Mr. Clean
10-18-15, 19:40
More Fall cleaning of the bench gear bin. Getting down to the smaller items now. Most of these are either like new or saw limited use. They were at a secondary location.
First up is a like new Brownells AR-15/M16 Upper Receiver Action Block. From Brownells website HERE (http://www.brownells.com/gunsmith-tools-supplies/rifle-tools/bench-vise-blocks/ar-15-m16-upper-receiver-action-block-prod22385.aspx):
Heavy-duty blocks allow you to firmly clamp AR-15/M16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural Rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the AR-15/M16 an easy, one-man job. Lets you tightly clamp a carry handle receiver or flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, not the receiver. Minimizes the possibility of damage to the barrel detent pin and receiver detent notch. Holds securely without marring the finish
Lists for $60.
$45, shipped *** SOLD ***
Next up is a DPMS AR-15 Upper Receiver Action Block. From Brownells website HERE (http://www.brownells.com/gunsmith-tools-supplies/rifle-tools/bench-vise-blocks/ar-15-upper-receiver-block-prod17094.aspx)
Machined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250" diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard AR-15 and DPMS AR-style .308 receivers.
I don't believe this was ever used. Lists for $38.
$20 Shipped *** SOLD ***
Last Up is a Cross Tac Magwell Block and Hammer Block
More from MidwayUSA site HERE (http://www.midwayusa.com/product/698333/crosstac-armorers-action-block-and-hammer-block-ar-15)
Reversible action block inserts into an AR-15 upper or lower receiver and clamps into a vise, firmly positioning the part for nearly any gunsmithing task. Precision CNC-Machined from polyethylene, this action block is impervious to all oils and solvents. Hammer block is ideal for checking a trigger job.
Set Lists for $55.
$25 Shipped *** SOLD ***
** Reasonable Offers Welcome. **
CONUS only. Payment by USPS MO or PayPal plus any fees.
First up is a like new Brownells AR-15/M16 Upper Receiver Action Block. From Brownells website HERE (http://www.brownells.com/gunsmith-tools-supplies/rifle-tools/bench-vise-blocks/ar-15-m16-upper-receiver-action-block-prod22385.aspx):
Heavy-duty blocks allow you to firmly clamp AR-15/M16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural Rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the AR-15/M16 an easy, one-man job. Lets you tightly clamp a carry handle receiver or flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, not the receiver. Minimizes the possibility of damage to the barrel detent pin and receiver detent notch. Holds securely without marring the finish
Lists for $60.
$45, shipped *** SOLD ***
Next up is a DPMS AR-15 Upper Receiver Action Block. From Brownells website HERE (http://www.brownells.com/gunsmith-tools-supplies/rifle-tools/bench-vise-blocks/ar-15-upper-receiver-block-prod17094.aspx)
Machined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250" diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard AR-15 and DPMS AR-style .308 receivers.
I don't believe this was ever used. Lists for $38.
$20 Shipped *** SOLD ***
Last Up is a Cross Tac Magwell Block and Hammer Block
More from MidwayUSA site HERE (http://www.midwayusa.com/product/698333/crosstac-armorers-action-block-and-hammer-block-ar-15)
Reversible action block inserts into an AR-15 upper or lower receiver and clamps into a vise, firmly positioning the part for nearly any gunsmithing task. Precision CNC-Machined from polyethylene, this action block is impervious to all oils and solvents. Hammer block is ideal for checking a trigger job.
Set Lists for $55.
$25 Shipped *** SOLD ***
** Reasonable Offers Welcome. **
CONUS only. Payment by USPS MO or PayPal plus any fees.