PDA

View Full Version : Midwest Industries 10/22 Takedown M-LOK Handguard



Midwest Industries
06-17-19, 13:54
Ruger 10/22 Takedown M-LOK handguards are now shipping.
We have a length for both rifles as well as the chargers.
Be sure to check out the links below for more information.


https://i1185.photobucket.com/albums/z349/Midwest_Ind/B6C43195-85EF-4289-807F-18BBA808375D_zpstcpzukre.png

https://www.midwestindustriesinc.com/MI-Ruger-1022-13-0-M-Lok-Handguard-p/mi-1022-13h.htm

https://www.midwestindustriesinc.com/MI-Ruger-1022-8-0-M-Lok-Handguard-p/mi-1022-8h.htm

Diamondback
08-24-19, 23:14
Was just about to fire off an email to Andy with a couple questions, but since you have a thread here I'll give you a free bump and hope I can help anybody else who might be thinking along similar lines to myself.

1. Is there an M-Lok slot on top, and if so could it be set up to align with a receiver-top rail for mounting AR-style longer-radius iron sights? (I'm thinking to use the Brownells integral-rail model.)

2. Is it compatible with the Lasermax barrel-band laser unit?

Thanks!

Midwest Industries
08-25-19, 08:45
The top of the hand guard has m lok slots . We do not have a pic rail that extends from the hand guard over the receiver. This would not work since the gun has to twist to make it a take down. As far as the laser sight we have zero experience with that particular part .
Thanks
Troy
MI

Diamondback
08-25-19, 13:38
Troy, I was thinking more "would the included rail section, mounted on the top slot, be the right height above bore to match a receiver-mounted scope rail?" One of the things I hate about the "as built" design is that the rear sight is halfway down the rifle from your eyeball.

Thank you!

Midwest Industries
08-25-19, 14:44
We use the included rail section to mount red dots and it works really well. I am sure you could mount a longer rail section for a scope but I am not sure you would get the proper eye relief .

Troy
MI

ALCOAR
08-25-19, 15:18
That's cool as hell.

Diamondback
08-25-19, 18:16
We use the included rail section to mount red dots and it works really well. I am sure you could mount a longer rail section for a scope but I am not sure you would get the proper eye relief .

Troy, when I say "scope rail" like your 1022SM, I'm only referring to the usual use for 'em--my thinking is to mount a front iron sight at the front of the handguard and a rear on the back of the receiver, like an AR BUIS system. (I really hate standard 10/22 and AK setups where the rear sight is halfway down the rifle's length from your eye.)

Midwest Industries
08-25-19, 19:08
We would have to make the rails match in height. As of right now we do not have a receiver rail and hand guard rail that are the same height.

Troy
MI