PDA

View Full Version : Mayflower LEPC w/D3CR set up. Help.


blgjr64
07-05-16, 14:14
Recently obtained a Mayflower LE plate carrier by Velocity systems for a good price. I have been looking for a set up just like this to pair with my Haley Strategic D3CR rig. Perfect setup for what I need at work.

It pairs well with the clips on top and the velcro on the back. The problem I would like to fix is to anchor the clips on the side of the D3 to some kind of swift clips. My cummerbund is sleek (elastic). The only Molle is on the back of the carrier. Swift clips appear to be too short and won't reach that far. Iv looked at DownRangeGear's basic strap kit but it allows for only 8" length of adjustment which is not enough to reach the Molle on the back of my carrier.

Does anyone know of any other "strap kit system" that could accommodate my setup?

Here are some pics to show the problem:

http://uploads.tapatalk-cdn.com/20160705/f9cb82eac79640c810c9df591b42bc8a.jpg

http://uploads.tapatalk-cdn.com/20160705/df43bf7e208943a9c09b9cb2adedac07.jpg

http://uploads.tapatalk-cdn.com/20160705/9bbc5e6fffbb733909a35dc238f23c00.jpg

Links of the equipment:

https://www.velsyst.com/law-enforcement-plate-carrier.html

http://www.haleystrategic.com/disruptive-environments-chest-rig-d3cr

Any help would be appreciated.

Thanks


Sent from my iPhone using Tapatalk
rfairman
07-05-16, 14:16
I ran a banshee plate carrier for a while and it came with these "T" straps so you could run without the cumberbund maybe try getting a set of those?


Sent from my iPhone using Tapatalk
blgjr64
07-05-16, 16:16
Do you have a link for those?


Sent from my iPhone using Tapatalk
jpmuscle
07-05-16, 16:20
Just get the cummerbund with molle? Would be the most expedient solution.
rfairman
07-05-16, 16:27
There is no option for just the straps that I can find but I'm sure if you called them you could get a set


Sent from my iPhone using Tapatalk
eggroll
08-16-16, 15:16
Blgr64. Email me at eglabsinfo@gmail.com, I have some options for cases like yours
drtywk
08-16-16, 20:11
Egg will have a solid solution for you, or you can pick up one of these: https://www.velsyst.com/chest-rig-adapter-kit.html. I have used one with a D3CR on a Velocity Low Profile Plate Carrier with no issues.
jpmuscle
08-16-16, 20:29
Egg will have a solid solution for you, or you can pick up one of these: https://www.velsyst.com/chest-rig-adapter-kit.html. I have used one with a D3CR on a Velocity Low Profile Plate Carrier with no issues.

That's actually not a b ad looking set up. You wouldnt happen to have any pics of you wearing it by chance would you? I have both a LWPC and JPC 2.0 but I'm always tinkering with them.

on my LWPC I run one of the PIG elastic cummerbunds. Very stable but downside is I'm pretty much relegated to running to only running the basic front placard. If I could run the referenced chest rig adapter kit in addition to the PIG cummerbund it would certainly open up more options such as the D3CR, mayflower pusher, etc. I'm waiting on a spiritus kit to come in for my JPC.

OP, sorry for the mild thread jack lol
HMM
08-17-16, 09:31
You could always just make some clips using paracord. Hook it on the molle of the back panel and then put a clip on the end.

Hopefully these pics will work, best I could find to try to explain:


Sorry pics didn't work...

http://downrangegear.net/Down_Range_Gear_Chest_Rig__Armor_Interface_Kit.html
drtywk
08-17-16, 11:33
That's actually not a b ad looking set up. You wouldnt happen to have any pics of you wearing it by chance would you? I have both a LWPC and JPC 2.0 but I'm always tinkering with them.

on my LWPC I run one of the PIG elastic cummerbunds. Very stable but downside is I'm pretty much relegated to running to only running the basic front placard. If I could run the referenced chest rig adapter kit in addition to the PIG cummerbund it would certainly open up more options such as the D3CR, mayflower pusher, etc. I'm waiting on a spiritus kit to come in for my JPC.

OP, sorry for the mild thread jack lol

Sorry no pics of it being worn, but it is pretty straight forward with the straps on each side riding over the cummerbund. The straps are adjustable in order to reduce the slack in them. It works just like their SwiftClip set, but the straps are sewn into a panel which also allows you to remove the existing cummerbund if you wanted to.
dm2206
08-20-16, 16:20
Get the MOLLE cummerbund or just go without the straps on the D3. The Velcro should hold it fine. Otherwise use the chest rig strap that comes with it and run it around your waist to secure the bottom part of the D3


Sent from my iPhone using Tapatalk