PDA

View Full Version : Just ordered a Geissele Service Rifle...



billybronco
07-14-08, 20:23
...trigger.

I shouldn't have any issues with compatibility with a Sun Devil lower, right?

bullitt5172
07-14-08, 21:11
...trigger.

I shouldn't have any issues with compatibility with a Sun Devil lower, right?

Should drop right in, good choice!

losbronces
07-15-08, 00:09
...trigger.

I shouldn't have any issues with compatibility with a Sun Devil lower, right?

Where did you find it? Geisselle triggers have been scarce lately.

Warrior
07-15-08, 00:15
You'll never want to go back to any other trigger!!

billybronco
07-15-08, 07:42
Got it from PK Firearms.

Per Brett, they have "several".

Might wanna grab one !!!!!

Wayne Dobbs
07-15-08, 09:01
Is the service rifle version the new lower priced one? If so, do you have a point of contact for this vendor that has them?

billybronco
07-15-08, 09:12
http://www.pkfirearms.com/store/get_items.aspx?type=0&term=12&pg=4


think it was 289.00 including shipping.

billybronco
07-15-08, 09:13
ooops. sorry, go to the next page over, 5.

it's at the top.

HolyRoller
07-15-08, 16:12
billybronco, funny you should ask about compatibility only AFTER you bought it! :D sounds like something I would do. Mine fit just fine in my DPMS LR-308 lower. Per Geissele instructions, you may need a Dremel with cutoff wheel to widen the slot in the selector shaft so the trigger body will pass through.

I got my Geissele from ADCO a couple months ago. Don't know how many they have left. I've heard only rumors as to when more will be in the pipeline, so check at the official Geissele Automatics site. They may be reliably informed.

DrMark
07-15-08, 21:24
Per Geissele instructions, you may need a Dremel with cutoff wheel to widen the slot in the selector shaft so the trigger body will pass through.

I had to do this when I installed mine.

As HolyRoller says, the procedure is covered in the intructions.

Great trigger!

Paladin4415
07-15-08, 22:51
Is the service rifle version the new lower priced one? If so, do you have a point of contact for this vendor that has them?

No, that is the SSA trigger. I think Adco is the only vendor for the SSA at this time.

jmart
07-15-08, 23:13
If you are looking for the SR trigger and can't find one, check the competition sites, WOP, Compass Lake, Creedmore, etc. Most of them carry them.