mgrs
05-25-18, 16:38
For sale are a number of new, or like new takeoff items that could be used for clone builds.
#1- Daniel Defense MK18 RIS rail. This is a take off from a new DD test-fired complete upper. The DD armorers were not very careful- it has three assembly marks in the annodizing but otherwise appears new. Two of the assembly marks are inside the upper rail half and the other is visible as a shiny spot in the photo at the upper right of the lower half. I have added the correct RIS barrel nut wrench and the correct size allen wrench for assembly. $420
https://i.imgur.com/o6mP8vk.jpg
#2- Colt upper receiver. Stamped C, takeoff from a 6920 with approximately 1500 rounds. Includes colt CH. I am not sure if it is a colt CH latch, it may be some type of aftermarket enlarged latch. Sound with typical wear for this round count but no damage. $135
https://i.imgur.com/6K9qcOx.jpg
https://i.imgur.com/OwpqnyB.jpg
#3- DD 10.3 CHF MK18 barrel with pinned gas block and tube; take off from the same test fired DD upper as the rail above. This is a newer DD barrel with confirmed .070 gas port; the correct MK18 port size. These are outstanding hard use barrels and bore scope pictures shows they take abuse much better than Colt or other non-CHF barrels. $220
https://i.imgur.com/WS5ktKs.jpg
https://i.imgur.com/ztqCTSR.jpg
#4- PRI M84 Gas buster charging handle; new in package. This is the correct clone M84 in the NSN package before they started stamping "PRI USA" on them. $85
https://i.imgur.com/PxLPoei.jpg
Paypal and MO are accepted. Prices include CONUS shipping. Thanks
#1- Daniel Defense MK18 RIS rail. This is a take off from a new DD test-fired complete upper. The DD armorers were not very careful- it has three assembly marks in the annodizing but otherwise appears new. Two of the assembly marks are inside the upper rail half and the other is visible as a shiny spot in the photo at the upper right of the lower half. I have added the correct RIS barrel nut wrench and the correct size allen wrench for assembly. $420
https://i.imgur.com/o6mP8vk.jpg
#2- Colt upper receiver. Stamped C, takeoff from a 6920 with approximately 1500 rounds. Includes colt CH. I am not sure if it is a colt CH latch, it may be some type of aftermarket enlarged latch. Sound with typical wear for this round count but no damage. $135
https://i.imgur.com/6K9qcOx.jpg
https://i.imgur.com/OwpqnyB.jpg
#3- DD 10.3 CHF MK18 barrel with pinned gas block and tube; take off from the same test fired DD upper as the rail above. This is a newer DD barrel with confirmed .070 gas port; the correct MK18 port size. These are outstanding hard use barrels and bore scope pictures shows they take abuse much better than Colt or other non-CHF barrels. $220
https://i.imgur.com/WS5ktKs.jpg
https://i.imgur.com/ztqCTSR.jpg
#4- PRI M84 Gas buster charging handle; new in package. This is the correct clone M84 in the NSN package before they started stamping "PRI USA" on them. $85
https://i.imgur.com/PxLPoei.jpg
Paypal and MO are accepted. Prices include CONUS shipping. Thanks