jwperry
09-13-16, 21:05
Trying to clean up some of my Sig parts and turn them into things that I'll actually use. All items are used.
PLEASE PM OR EMAIL ME WHEN POSSIBLE! I MIGHT NOT CHECK THE THREAD ON A REGULAR BASIS.
1 - Heinie night sights. These come with a story...
The first set I put on my 9mm SCT went on great and fit great. I then put a set on my P228 (that's being sold as a kit above) and they also fit great. I then went to put a set on my Mk25s and the rear sight didn't sit flush to the top of the slide like on the prior 2 installs. So I got a little zealous with a file to make them sit lower. Then they wouldn't stay put in the dove tail; I removed too much material. I ordered a 2nd set and had the same issues. Then I measured my slides and found that my Mk25 slides had a different radius & height when compared to my SCT. So, sometime Sig changed the design of the top of the slide and it appears to coincide with when they cut the rear sight channel all the way across the rear of the slide (like on the SCT) to now with the Mk25 that has a much smaller sight channel cut. As I couldn't afford more tritium rear sights after this learning experience, I bought the standard black (#330) and installed the blank rears with the tritium fronts. I then used an orange paint pen to color the front sight posts. I have now replaced all my Heinie with the new Sig XRay sights. The 'hybrid' sets will come with the tritium rears, if you want to loctite them in place (I did for a while) that seemed to work OK. I'd trust it on a range gun, not on a carry gun though. YMMV IANAL.
Heinie #335 (tritium front & rear) 2014 date code (1 available)
$57 shipped
Heinie #335/#330 hybrid (tritium front & blank rear) 2014 date code (2 available)
$32 shipped per set
2 - P228/P229 Hogue G10 Black/Gray Checkered Grips
$82 shipped
3 - M11A1 Black Slide & P229 locking block : Slide is used and as removed from my recent CPO purchase. I have not fired a round through it, but cannot guestimate round count because I'm not the original owner.
$250 shipped
4 - M11A1 FDE Slide & P229 locking block : Slide is used and as removed from my recent purchase on another message board. I have not fired a round through it, but previous owner documented 2,200+ rounds through it. Barrel is in great condition, there's a little wear on the inside and it's still a little dirty after I wiped it down.
$250 shipped
All prices are shipped via USPS Priority. PayPal is preferred, but I will accept checks (sorry no Money Orders!) and I'm looking for certain trades. I only ship after I've received payment or trade items.
Trades
Glock Trijicon HD sights for G17/G19. Prefer green front (looking for 2 sets)
CMC Flat Trigger (PN 92503)
Sig P226 9mm magazines (15 / 18 / 20 round)
Glock 9mm magazines (Magpul / ETS / Glock only please)
Mk25 barrel
PLEASE PM OR EMAIL ME WHEN POSSIBLE! I MIGHT NOT CHECK THE THREAD ON A REGULAR BASIS.
1 - Heinie night sights. These come with a story...
The first set I put on my 9mm SCT went on great and fit great. I then put a set on my P228 (that's being sold as a kit above) and they also fit great. I then went to put a set on my Mk25s and the rear sight didn't sit flush to the top of the slide like on the prior 2 installs. So I got a little zealous with a file to make them sit lower. Then they wouldn't stay put in the dove tail; I removed too much material. I ordered a 2nd set and had the same issues. Then I measured my slides and found that my Mk25 slides had a different radius & height when compared to my SCT. So, sometime Sig changed the design of the top of the slide and it appears to coincide with when they cut the rear sight channel all the way across the rear of the slide (like on the SCT) to now with the Mk25 that has a much smaller sight channel cut. As I couldn't afford more tritium rear sights after this learning experience, I bought the standard black (#330) and installed the blank rears with the tritium fronts. I then used an orange paint pen to color the front sight posts. I have now replaced all my Heinie with the new Sig XRay sights. The 'hybrid' sets will come with the tritium rears, if you want to loctite them in place (I did for a while) that seemed to work OK. I'd trust it on a range gun, not on a carry gun though. YMMV IANAL.
Heinie #335 (tritium front & rear) 2014 date code (1 available)
$57 shipped
Heinie #335/#330 hybrid (tritium front & blank rear) 2014 date code (2 available)
$32 shipped per set
2 - P228/P229 Hogue G10 Black/Gray Checkered Grips
$82 shipped
3 - M11A1 Black Slide & P229 locking block : Slide is used and as removed from my recent CPO purchase. I have not fired a round through it, but cannot guestimate round count because I'm not the original owner.
$250 shipped
4 - M11A1 FDE Slide & P229 locking block : Slide is used and as removed from my recent purchase on another message board. I have not fired a round through it, but previous owner documented 2,200+ rounds through it. Barrel is in great condition, there's a little wear on the inside and it's still a little dirty after I wiped it down.
$250 shipped
All prices are shipped via USPS Priority. PayPal is preferred, but I will accept checks (sorry no Money Orders!) and I'm looking for certain trades. I only ship after I've received payment or trade items.
Trades
Glock Trijicon HD sights for G17/G19. Prefer green front (looking for 2 sets)
CMC Flat Trigger (PN 92503)
Sig P226 9mm magazines (15 / 18 / 20 round)
Glock 9mm magazines (Magpul / ETS / Glock only please)
Mk25 barrel