TH Moxy
11-05-15, 11:41
MSRP: 289 + tax / shipping
Asking 250 SHIPPED PRIORITY INSURED, CARBINE TUBE (can add Gas Block too)
Barrel is in GOOD condition cosmetically, marks where gas block was installed, old thread locker on threads. Barrel was not shot hardly at all, maybe 100 rounds, if that. Most is light cosmetic wear from sitting in parts bins.
Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.
Stripped Barrel 1.28lbs
Barrel w/ LPG 1.36lbs
Barrel w/ FSB 1.59lbs
All Daniel Defense cold hammer forged barrels are made from start to finish in our state-of-the-art facility located in Black Creek, GA. In keeping with our heritage of not cutting corners, all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating or Salt Bath Nitride Finish. These barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.
NFA DISCLAIMER
Once this part is assembled into a complete firearm, it becomes a regulated item by the National Firearms Act (NFA). Please check with your local and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply with all NFA rules and applicable laws.
WARRANTY STATEMENT
All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.
ADDITIONAL INFORMATION
Manufacturing # / SKU 11.5"_Carbine_GOV_Barrel
Restricted Shipping No
Caliber 5.56mm NATO
Barrel Length 11.5"
Manuf. Process Cold Hammer Forged
Twist Rate 1:7
Muzzle Thread 1⁄2×28 TPI (Threads Per Inch)
Material Chrome Moly Vanadium
Outside Finish Mil-Spec Heavy Phosphate
Inside Finish Chrome
Gas System Carbine Length
Diameter At Gas Port .750″
Barrel Extension A4
Profile Government
Weight 1.28lbs
Manufacturer Daniel Defense
Asking 250 SHIPPED PRIORITY INSURED, CARBINE TUBE (can add Gas Block too)
Barrel is in GOOD condition cosmetically, marks where gas block was installed, old thread locker on threads. Barrel was not shot hardly at all, maybe 100 rounds, if that. Most is light cosmetic wear from sitting in parts bins.
Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.
Stripped Barrel 1.28lbs
Barrel w/ LPG 1.36lbs
Barrel w/ FSB 1.59lbs
All Daniel Defense cold hammer forged barrels are made from start to finish in our state-of-the-art facility located in Black Creek, GA. In keeping with our heritage of not cutting corners, all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating or Salt Bath Nitride Finish. These barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.
NFA DISCLAIMER
Once this part is assembled into a complete firearm, it becomes a regulated item by the National Firearms Act (NFA). Please check with your local and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply with all NFA rules and applicable laws.
WARRANTY STATEMENT
All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.
ADDITIONAL INFORMATION
Manufacturing # / SKU 11.5"_Carbine_GOV_Barrel
Restricted Shipping No
Caliber 5.56mm NATO
Barrel Length 11.5"
Manuf. Process Cold Hammer Forged
Twist Rate 1:7
Muzzle Thread 1⁄2×28 TPI (Threads Per Inch)
Material Chrome Moly Vanadium
Outside Finish Mil-Spec Heavy Phosphate
Inside Finish Chrome
Gas System Carbine Length
Diameter At Gas Port .750″
Barrel Extension A4
Profile Government
Weight 1.28lbs
Manufacturer Daniel Defense