus 2 all black FNX-45 15 round mags and a KT Mech OWB kydex holster. The pistol is overly tight in the holster when worn on a belt, so I suggest you use a heat gun to help loosen it up. I am asking for $655 shipped for everything listed. Note: the picture of the bore shows the feed ramp all blurry. It is shiny with no defects.
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/IMG_20140109_115445_473.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/IMG_20140109_115445_473.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/IMG_20140109_115111_347.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/IMG_20140109_115111_347.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/IMG_20140109_115711_227.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/IMG_20140109_115711_227.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/EC8DA3F0-4168-4C0F-A3C1-346E51F5DE65.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/EC8DA3F0-4168-4C0F-A3C1-346E51F5DE65.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/86BD65F7-3712-43C5-864F-B81906CCF97B.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/86BD65F7-3712-43C5-864F-B81906CCF97B.jpg.html)
S&W Model 39
I bought this pistol and replaced every single spring inside of it with factory standard weight ones. I put 100 rounds through it and haven't touch it since. You get the pistol and one magazine. You will notice the left side of the mag does have some pitting on it, but this did not affect the function with the limited number of rounds I put through the gun. There is no rust or pitting located on the pistol itself. It does show wear on the high spots and on parts of the aluminum frame, particularly the rails. I am asking for $405 shipped (was $455).
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/14AF0241-937A-4653-8C0E-E57AC747A3A2.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/14AF0241-937A-4653-8C0E-E57AC747A3A2.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/C10332B5-6D6C-41F0-8FA2-B7F6CD7A1897.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/C10332B5-6D6C-41F0-8FA2-B7F6CD7A1897.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/554A87CE-1F55-4EDF-B064-0A77542D5C49.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/554A87CE-1F55-4EDF-B064-0A77542D5C49.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/529B454B-8416-4CE8-BD88-87BA2C3F6FD0.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/529B454B-8416-4CE8-BD88-87BA2C3F6FD0.jpg.html)
S&W M&P9
This is a Cabela's exclusive version of the M&P. The frame is FDE with black accents for the palmswell and slide. I replaced many of the internals with Apex Tactical parts to include: Aluminum trigger, duty/carry action enhancement kit (ultimate striker block, striker block spring, sear, sear spring, trigger return spring). I also replaced the sights with 10-8 performance sights. The rear is a u-notch serrated black, and the front is a brass bead. I've put 869 rounds through it, with over 700 of those rounds using the new parts. I experienced no malfunctions. You get the original case along with the Cabela's additional items (blade-tech, uplula), 3 mags, S/M/L palmswells, and a JM custom kydex OWB holster, and the original internal parts and sights if you wish to put them back. I'm asking for $610 shipped. SOLD
SOLD Nighthawk Custom Talon IV SOLD
Last is a Nighthawk Custom Talon IV. I am the second owner of this pistol. I personally put 575 rounds through it, but I am not sure how many the previous owner put through it. The slide is permacote black and the frame is chrome. It comes with 3 7-rd Nighthawk marked magazines and 1 7-rd Wilson Combat magazine. You will also get the gun bag it came in along with 3 extra 24# recoil springs. You will see on the front of the two piece guide rod, a piece of metal is missing where you would use an allen wrench to disassemble. That is from the previous owner and it does not affect function or disassembly. I am asking for $1800 shipped (was $2000).
I am active duty military and my bank is USAA. As such, I don't have a physical location to deposit cash from money orders. My preferred form of payment is a personal check (I can deposit electronically) or electronic funds transfer to my account. You will also need to provide a copy of your dealer's FFL along with your payment before I ship. On to the firearms...
FN FNX-45 in FDE
I bought this pistol a little over a year ago and put exactly 650 rounds through it with 0 malfunctions. You will get the original case and mags plus 2 all black FNX-45 15 round mags and a KT Mech OWB kydex holster. The pistol is overly tight in the holster when worn on a belt, so I suggest you use a heat gun to help loosen it up. I am asking for $655 shipped for everything listed. Note: the picture of the bore shows the feed ramp all blurry. It is shiny with no defects.
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/IMG_20140109_115445_473.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/IMG_20140109_115445_473.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/IMG_20140109_115111_347.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/IMG_20140109_115111_347.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/IMG_20140109_115711_227.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/IMG_20140109_115711_227.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/EC8DA3F0-4168-4C0F-A3C1-346E51F5DE65.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/EC8DA3F0-4168-4C0F-A3C1-346E51F5DE65.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/86BD65F7-3712-43C5-864F-B81906CCF97B.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/86BD65F7-3712-43C5-864F-B81906CCF97B.jpg.html)
S&W Model 39
I bought this pistol and replaced every single spring inside of it with factory standard weight ones. I put 100 rounds through it and haven't touch it since. You get the pistol and one magazine. You will notice the left side of the mag does have some pitting on it, but this did not affect the function with the limited number of rounds I put through the gun. There is no rust or pitting located on the pistol itself. It does show wear on the high spots and on parts of the aluminum frame, particularly the rails. I am asking for $405 shipped (was $455).
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/14AF0241-937A-4653-8C0E-E57AC747A3A2.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/14AF0241-937A-4653-8C0E-E57AC747A3A2.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/C10332B5-6D6C-41F0-8FA2-B7F6CD7A1897.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/C10332B5-6D6C-41F0-8FA2-B7F6CD7A1897.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/554A87CE-1F55-4EDF-B064-0A77542D5C49.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/554A87CE-1F55-4EDF-B064-0A77542D5C49.jpg.html)
http://i1106.photobucket.com/albums/h380/Timbonez/Sell/529B454B-8416-4CE8-BD88-87BA2C3F6FD0.jpg (http://s1106.photobucket.com/user/Timbonez/media/Sell/529B454B-8416-4CE8-BD88-87BA2C3F6FD0.jpg.html)
S&W M&P9
This is a Cabela's exclusive version of the M&P. The frame is FDE with black accents for the palmswell and slide. I replaced many of the internals with Apex Tactical parts to include: Aluminum trigger, duty/carry action enhancement kit (ultimate striker block, striker block spring, sear, sear spring, trigger return spring). I also replaced the sights with 10-8 performance sights. The rear is a u-notch serrated black, and the front is a brass bead. I've put 869 rounds through it, with over 700 of those rounds using the new parts. I experienced no malfunctions. You get the original case along with the Cabela's additional items (blade-tech, uplula), 3 mags, S/M/L palmswells, and a JM custom kydex OWB holster, and the original internal parts and sights if you wish to put them back. I'm asking for $610 shipped. SOLD
SOLD Nighthawk Custom Talon IV SOLD
Last is a Nighthawk Custom Talon IV. I am the second owner of this pistol. I personally put 575 rounds through it, but I am not sure how many the previous owner put through it. The slide is permacote black and the frame is chrome. It comes with 3 7-rd Nighthawk marked magazines and 1 7-rd Wilson Combat magazine. You will also get the gun bag it came in along with 3 extra 24# recoil springs. You will see on the front of the two piece guide rod, a piece of metal is missing where you would use an allen wrench to disassemble. That is from the previous owner and it does not affect function or disassembly. I am asking for $1800 shipped (was $2000).