Mrgunsngear
01-12-19, 09:23
https://i.imgur.com/A72FQSvl.jpg
Most of what I'll put below is in the video but since I know most won't watch all of it here goes:
I put 5k rounds through a VSKA that Century sent for the test. They didn't set any testing parameters for the test; that was my call. I decided to not kill it and just fired 150 rounds at a time, let it cool, then ran another 150. Repeat until all ammo was expended. The test was done over the course of 2 days.
I should have the raw shooting footage edited/rendered/uploaded on the B channel either this weekend or next week.
I think a lot of folks will focus on what I say at the end about the front trunnion and the wear/chip so I actually cleaned it with solvent (CLP was used throughout the test) and took some photos of it which you can see below and make your own assessment.
https://i.imgur.com/9RPi1SPl.jpg
https://www.youtube.com/watch?v=74Dugq_-ZMY
Most of what I'll put below is in the video but since I know most won't watch all of it here goes:
I put 5k rounds through a VSKA that Century sent for the test. They didn't set any testing parameters for the test; that was my call. I decided to not kill it and just fired 150 rounds at a time, let it cool, then ran another 150. Repeat until all ammo was expended. The test was done over the course of 2 days.
I should have the raw shooting footage edited/rendered/uploaded on the B channel either this weekend or next week.
I think a lot of folks will focus on what I say at the end about the front trunnion and the wear/chip so I actually cleaned it with solvent (CLP was used throughout the test) and took some photos of it which you can see below and make your own assessment.
https://i.imgur.com/9RPi1SPl.jpg
https://www.youtube.com/watch?v=74Dugq_-ZMY