XM16E1 and M16A1 clone builds

[Renegade04]

For the past couple months, I have been collecting parts to build two retro ARs - XM16E1 and M16A1. In the past week, I have gotten a lot closer. I managed to get the upper finished for the M16A1 and the lower finished for the XM16E1. Still waiting to get the lower for the M16A1. That may take a few months. I still need to send the GM no-forge code upper (XM16E1) off to US Anodizing to have the XM Gray anodizing done. Everything else is sitting idly by in anticipation. Here are a few pics of the progress.

XM16E1 lower assembly

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/008_zpshzllgsnj.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/008_zpshzllgsnj.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/007_zpsadx5owzg.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/007_zpsadx5owzg.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/009_zpsjitdlfb9.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/009_zpsjitdlfb9.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/010_zpsetg5snul.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/010_zpsetg5snul.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/011_zpsmyzdvunp.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/011_zpsmyzdvunp.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/013_zpsvzz8ekgs.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/013_zpsvzz8ekgs.jpg.html)


Here are a few pics of the M16A1 upper on the XM16E1 lower.

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/001_zps7n0vwyz9.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/001_zps7n0vwyz9.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/004_zpsw5py0djx.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/004_zpsw5py0djx.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/003_zps6gdnpgvc.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/003_zps6gdnpgvc.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/005_zpshvc55qw1.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/Retro%20parts%20and%20accessories/005_zpshvc55qw1.jpg.html)

When I get the XM upper done, it will get distressed to match the lower. The same when I get the A1 lower. It will be done to match the A1 upper.

[CAR-AR-M16]

That looks great. Love the distressed look.

[Renegade04]

That looks great. Love the distressed look.

Thank you. :)

[Renegade04]

Here is an update on the progress. The GM no forge code upper (XM16E1) has been sent to Victor at US Anodizing to have the XM Gray hardcoat anodizing. They started working on it last week. Hopefully, I will have it back in my hands in a couple weeks. A few weeks ago, I ordered a Nodak Spud NDS-16A1 lower for the M16A1 clone and I am still in a holding pattern with it. In the meantime, I received an e-mail from Maurice McKay at McKay Enterprises telling me that they finally had a limited amount of new A1 lowers (anodized in XM Gray by US Anodizing) that were available. I immediately gave him a call and got it ordered. It arrives at my FFL tomorrow. This means that I will be able to finish up the M16A1 clone in the next couple days. If all goes well with the XM upper, I will have that build done in just a few weeks. As I stated in another thread, I am already gathering parts for my next build (605). I have a bunch of parts arriving today from Indiana Army Surplus. I recently won an auction on GB for a Colt 604 upper and I have a chrome 601 slickside BCG coming as well. Next step is to get the barrel and have it worked on.

[CAR-AR-M16]

Here is an update on the progress. The GM no forge code upper (XM16E1) has been sent to Victor at US Anodizing to have the XM Gray hardcoat anodizing. They started working on it last week. Hopefully, I will have it back in my hands in a couple weeks. A few weeks ago, I ordered a Nodak Spud NDS-16A1 lower for the M16A1 clone and I am still in a holding pattern with it. In the meantime, I received an e-mail from Maurice McKay at McKay Enterprises telling me that they finally had a limited amount of new A1 lowers (anodized in XM Gray by US Anodizing) that were available. I immediately gave him a call and got it ordered. It arrives at my FFL tomorrow. This means that I will be able to finish up the M16A1 clone in the next couple days. If all goes well with the XM upper, I will have that build done in just a few weeks. As I stated in another thread, I am already gathering parts for my next build (605). I have a bunch of parts arriving today from Indiana Army Surplus. I recently won an auction on GB for a Colt 604 upper and I have a chrome 601 slickside BCG coming as well. Next step is to get the barrel and have it worked on.

Can you please post some pics of the McKay lower when it arrives. Curious to see how they look now.

[Renegade04]

Can you please post some pics of the McKay lower when it arrives. Curious to see how they look now.

Will do.

[Renegade04]

Well guys, I finally have the M16A1 (early to mid 1970s build) done. It sports the new McKay Enterprise lower. As you can see, I have already distressed the lower to closely match the Colt upper.

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/001_zpsu5szhboj.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/001_zpsu5szhboj.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/002_zpsiafiv0u5.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/002_zpsiafiv0u5.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/008_zps9ih7ibku.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/008_zps9ih7ibku.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/004_zpsfzhmpi26.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/004_zpsfzhmpi26.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/011_zpsdyyrxcrl.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/011_zpsdyyrxcrl.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/010_zpsws5da3mk.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/010_zpsws5da3mk.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/009_zpsakr3on6y.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/009_zpsakr3on6y.jpg.html)

[Renegade04]

When I got the McKay Enterprise lower home last night and got started, it did have a couple issues of which I have already alerted Maurice McKay about. The only two issues I had with it are that the takedown pin holes were just a bit too small. I used a .250" drill bit and fixed that. The second thing is the metal around the receiver extension area. There are some raised ridges, but they are just slightly raised. The anodizing is first class since it was done by US Anodizing (same guys that do Nodak Spuds receivers). Also, these lowers are priced at $139 as compared to Nodak's at $160. If McKay can get the two issues solved, these will be a nice alternative to Nodak. It will just be a matter of them having them in stock. Here are some pics. Bear in mind, I have already distressed the finish to closely match that of the Colt upper.

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/002_zpsiafiv0u5.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/002_zpsiafiv0u5.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/011_zpsdyyrxcrl.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/011_zpsdyyrxcrl.jpg.html)


You can see the ridges in this pic.

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/012_zpsanu1c1vq.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/012_zpsanu1c1vq.jpg.html)

[CAR-AR-M16]

Looks great. Thanks for posting. If they fix the issues and don't raise the price, they will be a good alternative to the NODak lowers.

[Renegade04]

As far as the price goes, I just found out that they are now $155. I am glad I got mine early. I am still waiting to hear back from Maurice about the two issues. I am sure they will address these in the next batch.

[militarymoron]

thanks for the update on the mckay lower, renegade. i've been checking out your retro clone builds here and on the other site and appreciate your attention to details.
i haven't been bit by the retro clone bug yet (too much time and expense), but i did stick together a "re-imagined' retro-esque XM recently. i was going through old boxes and found some old A1 parts that i had forgotten about and had enough to put together half a build, so i did just for fun. i wasn't concerned with authenticity, but i did want it to channel the 'essence' of a distressed XM.

[Renegade04]

thanks for the update on the mckay lower, renegade. i've been checking out your retro clone builds here and on the other site and appreciate your attention to details.
i haven't been bit by the retro clone bug yet (too much time and expense), but i did stick together a "re-imagined' retro-esque XM recently. i was going through old boxes and found some old A1 parts that i had forgotten about and had enough to put together half a build, so i did just for fun. i wasn't concerned with authenticity, but i did want it to channel the 'essence' of an XM.

Thank you for the compliment. If you ever decide to dwelve into the retro world, be prepared. It can be very nerve racking and costly. It requires a lot thought on what to build and a lot of patience when it comes to gathering parts. Original parts are getting more difficult to find and they are getting more costly. I am glad that I have a good network that I use to find my parts. I still have to finish up the upper assembly on the XM16E1. I hope to have the upper receiver back from anodizing in a couple weeks. After I get it, I will have the build done that day. I have also started getting in parts for a 605 build. I have been wanting to do one of these for a few years and I have finally taken the plunge.

[Renegade04]

The XM16E1 is done. I got the upper in today and proceeded to distress it to match the lower. Got it assembled and did a quick function check to make sure everything was smooth. Here it is.

This is after I distressed the upper and installed the sight assembly, port door assembly, and forward assist assembly.

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/001_zpswmfi54zw.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/001_zpswmfi54zw.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/002_zpss8vpstja.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/002_zpss8vpstja.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/003_zpszhecsnc9.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/003_zpszhecsnc9.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/004_zpspeakynf6.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/004_zpspeakynf6.jpg.html)


Here is the assembled product.

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/005_zpssbeepdma.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/005_zpssbeepdma.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/013_zpsvrbmxy1z.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/013_zpsvrbmxy1z.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/008_zpszrey95qx.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/008_zpszrey95qx.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/015_zpsv00ftqb9.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/015_zpsv00ftqb9.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/006_zpslwokbkpx.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/006_zpslwokbkpx.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/007_zpso8xxlb68.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/007_zpso8xxlb68.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/016_zpsvhga4moi.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/016_zpsvhga4moi.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/011_zpscctv1gg4.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/011_zpscctv1gg4.jpg.html)

http://i100.photobucket.com/albums/m8/jamesrea_2006/Weapons%202014/Retro%20ARs/XM16E1/012_zpsinkl2xm1.jpg (http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/XM16E1/012_zpsinkl2xm1.jpg.html)

Now, on to the 605 build.

[militarymoron]

i like it. i think that retro/vintage builds look so much better distressed. nicely done.