vtac rifles

[fasty77]

i see vtac rifles on their website and Noveske's site

does Noveske use his barrels, upper and lower with the vtac forarm?

who's upper and lower does the vtac's use on their site?

i really like the looks of the Noveske/vtac 16 with the stainless barrel

http://noveskerifleworks.com/cgi-bin/imcart/bigpic.cgi?i=r-16-vtac_1d.jpg

https://www.m4carbine.net/attachment.php?attachmentid=1342&stc=1&d=1222190749

does the noveske use the JP fire control (trigger) ?
what options does one have looking at either rifle?

anyone have an example they have shot? do they preform well?

thanks for all your help

[David Thomas]

i see vtac rifles on their website and Noveske's site

does Noveske use his barrels, upper and lower with the vtac forarm? Noveske barrels

who's upper and lower does the vtac's use on their site?

i really like the looks of the Noveske/vtac 16 with the stainless barrel

http://noveskerifleworks.com/cgi-bin/imcart/bigpic.cgi?i=r-16-vtac_1d.jpg

https://www.m4carbine.net/attachment.php?attachmentid=1342&stc=1&d=1222190749

does the noveske use the JP fire control (trigger) ? Not listed as a standard option.

what options does one have looking at either rifle?

anyone have an example they have shot? do they preform well?
Tons of reviews of both the Noveske Recon barrel and the Vtac forend on this site, although there are fewer reviews of the combination

thanks for all your help

See this thread:
https://www.m4carbine.net/showthread.php?t=12899&highlight=VTAC


From Noveske's site:
--16.1" Recon 5.56mm stainless barrel, 1 in 7" twist
--Flat top upper receiver
--12" VTAC free-float handguard
--Extended Feed Ramps
--Beadblasted finish on barrel
--Mid length gas system
--1/2x28 threads
--Shot peened and MP tested bolt
--Properly staked carrier key
--Auto carrier
--Mil-Spec receiver extension, staked
--H Buffer
--Vltor Carbine buttstock
--Tango Down pistol grip
--One 30 rd mag included
--Low-profile gas block pinned to barrel
--Flip-up front and rear sights
--YHM Phantom 5C2 flash suppressor
--2x 2" Rails
--2" Front Sight Rail
--VTAC Light Mount
--Vtac Padded Sling
--1" Swivel


ETA: I have a Noveske Recon with the VLTOR 12" VIS that I purchased prior to the VTAC offering becoming available. I have also had 3 rifles with the VTAC handguard. I have nothing but postive things to say about my Noveske Recon and VTAC handguards, although I have no real experience with the new VTAC handguards as all of the experience I have with the VTAC has been with the older style.

[Olav]

i see vtac rifles on their website and Noveske's site

does Noveske use his barrels, upper and lower with the vtac forarm?

who's upper and lower does the vtac's use on their site?

i really like the looks of the Noveske/vtac 16 with the stainless barrel

http://noveskerifleworks.com/cgi-bin/imcart/bigpic.cgi?i=r-16-vtac_1d.jpg

https://www.m4carbine.net/attachment.php?attachmentid=1342&stc=1&d=1222190749

does the noveske use the JP fire control (trigger) ?
what options does one have looking at either rifle?

anyone have an example they have shot? do they preform well?

thanks for all your help

The uppers/lowers are by CMT for MILSPEC.

I'm getting my info here: Noveske Interview (http://www.defensereview.com/modules.php?name=News&file=article&sid=1167)

I have a 14.5" VTAC upper and it's awesome. I'm shooting timed sub 2MOA at 200yds with it using an Aimpoint CompM4 2MOA sight.

No problems with it at all.

In fact I like it so much I'm getting a 18" SPR with the VTAC hand guard and MUR upper.