View Full Version : A1 Detachable Carry Handle and a 6720 Upper
Since I couldn't buy a full Colt 6720 here in CA I snapped up a 6720 upper when it came across the EE.
I switched twice between Magpul furniture and the original double M4 handguards and stock with both looking wrong to me... Until I dug out an old set of original carbine handguards. I also found an old Eagle(?) A2 grip with storage compartment and everything almost looked right except the Colt A2 handle I had on it still looked bulky...
So a bit of googling came up with the CNC Gunsmithing A1 Detachable Carry handle which turned out to be beautifully machined and almost 4oz lighter than the Colt A2!
http://www.cncguns.com/misc.html
Now it isn't a correct clone of anything but it looks old school lightweight with practical modern touches.
- 6720 Upper
- CNC Gunsmithing A1 Detachable Carry Handle
- Ashley same plane rear sight
- random carbine handguards
- Raptor CH
- Colt RE and M4 Stock
- Eagle A2 grip with storage
- Aero Precision lower
- ALG trigger
- Seekins bolt catch
- Noveske/Magpul 60° ambi safety
- Magpul ASAP plate
- Magpul MOE trigger guard
Light. Looks retro, but with modern touches to keep familiarity with all my other modern AR's.
Dennis. https://uploads.tapatalk-cdn.com/20170407/653e1940da8612b778acf7035aab7ed1.jpg
I want to know more about that carry handle.
It's beautifully machined, light, with Glock polymer knobs, and sooo A1!
However, I had to buy the A1 rear sight parts separately from Fulton Armory.
http://www.cncguns.com/misc.html
Dennis.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Renegade04
04-07-17, 08:56
I have not seen a picture of that carrying handle in several years. They do look good. It is a good alternative to those who do not want a busy-looking A2 carrying handle and prefer the simplicity of the A1 sight.
I've been trying to get some Diemaco A1 carry handles but haven't had any luck.
notorious_ar15
04-07-17, 17:49
That is nice.
Anybody know if I can remove the apertures from my A1 upper and put same plane ones? Cool idea to have a peep and a ghost ring with the same zero. My A1 has two identical peeps with different zeroes (which is handy in its own way I guess.)
Sent from my Pixel using Tapatalk
Yes. The one above has an Ashley same plane aperture in it.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Now that is totally cool. I wish I had known about those carry handles as I would've bought 1 or 2 of those instead of the A2(s).
Very nice gun. Thanks for sharing it here.:cool:
Since I couldn't buy a full Colt 6720 here in CA I snapped up a 6720 upper when it came across the EE.
I switched twice between Magpul furniture and the original double M4 handguards and stock with both looking wrong to me... Until I dug out an old set of original carbine handguards. I also found an old Eagle(?) A2 grip with storage compartment and everything almost looked right except the Colt A2 handle I had on it still looked bulky...
So a bit of googling came up with the CNC Gunsmithing A1 Detachable Carry handle which turned out to be beautifully machined and almost 4oz lighter than the Colt A2!
http://www.cncguns.com/misc.html
Now it isn't a correct clone of anything but it looks old school lightweight with practical modern touches.
- 6720 Upper
- CNC Gunsmithing A1 Detachable Carry Handle
- Ashley same plane rear sight
- random carbine handguards
- Raptor CH
- Colt RE and M4 Stock
- Eagle A2 grip with storage
- Aero Precision lower
- ALG trigger
- Seekins bolt catch
- Noveske/Magpul 60° ambi safety
- Magpul ASAP plate
- Magpul MOE trigger guard
Light. Looks retro, but with modern touches to keep familiarity with all my other modern AR's.
Dennis. https://uploads.tapatalk-cdn.com/20170407/653e1940da8612b778acf7035aab7ed1.jpg
Thanks for posting this information on this A1 detachable carry handle. I ordered one today. I'm going to put it on a Dissipator. If it works out like I think it will then I'm sure I'll buy another for the 6920. :cool:
UPDATE: Got mine in yesterday. IMHO it's very impressive the way he did this. If it turns out to be accurate I might get another. ;)
BrigandTwoFour
05-11-17, 19:09
Well only crap, that's practically exactly what I was wanting for a KISS project. I ended up with a DD 1.5 rear sight, though. May still keep this in mind.
Hammond_Egger
05-31-17, 07:31
That handle is REALLY cool! I like it!
Well only crap, that's practically exactly what I was wanting for a KISS project. I ended up with a DD 1.5 rear sight, though. May still keep this in mind.
Those usually sell well on the EE here. That's where I bought all of mine.
The A1 carry handle is very cool. Much lower profile too.
Metric Matt
06-01-17, 16:48
It's beautifully machined, light, with Glock polymer knobs, and sooo A1!
However, I had to buy the A1 rear sight parts separately from Fulton Armory.
http://www.cncguns.com/misc.html
Dennis.
Sent from my SAMSUNG-SM-G935A using Tapatalk
The A1 sight assembly is also available here :https://www.amherst-depot.com/Gunparts.AR15.htm
I ordered one a few weeks ago, it's NOS parts manufactured in 1974, excellent quality.
I bought one of those cnc guns carry handles a while ago. I thought he stopped making them but yea the quality is very good. I'd recommend one to anyone wanting something basic.
The A1 sight assembly is also available here :https://www.amherst-depot.com/Gunparts.AR15.htm
I ordered one a few weeks ago, it's NOS parts manufactured in 1974, excellent quality.
Thank you for posting this source. Never heard of them and would most likely never have if you had not posted this here. :cool:
Metric Matt
06-01-17, 21:05
Thank you for posting this source. Never heard of them and would most likely never have if you had not posted this here. :cool:
I'm glad I could pass on the info. I looked around online and was having a hard time finding something for a reasonable price. After calling Bushmaster and DPMS, two former known sources, Amherst Depot was recommended to me by the guy at Bushmaster. I wasn't sure what to expect when I ordered it, but was pleasantly surprised to see it was NOS parts still sealed in the package. 45858
45859
I'm glad I could pass on the info. I looked around online and was having a hard time finding something for a reasonable price. After calling Bushmaster and DPMS, two former known sources, Amherst Depot was recommended to me by the guy at Bushmaster. I wasn't sure what to expect when I ordered it, but was pleasantly surprised to see it was NOS parts still sealed in the package. 45858
45859
Yes indeed. I'm going to place an order tomorrow for sure. I'm elated to get NOS Colt rear sight parts. :cool:
Very cool carry handle. I like it, I'm going to have to pick one up.
Necro…
For those who have the CNCGuns A1 detachable carry handle… It seems like it is height for F-marked front sight?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.