View Full Version : Source for Quality LPK
G&R LPKs are out of stock and I can't get a response from Grant as to when he will have more. I've heard BCM are also good but they are also out. Any one know of another supplier of quality LPKs??
Colt parts from Brownells.
(I assume from your post that your primary concern is quality, not price)
I looked at Brownell's - their LPK is from DPMS.
I looked at Brownell's - their LPK is from DPMS.
You can get Colt OEM parts in the Colt section on their site.
I wouldn't necessarily buy every single LPK component Colt. It'll cost you a fortune.
Daved, I have had good luck with Stag Arms, Armalite and Rock River. You can always add a few Colt or LMT parts.
Semper Fi, Mark
Liquid Rhino
10-22-08, 14:30
Check with Grant. High quality LPK at a nice price.
Right here:
https://www.m4carbine.net/showthread.php?t=18289
Hope this helps :)
EDIT: Oops! Missed that Grant was out of stock in the OP's message. sorry!
Guys,
You've got to avoid getting the Colt FCG pins(if that's the right acronym,) unless you've got a Colt lower...right?
Different sizes....?
You just have to get the right ones. They have both I believe.
karmapolice
10-22-08, 16:06
I say go with Grants (GandR tacticals) lpk its a very nice package and you can cuztomize it which rocks. He is a good duy sells good to go stuff too.
sideshowbob
10-22-08, 19:22
Grant is out. I hope they come back really soon.
what about a WOA one from ADCO? although it doesn't come with trigger+hammer...
thatguy950
10-23-08, 01:40
I've bought WOA barrels before and they are excellent quality, I'm sure their LPKs are too.
Thanks for all the suggestions. Still haven't heard from Grant regarding the availabillity of his kits so I decided to go with a CMT kit from Rainier and have Bill Springfield tune the trigger. If I don't like any of the other major parts, I can replace them later.
How about the Armalite kits? how are their trigger?
I bought an RRA LPK with the 2 stage NM trigger from www.ar15sales.com. Good stuff and at a good price.
CarlosDJackal
10-27-08, 10:20
I bought an LPK last month from Grant that is waiting to get installed onto an SBR'd receiver. From what I can tell, the quality of the parts are excellent. FWIW.
I bought an LPK last month from Grant that is waiting to get installed onto an SBR'd receiver. From what I can tell, the quality of the parts are excellent. FWIW.
Grant's was my first choice - but he has been out stock. There's no info on his forum as to when they will again be available and he hasn't responded to my email request for that info.
I bought a CMT/Stag which generally looks good - parts seem well machined and finish on external parts is even. The only exception is that the mag catch and selector are a dull parkerized finish (like the hammer) as opposed to the blued finish on the other external parts. Are these two parts typically not blued for some reason???
You should read the other AR forum as well...
https://www.m4carbine.net/showthread.php?p=238865#post238865
You should read the other AR forum as well...
https://www.m4carbine.net/showthread.php?p=238865#post238865
Thanks for the info!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.