View Full Version : MRE 2002 Delta Force build
Upper is a Colt Alcoa with a SOCOM barrel and KAC Triple Tap. On the rail, there is a gangster grip I made using a cheap 30mm scope ring and spacer threaded for the standard grip screw. I'm using a Surefire 6p for the light, KAC mini 2-600m rear, standard Colt charging handle and Colt BCG. Optic is a Eotech 551 on a Larue LT101 5/8 riser. The lower is a 2017 "M4A1 Carbine" marked Colt lower with stock trigger, CQD mount, H2 buffer, Colt N1 stock, and butt pad. Very smooth shooter with the Triple tap and runs like a sewing machine. One of my favorite setups so far. Got a KAC qd mount for the stock and a Redi mag on the way for it. I'll probably skip the peq 2 since I'll just put one of my peq 15s or dbal on there if I need it.https://uploads.tapatalk-cdn.com/20190412/318f1fdf17f990c080a097057d13c948.jpg
Sent from my SM-G955U using Tapatalk
Hammer_Man
04-16-19, 11:58
Very nicely done. I had a similar set up for a while (SOCOM barrel with MRE rail), but decided to ditch the MRE handguard due to how nose heavy my carbine felt. I do like the looks of it, but too heavy for me.
Very nicely done. I had a similar set up for a while (SOCOM barrel with MRE rail), but decided to ditch the MRE handguard due to how nose heavy my carbine felt. I do like the looks of it, but too heavy for me.Added a few things. Waiting on a DLOC PVS-14 mount to put behind the Eotech.https://uploads.tapatalk-cdn.com/20190416/23c6bba1a2193aeb5a860c56345d36ec.jpg
Sent from my SM-G955U using Tapatalk
WTB PEQ 2. Coming along nicely though. Going pig hunting tomorrow night.https://uploads.tapatalk-cdn.com/20190419/623807466076fc614c723807d246134b.jpg
Sent from my SM-G955U using Tapatalk
ramairthree
04-19-19, 04:23
A.R.M.S. Rear sight?
Would it have been AA vs 123 EoTech battery then?
A.R.M.S. Rear sight?
Would it have been AA vs 123 EoTech battery then?I'm using a kac micro 2-600m rear and Eotech 551 which uses N cell batteries
Sent from my SM-G955U using Tapatalk
Hammer_Man
04-22-19, 15:57
You sir have some pretty sweet builds! Your attention to detail is on point.
Hammered_Pair
04-22-19, 21:24
Like the way that gun looks, I'm a huge fan of the old N1 stocks.
PEQ 2 and stock qd sling mount arrived to finish the buildhttps://uploads.tapatalk-cdn.com/20190505/547216409fcd7cfa418cd439fe0c82d2.jpg
Sent from my SM-G955U using Tapatalk
100%! That is a great build! Great job on the gangster grip! Those sell for $400 on Ebay. Your looks legit!
100%! That is a great build! Great job on the gangster grip! Those sell for $400 on Ebay. Your looks legit!Thanks a lot! The hardest part for me was shaving down the spacer for the flashlight to fit properly. It's even held up to full auto!
https://www.instagram.com/p/ByDwS8-AUv9/?igshid=13c6p6358x4nc
Sent from my SM-G955U using Tapatalk
Diamondback
05-29-19, 23:15
Damn, man... I wanna come play in YOUR toybox. :) If you're ever up for sharing leads on where you find some of your more exotic/unusual parts for builds, I have a BCM-based C8 SFW clone in progress I could use some ideas on...
Damn, man... I wanna come play in YOUR toybox. :) If you're ever up for sharing leads on where you find some of your more exotic/unusual parts for builds, I have a BCM-based C8 SFW clone in progress I could use some ideas on...If you have Instagram, I've gotten a lot of parts there from reputable people
Sent from my SM-G955U using Tapatalk
Diamondback
05-29-19, 23:44
If you have Instagram, I've gotten a lot of parts there from reputable people
Sent from my SM-G955U using Tapatalk
I avoid social media like the plague, admittedly a somewhat ironic choice since I'm allegedly in "the wired generation." Thanks, though.
Boba Fett v2
05-31-19, 11:25
Upper is a Colt Alcoa with a SOCOM barrel and KAC Triple Tap. On the rail, there is a gangster grip I made using a cheap 30mm scope ring and spacer threaded for the standard grip screw. I'm using a Surefire 6p for the light, KAC mini 2-600m rear, standard Colt charging handle and Colt BCG. Optic is a Eotech 551 on a Larue LT101 5/8 riser. The lower is a 2017 "M4A1 Carbine" marked Colt lower with stock trigger, CQD mount, H2 buffer, Colt N1 stock, and butt pad. Very smooth shooter with the Triple tap and runs like a sewing machine. One of my favorite setups so far. Got a KAC qd mount for the stock and a Redi mag on the way for it. I'll probably skip the peq 2 since I'll just put one of my peq 15s or dbal on there if I need it.https://uploads.tapatalk-cdn.com/20190412/318f1fdf17f990c080a097057d13c948.jpg
Sent from my SM-G955U using Tapatalk
Love this.
https://uploads.tapatalk-cdn.com/20190412/318f1fdf17f990c080a097057d13c948.jpg
I keep coming back to this thread. I decided to build one with the exception of a few items which are hard to find.
So far I have ( Most was in my inventory):
KAC MRE rail,
Colt SOCOM M4 barrel,
Colt SOCOM III upper receiver,
USM4 lower but might go with an older Colt lower
KAC micro rear flip up sight
LMT buffer tube
Colt N1 stock
Larue 5/8 riser
Eotech 556 A65 (not correct but close enough)
Colt equivalent BCG
PRI C/H
You can forget about the KAC triple tap, they were $450 years ago, now they are discontinued, im trying to decide a suitable replacement. Gangster grip is going to be an issue, I don't want a clone or build my own, if I could get a legit KAC gangster grip with 6P I would in a blink of an eye but these are getting harder to find.PEQ-2 I already have on a 100% correct MK18 MOD 0, so I may opt to not have a designator. Cant decide.
You have inspired me!
I keep coming back to this thread. I decided to build one with the exception of a few items which are hard to find.
So far I have ( Most was in my inventory):
KAC MRE rail,
Colt SOCOM M4 barrel,
Colt SOCOM III upper receiver,
USM4 lower but might go with an older Colt lower
KAC micro rear flip up sight
LMT buffer tube
Colt N1 stock
Larue 5/8 riser
Eotech 556 A65 (not correct but close enough)
Colt equivalent BCG
PRI C/H
You can forget about the KAC triple tap, they were $450 years ago, now they are discontinued, im trying to decide a suitable replacement. Gangster grip is going to be an issue, I don't want a clone or build my own, if I could get a legit KAC gangster grip with 6P I would in a blink of an eye but these are getting harder to find.PEQ-2 I already have on a 100% correct MK18 MOD 0, so I may opt to not have a designator. Cant decide.
You have inspired me!Thanks for the kind words! Here is my current configuration!https://uploads.tapatalk-cdn.com/20190827/1dd357764bb3764951da82168fbf5ec4.jpg
Sent from my SM-G955U using Tapatalk
Update: flush Gangster grip, Harris w/ podlock and KAC mount, NT4QDSS, lo-pro peq mount, insight m6x vis
Took this out from 300-700 yards today. I only missed twice on human sized silhouettes after adjusting for wind. I shot it full auto before and after. The Colt Socom barrel has me impressed. I never cleaned it for the whole year it was in jail and many conjugal visits. This is my favorite build.https://uploads.tapatalk-cdn.com/20200116/ad7fcf0ec5bbb05620172ec81abc3246.jpghttps://uploads.tapatalk-cdn.com/20200116/a44a9695ec1de9484798b4f5125af3a6.jpg
Sent from my SM-G955U using Tapatalk
Full auto vid
http://cloud.tapatalk.com/s/5e1fd8e763cb8/InShot_20200114_154132812.mp4
Sent from my SM-G955U using Tapatalk
Pic with the NT4https://uploads.tapatalk-cdn.com/20200119/d06e0e715d3516a52739b014f02a2049.jpg
Sent from my SM-G955U using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.