bob4432
01-07-17, 19:08
NEW FAXON FIREARMS 4150CMV QPQ 5.56 NATO Mid-Length 16" PENCIL BARREL - $155 Shipped (Lower 48), Discreet PayPal Preferred
http://www.bnkz.com/ARPartsFS/Faxon16Pencil4150001.jpg
http://www.bnkz.com/ARPartsFS/Faxon16Pencil4150002.jpg
Faxon Firearms barrels are the pinnacle of value. Manufactured 100% in-house from cradle-to-grave, these barrels are fully stress releived, air-gauge tested, and 11 degree target crowned to ensure superior accuracy.
Quality is imbuned into our barrels from the start. We start with the best materials, either certified 4150 Mil-Spec steel or 416-R Stainless. From there, each barrel goes through a battery of tests at each operation until finished in Nitride and final inspected. All barrels are individually checked for headspace by precision custom hardened gauges.
Faxon manufactures all our barrels in Cincinnati, Ohio under our ISO:9001 and AS:9100 Quality Certifications.
Barrel Material: 4150 CMV Steel
Barrel Type: Button Rifled
Barrel Caliber: 5.56
Barrel Twist: 1:8
Barrel Length: 16”
Barrel Profile: Pencil
Barrel Gas System: Mid
Inside Finish: QPQ Nitride
Outside Finish: QPQ Nitride
Muzzle Thread: 1/2-28 TPI (Threads Per Inch)
Gas Block Diameter: .625"
Gas Port Diameter: .078"
Gas Block Journal Length: 1.1"
Barrel Extension: M4
Weight: 1.20 lbs
Magnetic Particle Inspected!
11-degree Target Crown
----------
SPIKES TACTICAL MICRO GAS BLOCK (.625) LOW PROFILE - $25 Shipped (Lower 48), Discreet PayPal Preferred
http://www.bnkz.com/ARPartsFS/625SpikesGasBlock001.jpg http://www.bnkz.com/ARPartsFS/625SpikesGasBlock002.jpg
The Spike’s Tactical Low-Profile Gas Block is CNC machined from solid billet steel and a Melonite coating inside and out. Due to its low profile design, our Low-Pro Gas Block will fit under most aftermarket rail systems so you can have a rail longer than your gas system allowing for a longer sight radius when using iron sights and also giving you more room out front to mount your forward grip and/or light for better handling and control.
Our Low-Profile Gas Block mounts securely to your rifle with two stainless steel set screws instead of using a clamp on system that can twist around the barrel and cause the gas flow to be pinched off (we recommend that you have your barrel dimpled when installing this gas block to add even more resistance to twisting). We’ve also designed the front of the gas block to be closed to eliminate gas leakage which can hurt the performance of your rifle and we also include the gas tube roll pin for your convenience.
Features:
- Precision CNC machined from solid billet steel
- Closed front design
- Compact 1” length
- Fits barrels with a .625 barrel diameter at the gas block location
Included:
- Low-Profile Gas Block with stainless steel set screws
- Gas tube roll pin
- Spike's Tactical Lifetime Warranty
----------
Givati Company USA QPQ 5.56 Full Auto BCG, MPI Bolt, $85 Shipped (Lower 48), Discreet PayPal Preferred
http://www.bnkz.com/ARPartsFS/GivatiQPQBCG.jpg
http://www.bnkz.com/ARPartsFS/GivatiQPQBolt.jpg
Features:
8620 Tool Steel Carrier with inside and out Black Nitride Treatment
C158 MPI Bolt with inside and out Black Nitride Treatment
Billet Machined Extractor with Black Insert
Billet Machined 4140 Steel Gas Key
Grade 8 Fasteners
Military Specification Gas Key Staking
ad is cross posted in other forums
Please respond here if you send me a PM as I do not always get a PM notice via email.
*New to selling here but have with both PP & Ebay (kbay79) since 2000 with 100% feedback on Ebay w/ over 1400 transactions and no issues with PP*
http://www.bnkz.com/ARPartsFS/Faxon16Pencil4150001.jpg
http://www.bnkz.com/ARPartsFS/Faxon16Pencil4150002.jpg
Faxon Firearms barrels are the pinnacle of value. Manufactured 100% in-house from cradle-to-grave, these barrels are fully stress releived, air-gauge tested, and 11 degree target crowned to ensure superior accuracy.
Quality is imbuned into our barrels from the start. We start with the best materials, either certified 4150 Mil-Spec steel or 416-R Stainless. From there, each barrel goes through a battery of tests at each operation until finished in Nitride and final inspected. All barrels are individually checked for headspace by precision custom hardened gauges.
Faxon manufactures all our barrels in Cincinnati, Ohio under our ISO:9001 and AS:9100 Quality Certifications.
Barrel Material: 4150 CMV Steel
Barrel Type: Button Rifled
Barrel Caliber: 5.56
Barrel Twist: 1:8
Barrel Length: 16”
Barrel Profile: Pencil
Barrel Gas System: Mid
Inside Finish: QPQ Nitride
Outside Finish: QPQ Nitride
Muzzle Thread: 1/2-28 TPI (Threads Per Inch)
Gas Block Diameter: .625"
Gas Port Diameter: .078"
Gas Block Journal Length: 1.1"
Barrel Extension: M4
Weight: 1.20 lbs
Magnetic Particle Inspected!
11-degree Target Crown
----------
SPIKES TACTICAL MICRO GAS BLOCK (.625) LOW PROFILE - $25 Shipped (Lower 48), Discreet PayPal Preferred
http://www.bnkz.com/ARPartsFS/625SpikesGasBlock001.jpg http://www.bnkz.com/ARPartsFS/625SpikesGasBlock002.jpg
The Spike’s Tactical Low-Profile Gas Block is CNC machined from solid billet steel and a Melonite coating inside and out. Due to its low profile design, our Low-Pro Gas Block will fit under most aftermarket rail systems so you can have a rail longer than your gas system allowing for a longer sight radius when using iron sights and also giving you more room out front to mount your forward grip and/or light for better handling and control.
Our Low-Profile Gas Block mounts securely to your rifle with two stainless steel set screws instead of using a clamp on system that can twist around the barrel and cause the gas flow to be pinched off (we recommend that you have your barrel dimpled when installing this gas block to add even more resistance to twisting). We’ve also designed the front of the gas block to be closed to eliminate gas leakage which can hurt the performance of your rifle and we also include the gas tube roll pin for your convenience.
Features:
- Precision CNC machined from solid billet steel
- Closed front design
- Compact 1” length
- Fits barrels with a .625 barrel diameter at the gas block location
Included:
- Low-Profile Gas Block with stainless steel set screws
- Gas tube roll pin
- Spike's Tactical Lifetime Warranty
----------
Givati Company USA QPQ 5.56 Full Auto BCG, MPI Bolt, $85 Shipped (Lower 48), Discreet PayPal Preferred
http://www.bnkz.com/ARPartsFS/GivatiQPQBCG.jpg
http://www.bnkz.com/ARPartsFS/GivatiQPQBolt.jpg
Features:
8620 Tool Steel Carrier with inside and out Black Nitride Treatment
C158 MPI Bolt with inside and out Black Nitride Treatment
Billet Machined Extractor with Black Insert
Billet Machined 4140 Steel Gas Key
Grade 8 Fasteners
Military Specification Gas Key Staking
ad is cross posted in other forums
Please respond here if you send me a PM as I do not always get a PM notice via email.
*New to selling here but have with both PP & Ebay (kbay79) since 2000 with 100% feedback on Ebay w/ over 1400 transactions and no issues with PP*