PDA

View Full Version : Looking for Keymod covers, post what you have.


ISiman/oh
08-07-16, 05:26
I'm looking for some ideas on what keymod rail covers to get. I know BCM offers some but would like to see what everybody is running. Please post what you use and if you have pictures and links as well. Here is a picture of my rail as it appears slimmer then most. Thankyou
http://uploads.tapatalk-cdn.com/20160807/f01e3d33c75cc77657d6ab97f5b5d192.png


Sent from my iPhone using Tapatalk
bighawk
08-07-16, 05:38
I have the BCM covers on my 11.5 and they are nice and grippy and very slim.

The Noveske covers look they may work well on your hand guard and I have those on two other guns and I like them as well. They are also slim but they are fairly smooth.

I've heard good things about rail scales and they might be worth checking out ... http://www.getrailscales.com/category-s/1838.htm
Tigereye
08-07-16, 06:02
I like the BCM covers. Thin, grippy, and inexpensive.
aclawrence
08-07-16, 06:45
Do any of you know if the BCM covers will work on a Daniel Defense slim rail? I have looked on DD's site but could not find any. Just got my first rifle with keymod so I'm a newbie.
Ryno12
08-07-16, 07:09
The OP's rifle only has slots at 3, 6 & 9 positions, so I think the MI covers will serve you better than the BCM.
I do agree though that the BCM covers are nice.

Here's pics of my 11.5" with both covers.

BCM
http://uploads.tapatalk-cdn.com/20160807/a389abc0aa71886543aaddf6cd107a0d.jpg

MI (middle)
http://uploads.tapatalk-cdn.com/20160807/903d9631e90f3252f3b85f29816366d0.jpg
ISiman/oh
08-07-16, 08:21
Thanks everyone. I will check out the MI.


Sent from my iPhone using Tapatalk
wigbones
08-07-16, 08:57
Noveske keymod covers.
40878
harveyspecter
08-07-16, 09:15
I'm looking for some ideas on what keymod rail covers to get. I know BCM offers some but would like to see what everybody is running. Please post what you use and if you have pictures and links as well. Here is a picture of my rail as it appears slimmer then most. Thankyou
how to do a screenshot on a mac (https://www.youtube.com/watch?v=3l69cYJVTf0)

Let's try bcm covers. i think it will good. Check the best handgun safe in zentiz website (http://www.zentiz.com/best-gun-safe-reviews/).
SiGfever
08-07-16, 09:35
I have the Noveske on my 13" KMR, I have heard good things about the BCM covers but they were not out when I purchased my URG.
ISiman/oh
08-07-16, 09:51
Let's try bcm covers. i think it will good

I was looking into them but I appears they are designed for rails with keymod slots at 2,3,4,6,8,9 o'clock. My rail only has slots at 3,6 and 9.


Sent from my iPhone using Tapatalk
Benito
08-07-16, 11:15
I have some Midwest Industries covers and hand stop panels, and they are very nice and reasonably priced.
bighawk
08-07-16, 11:30
I've been interested in the Midwest panels for a while.. Do they have a texture on them or are they pretty smooth? Can't get my hands on any locally..


Sent from my iPhone using Tapatalk
johnking
08-07-16, 12:56
i have some BCM cover, they are not too bad.
johnking
08-07-16, 12:57
KAC made some bad ass looking cover too, Railscales also has some bad ass looking one, but a little expensive.
johnking
08-07-16, 13:02
40880
https://scontent.cdninstagram.com/t51.2885-15/s320x320/e15/11189270_666988646779722_689374089_n.jpg
johnking
08-07-16, 13:03
http://i.imgur.com/TcVjoSK.jpg
KAC rail cover
sublimeon24s
08-07-16, 16:32
Im running the rubber Ergo snap in panels and absolutely love them. They withstand heat up to 275 degrees, push in nice and tight in a few seconds, and are super comfortable to grip. I previously had the BCM's but the sandpaper texture wasnt for me

http://i150.photobucket.com/albums/s92/chargeron24s/IMG_1523_zps0edyzebf.jpg

http://i150.photobucket.com/albums/s92/chargeron24s/IMG_1529_zpszhkaa8ua.jpg
aclawrence
08-07-16, 16:46
Im running the rubber Ergo snap in panels and absolutely love them. They withstand heat up to 275 degrees, push in nice and tight in a few seconds, and are super comfortable to grip. I previously had the BCM's but the sandpaper texture wasnt for me

http://i150.photobucket.com/albums/s92/chargeron24s/IMG_1523_zps0edyzebf.jpg

http://i150.photobucket.com/albums/s92/chargeron24s/IMG_1529_zpszhkaa8ua.jpg

Thanks! I guess any keymod panels would work on the slim rail but wasn't sure if some would stick out or be too wide.
Lefty223
08-07-16, 17:11
Awesome on the Ergos, as so far I LOVE anything & everything of their's that I have tried. I have some keymod grippies that fold in the middle for insertion - clearly a Gen-1 attempt - as they SUCK royally! Will post pictures later ... as am still on the boat ...
sublimeon24s
08-07-16, 17:13
Thanks! I guess any keymod panels would work on the slim rail but wasn't sure if some would stick out or be too wide.

They are a tad thicker then the BCM's. Here is a better angle showing how much they come off the rail

http://i150.photobucket.com/albums/s92/chargeron24s/IMG_1520_zps9dqdg2lp.jpg
unclebud
08-07-16, 18:33
I like the low profile of the BCM's, they look thinner than some of the others.
tgizzard
08-07-16, 18:57
I was running the KAC covers for a while, they were a bit tough to get on initially, but while I used them they were good to go. I ended up taking them off and have been running the rails bare since, preference thing.
johnking
08-07-16, 19:28
I'm running bare right now, with all the rail cover on. It getting hot quick, too much heat trapped.
Cane55
08-08-16, 09:15
BCM is the best I've tried. They are extremely high quality, give great grip, and also do a surprisingly well job at blocking heat. Add in the fact that they are very affordable makes them a great product to have.
mjarcuri
08-08-16, 09:38
Do any of you know if the BCM covers will work on a Daniel Defense slim rail? I have looked on DD's site but could not find any. Just got my first rifle with keymod so I'm a newbie.

Yes they will