View Full Version : Aimpoint T2 Micro: standard mount ok?
I just got an Aimpoint T2 Micro. I don't have my 10.5 Noveske Upper yet to attach. I have Magpul BUIS Pro. I want 100% co-witness.
Will I get 100% co-witness with the standard mount or do I need a taller mount?
Any other comments?
What do you mean 100%? Options are:
1 Co-witness in middle of optic
2 co-witness in lower third of optic field of view.
My be others, but thats the main choice.
Do tou have a pic of the mount it came with?
You said standard mount? American Defense? If so it is absolute co witness
You said standard mount? American Defense? If so it is absolute co witness
ADM isn’t the standard mount, the Aimpoint LRP is.
Sent from my iPhone using Tapatalk
It is the "Standard Mount". The low one for an AR15.
I want a co-witness with the dot in the center of the optic. I have that on my Aimpoint Pro and my BUIS and I really like it. I normally have the BUIS folded down though.
52298
I have the one from GG&G. I like it.
Sent from my iPhone using Tapatalk
It is the "Standard Mount". The low one for an AR15.
I want a co-witness with the dot in the center of the optic. I have that on my Aimpoint Pro and my BUIS and I really like it. I normally have the BUIS folded down though.
52298
You'll need a taller mount then. Something absolute cowitness height.
You'll need a taller mount then. Something absolute cowitness height.
Ok then.
As long as I'm going to get one then, I want a real nice one.
What is the height I should look for?
What is the best one?
Might as well get one with a nice release latch.
Looking at this:
https://www.larue.com/products/aimpoint-micro-t-2-2moa-m4-qd-mount-combo/
Absolute (LT751)
Provides absolute cowitness with the Iron Sights on M4 Carbine and AR-15 Flattops.
https://www.larue.com/products/larue-tactical-aimpoint-micro-mount-lt751/
thehammer69
06-03-18, 00:14
Ok then.
As long as I'm going to get one then, I want a real nice one.
What is the height I should look for?
What is the best one?
Might as well get one with a nice release latch.
Scalarworks Absolute Co-witness
Scalarworks Absolute Co-witness
http://www.primaryarms.com/scalarworks-leap-micro-t1-t2-mount-absolute-cowitness-sw0100
https://scalarworks.com/shop/optic-mounts/leap-aimpoint-micro-t-2-mount/
The Larue is a good mount. I like the Bobro mounts as well as American Defense.
ADM isn’t the standard mount, the Aimpoint LRP is.
Sent from my iPhone using Tapatalk
mine came with an American defense mount
I have a Scalar Works absolute co-witness mount and highly recommend it. Lightweight, strong and easy to remove and install.
If you have a fixed front sight, I think the 1/3 lower co-witness is a much better choice.
Hammer_Man
06-03-18, 09:52
I have a couple Larue mounts and I like them a lot. They mount up solid and stay put, what more can you ask for?
I have a Scalar Works absolute co-witness mount and highly recommend it. Lightweight, strong and easy to remove and install.
If you have a fixed front sight, I think the 1/3 lower co-witness is a much better choice.
The front sight will be a flip up Magpul BUIS Pro.
I am a huge fan of Scalarworks mounts and one of their Leap micro mounts would be ideal. I also really like the mounts from Midwest Industries: https://www.midwestindustriesinc.com/MI-QD-Mount-for-Aimpoint-T1-and-T2-Co-Witness-p/mi-qdt1-co.htm
I used to run LaRue and ADM mounts exclusively, but have slowly transitioned to MI and Scalarworks mounts for all my red dot sights. The MI mounts have a superior locking mechanism to the one on the ADM and LaRue mounts and the Scalarworks mounts are in a class all their own.
Geisele and Scalarworks are the best.
I’m using 1.93” Geisseles.
Coal Dragger
06-03-18, 16:55
Best non QD and likely most bomb proof on the market: Geissele.
Best QD (no tools needed) Scalarworks LEAP.
Probably can’t go wrong with either.
Thank you all who responded to this thread.
I went to the site and I really like the Scalarworks LEAP.
I think I'm going to order it tomorrow.
Thank You.
mine came with an American defense mount
Quite frankly for the price I like those the best.
Mrgunsngear
06-03-18, 19:25
Scalarworks Absolute Co-witness
FWIW it's $135 shipped at Brownells here (http://bit.ly/2LkUh3J) with code NCS currently
FWIW it's $135 shipped at Brownells here (http://bit.ly/2LkUh3J) with code NCS currently
The code did not work.
I'm going to call them and search for more codes on Monday.
EDIT:
I just called. The code is good for orders of $150 or more!
Thank You!
I'm going to get it!
https://www.m4carbine.net/showthread.php?206959-GDI-MT5-OSM-for-Aimpoint-t1
Just saying
titsonritz
06-04-18, 13:14
Any reason you didn't take advantage of all Memorial Day sales? On that note, Independence Day is 30 days away. Just saying
Defaultmp3
06-04-18, 13:34
Spuhr makes both QD and non-QD Micro mounts these days, probably the way I'd go if cost is no object. I'm personally currently using the GDI QDs, but that's because Spuhr wasn't making Micro mounts back when I bought them.
Selling a GDI for super cheap. Just sayin'.
Any reason you didn't take advantage of all Memorial Day sales? On that note, Independence Day is 30 days away. Just saying
I got the T2 for only $640 after all discounts from eBay on Memorial Day. Killer deal after 15% percent off from eBay and from a reputable dealer. It was negated though because I should not have ordered the one with the mount. It was totally sealed when I got it and not some grey market.
Spuhr makes both QD and non-QD Micro mounts these days, probably the way I'd go if cost is no object. I'm personally currently using the GDI QDs, but that's because Spuhr wasn't making Micro mounts back when I bought them.
That looks nice.
I ordered the Scalarworks and some mags from Brownells. I got $15 off and free shipping.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.