View Full Version : Colt taper pins
Did Colt change specs? I have an alleged Colt upper that both taper pins are about 1/8” shallow & not all the way to the smaller end. In other words, they look too short, and the wide head is mangled. It looks like the taper holes wasn’t appropriately reamed & they tried to hammer the pins across?
Pics:51118
Ned Christiansen
03-22-18, 15:14
I've sure never seen that in a Colt. Industry-standard taper pins are very soft but not the ones Colt uses.
I've sure never seen that in a Colt. Industry-standard taper pins are very soft but not the ones Colt uses.
Based on the wide end deformity, I don’t think it’s a Colt pin.
If it is, the hole wasn’t properly reamed & the assembler deformed it trying to hammer it in.
I was lead to believe it was Colt assembled but have since found it wasn’t. The box in the ad said “Authentic Colt Upper Receiver Assembly”
This keeps getting more interesting:
I have genuine Colt taper pins that are 0.846” while the ones I removed are 0.778” which is a 0.068” difference.
I had to ream the holes to install the real Colt pins—anyone else seeing this?
Which seller did you purchase this from on Gunbroker? Seems deceptive.
Looks like Colt is still in it's tailspin towards the bottom of the heap to me. They were good when they were they only game in town and didn't have to be. Competition will kill them. Colt is the next Armalite.. Squeezing as much juice from the prancing horses as possible before putting them out to pasture.
A friend of mine had very bad experience with Colt customer service taking almost a year with a new rifle that fired a shot & wouldn’t work afterwards. I don’t know if this reflects additional “slippage” is indicative of more Colt issues or something else.
Looks like Colt is still in it's tailspin towards the bottom of the heap to me. They were good when they were they only game in town and didn't have to be. Competition will kill them. Colt is the next Armalite.. Squeezing as much juice from the prancing horses as possible before putting them out to pasture.
There's more to this issue than Colt. Reading his other post on the seller, it's unclear if the pins themselves are Colt or if the upper was assembled by the retailer from assorted parts.
bamashooter
03-30-18, 07:19
This dude? https://charliescustomclones.com/products/colt-le6933-11-5-enhanced-commando-complete-upper
Another member here contacted me about the same issue of short taper pins in an alleged Colt barrel.
Tigwelder1971
04-12-18, 19:50
Odd.
I received 2 SOCOM bbls this week, 3/17 date code. Taper pins look like any other I have had. No deformation, completely through the fsb.
?
Tig—can you share or PM where you got them?
Thank you
Tigwelder1971
04-12-18, 20:01
Tig—can you share or PM where you got them?
Thank you
Roger that. Arms Unlimited has them. 14.5" SOCOM for $240 shipped.
:smile:
Tigwelder1971
04-12-18, 20:44
Thank you sir
Anytime.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.