CDR_Glock
08-23-18, 07:36
My buddy was moving away and he left me a lot of stuff.
I was rummaging through everything when I saw a Glock Tupperware Box marked “Parts only”.
When I opened the big box and saw the Tupperware, I was thinking it had like a trigger/trigger bar, Connector, Guide rod and maybe some spare slide stops. Then I see a slide, a receiver, barrel mag release and virtually everything else and I thought, This is a nearly complete gun in pieces!!
The whole time I thought Whiskey Tango Foxtrot! Hotel Delta! The slide was pristine but the grip looked like someone buried it in clay. Hahahaha
https://uploads.tapatalk-cdn.com/20180823/5da6232868b0b287d4d58730f0ebf27f.jpg
I proceeded to clean it up and assemble everything and it had almost all of the parts. My friend, an armorer, took a look at everything and said for me to clean each part thoroughly.
Turns out a broken Mag Release Spring was stuck in the channel. It was discovered after removing years of funk and debris.
https://uploads.tapatalk-cdn.com/20180823/08b112fcbd01461e1741578a1380e906.jpg
I proceeded to use a pick and the thinnest needle nosed pliers I had, and Voila! Put it came.https://uploads.tapatalk-cdn.com/20180823/be5554f7f356963cd6cf83a97d6f6b9e.jpg
Needless to say, I installed everything back in. I tested its function and test fired it.
Worked like a charm.
It needs new sights, and probably a new barrel.https://uploads.tapatalk-cdn.com/20180823/0f5aef170da555ace47e7883d9f420fa.jpg
But my box of ammo went through without a hitch.
All I replaced were the connector, slide lock and rear plate, in addition to the Mag release spring.
Instagram : MuzzleblastMD
I posted the maiden voyage on my backyard range in Instagram. Definitely worked and it was on target. I was hitting my IDPA steel, Dueling tree and Arntzen 12 inch steel. I tried to make it fail by shooting some doubles and it ran like a charm.
Sent from my iPad using Tapatalk Pro
I was rummaging through everything when I saw a Glock Tupperware Box marked “Parts only”.
When I opened the big box and saw the Tupperware, I was thinking it had like a trigger/trigger bar, Connector, Guide rod and maybe some spare slide stops. Then I see a slide, a receiver, barrel mag release and virtually everything else and I thought, This is a nearly complete gun in pieces!!
The whole time I thought Whiskey Tango Foxtrot! Hotel Delta! The slide was pristine but the grip looked like someone buried it in clay. Hahahaha
https://uploads.tapatalk-cdn.com/20180823/5da6232868b0b287d4d58730f0ebf27f.jpg
I proceeded to clean it up and assemble everything and it had almost all of the parts. My friend, an armorer, took a look at everything and said for me to clean each part thoroughly.
Turns out a broken Mag Release Spring was stuck in the channel. It was discovered after removing years of funk and debris.
https://uploads.tapatalk-cdn.com/20180823/08b112fcbd01461e1741578a1380e906.jpg
I proceeded to use a pick and the thinnest needle nosed pliers I had, and Voila! Put it came.https://uploads.tapatalk-cdn.com/20180823/be5554f7f356963cd6cf83a97d6f6b9e.jpg
Needless to say, I installed everything back in. I tested its function and test fired it.
Worked like a charm.
It needs new sights, and probably a new barrel.https://uploads.tapatalk-cdn.com/20180823/0f5aef170da555ace47e7883d9f420fa.jpg
But my box of ammo went through without a hitch.
All I replaced were the connector, slide lock and rear plate, in addition to the Mag release spring.
Instagram : MuzzleblastMD
I posted the maiden voyage on my backyard range in Instagram. Definitely worked and it was on target. I was hitting my IDPA steel, Dueling tree and Arntzen 12 inch steel. I tried to make it fail by shooting some doubles and it ran like a charm.
Sent from my iPad using Tapatalk Pro