View Full Version : Noveske/ KAC CQB
This is Ezra(Helper): I built this because I wanted a carbine/CQB hybrid. I used my 2 favorite manufactures (Knights Armament/ Noveske) to complete build. This was a build that gave me a lot of headache. It started with receiving the wrong parts and having trouble returning/exchanging them and then I broke a few upper receivers while torqueing URX. But after 60 days of buying parts and waiting, returning/ exchanging wrong parts for right parts, breaking parts and having to wait even longer, I finally got this built. Ezra is 26.15" OAL with stock collapsed and no muzzle devise so I can use a vertical grip if I want.
52622
52625
UPPER:
Noveske Gen 1 upper receiver
Noveske (Pac-Nor) 11.5" S/S barrel w/ KAC E3 Extention
Knights Armament 10.75" URX 4 MLOK
Knights Armament MK11 gas block
Knights Armament 5.56 QCD MAMS
Noveske marked forward assist
Precision Reflex PRI Gas Buster charging handle
Knights Armament E3 bolt carrier group
Knights Armament M4 flip up front sight/ KAC micro 600m rear sight
Lower:
Noveske Gen 1 lower receiver
Novekse marked takedown/pivot pin
Noveske rear QD end plate
LMT buffer tube/castle nut
Knights Armament "H" buffer
A2 pistol grip
Geissele Super Select Fire (SSF SOPMOD) trigger
Knights Armament trigger guard
Knights Armament Ambi safety selector
SB Tactical SBA3 brace
Continental Tool & Die LPK
Accessories:
L3 Insight AN/PEQ-15
Surefire M300 Scout w/ KAC MLOK offset mount
Surefire pressure pad
Haley Strategic D3 multi cam sling
Aimpoint micro T-1 on KAC NVG high rise mount
Knights Armament 5.56 QDC suppressor
Cool build. How did you go about the E3 barrel extension in the Noveske barrel?
Where’s the stock on there?
Nicely done! X2 on the barrel extension question.
Where’s the stock on there?
See his lower specs. Second from bottom.
Cool build. How did you go about the E3 barrel extension in the Noveske barrel?
I removed my E3 barrel extension from my KAC SR15, removed index pin, heliarc pin hole, machine and polish. Remove barrel extension from Noveske barrel (these are screwed on btw). Install E3 extension onto Noveske barrel, with the index pin gone, we only need to align feed ramps. We only needed a .002" shim. Drill new index pin hole in line with gas port, reinstall pin. Check head space and use go-no go tool, we came within .002". I had a guy I have know for a while do the work, he has been manufacturing barrels for a couple of years. He manufactures hydraulic valves and servo actuators for a living. He is the guy helping me on my Reactive Buffer System. We had to make a small modification, the Noveske barrel has a shoulder with a tiny radius, the E3 extension sits flush. So we machined the noveske barrel removing the radius.
Where’s the stock on there?
No stock, just a SB tactical SBA3 brace.
How does it shoot?
haven't shot it yet. actually, haven't shot a gun in almost 4 years, but I will have an opportunity in about 6 months.
I'll give you my FFL's address and can test fire all your stuff for ya. ;)
Are you going to honor your PIF?
Jwknutson17
06-29-18, 08:21
Are you going to honor your PIF?
Prob not. And there are many others wondering the same thing.
what did you request? Did you send me a PM with your name and address?
what did you request? Did you send me a PM with your name and address?
Not me. CoryCop25 and Sig1473. Both claim to have sent multiple PMs which have gone unanswered...
Not me. CoryCop25 and Sig1473. Both claim to have sent multiple PMs which have gone unanswered...
have them PM me. I haven't got anything from them that I see and my inbox is 2 pages long.
haven't shot it yet. actually, haven't shot a gun in almost 4 years, but I will have an opportunity in about 6 months.I'm trying to figure this one out. I would say deployed but based on other threads, possibly not.
Good looking shooter btw. I would ask your thoughts on that brace but I will have probably have bought one and shot with it before you get to shoot it.
How about you take care of your own responsibilities and not make excuses about why you posted PIFs only to vanish when people claimed them?
P
have them PM me. I haven't got anything from them that I see and my inbox is 2 pages long.
How about you take care of your own responsibilities and not make excuses about why you posted PIFs only to vanish when people claimed them?P
you mentioned both members by name and claimed they sent multiple messages, I figured you were friends. If you have an issue with me, PM me directly, don't hijack my thread. I am on this forum almost every day. If someone made a claim, they need to PM me with a name and address.
Then I guess you would have seen these...
https://www.m4carbine.net/showthread.php?20223-gt-OFFICIAL-lt-quot-PAY-IT-FORWARD-quot&p=2635408#post2635408
I'm trying to figure this one out. I would say deployed but based on other threads, possibly not.
Its a rather long story.
You literally just got through saying that your inbox is out of control. Several people are reporting that you are unresponsive via PM. Why would you not just contact them?
you mentioned both members by name and claimed they sent multiple messages, I figured you were friends. If you have an issue with me, PM me directly, don't hijack my thread. I am on this forum almost every day. If someone made a claim, they need to PM me with a name and address.
You literally just got through saying that your inbox is out of control. Several people are reporting that you are unresponsive via PM. Why would you not just contact them?
get off my thread! are you 12 years old? Troll?
get off my thread! are you 12 years old? Troll?
Not a troll, just trying to get you to acknowledge and honor your commitments. And for the record, you don't "own" a thread.
This is Ezra(Helper): I built this because I wanted a carbine/CQB hybrid. I used my 2 favorite manufactures (Knights Armament/ Noveske) to complete build. This was a build that gave me a lot of headache. It started with receiving the wrong parts and having trouble returning/exchanging them and then I broke a few upper receivers while torqueing URX. But after 60 days of buying parts and waiting, returning/ exchanging wrong parts for right parts, breaking parts and having to wait even longer, I finally got this built. Ezra is 26.15" OAL with stock collapsed and no muzzle devise so I can use a vertical grip if I want.
52622
52625
Lower:
Noveske Gen 1 lower receiver
Novekse marked takedown/pivot pin
Noveske rear QD end plate
LMT buffer tube/castle nut
Knights Armament "H" buffer
A2 pistol grip
Geissele Super Select Fire (SSF SOPMOD) trigger
Knights Armament trigger guard
Knights Armament Ambi safety selector
SB Tactical SBA3 brace
Continental Tool & Die LPK
What am I missing here?
What am I missing here?
https://geissele.com/super-select-fire-ssfr-trigger.html
This gun is NOT select fire or capable of firing anything other than single fire.
To be honest, the trigger and hammer doesn't do anything if you don't have a selector that can disengage the disconnect and of coarse a sear. But none of the commercially available lower receivers have the same internal dimensions to allow a sear to be installed anyway, plus my KAC selector only has 2 positions: safe and fire. I got this used from my class III dealer in Dallas who works on a lot of LE firearms. The owner had bought a dozen out of speculation and I think who ever he intended to buy them, went a different direction. I paid $250 which is about the price of a new Geissele.
Geissele actually points out that this trigger will not allow, modify, manipulate or otherwise render a non select fire firearm from firing fully automatic. They also say that this particular trigger will not work in a non select fire weapon. It does, however its a $440 single fire trigger.
Well, I got to shoot this rifle over the weekend. Shot it suppressed. I shot it off the side of an old county road, I was aiming for a snake, missed it by about 6 inches and ended up shooting a hole in the bottom of my Porsche. Its a long story, but the gun shot great, felt great, not a lot of recoil but does have a little kick.
53083
TexasAggie2005
07-26-18, 08:04
Well, I got to shoot this rifle over the weekend. Shot it suppressed. I shot it off the side of an old county road, I was aiming for a snake, missed it by about 6 inches and ended up shooting a hole in the bottom of my Porsche. Its a long story, but the gun shot great, felt great, not a lot of recoil but does have a little kick.
53083
All the fails...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.