ndmiller
07-15-19, 18:02
Bought this setup to finally take a rifle class years ago and ran out of bandwith. After putting together sat unused in closet. Retail for all ~$425, asking $300-->$275-->$250 PayPal G&S, no trades, not breaking up set at this time. Will ship USPS priority flat rate box, usually 1-3 days CONUS. First "I'll take it" in inbox gets the setup. Will answer back with PayPal information.
(1) Shellback Tactical Banshee Rifle Plate Carrier - MultiCam
(2) HSGI X2R TACO Double Rifle Magazine Pouch - MultiCam
(2) HSGI Double Decker "TACO" Magazine Pouch - MultiCam
(1) Maxpedition Rollypoly - Khaki
(2) Short Malice Clips Coyote
The BANSHEE Rifle Plate Carrier was designed to meet and exceed the needs of the operator. If you are an Operator, Military and Law Enforcement alike who needs a high quality carrier that has great load carrying capacity in a compact lightweight design the BANSHEE is for you. The Shoulders on the BANSHEE rifle plate carrier are fully adjustable and padded with a new advanced design feature not seen in other rigs. The shoulder areas once adjusted slides into itself and locks in securely with a hidden quick release buckle. On the shoulders are 2 rows of PALS webbing with elastic nylon sewn in between the PALS webbing allowing for comms or hydration tubing to be ran through.
The front and back of the BANSHEE feature 5 rows of PALS webbing and two 2 inch rows of Loop sewn on for flags and other identifiers. The front and back of the panels of the carrier on the body side are also padded. Rifle plates are loaded from the bottom front/back and secured with a hook/loop closure.
The BANSHEE rifle plate carrier includes a removable cummerbund. The Cummerbund runs through the rig, is fully adjustable (one size fits most) and has PALS webbing. If the Cummerbund if not needed it can also be removed, and the rig can continue to be secured by a secondary nylon strap system with quick release buckles (also removable). The front pocket of the Carrier has a hook and loop kangaroo type pocket to allow for accessories.
NEWS- The Banshee Rifle Plate Carrier is now L.A.P.D. Approved for use by officers. It is on the Approved Gear list for the Los Angeles Police Department (L.A.P.D.)
Gear shown on BANSHEE for demo only and not included with carrier. Side Plate Pockets shown in pictures not included.
Features:
Extreme versatility with several PALS web attachment points covering the front,
back and shoulders of the vest.
Fully adjustable and padded front, back and shoulder areas.
Two area of loop for identifiers
Fits over soft body armor/Uniforms
Heavy Duty bar tacking at key stress points
Wire, antenna or hydration hose guides
Removable Cummerbund with interior and exterior PALS for side plates-NEW
Low Profile/ Lightweight
Quick Release Buckle secondary securing system
500 Cordura
Drag Handle- NEW
Lifetime Warranty
Dimensions of the Cummerbund each side that accepts soft armor: 17" x 6"
Weight of the BANSHEE empty: 2lbs 10 oz
Will accept up to 10x12 Level 3 and 4 ESAPI OR SIMILAR PLATES and Plate
Backers. Currently, the pockets will not accept the XL ESAPI plates.
Now approved with the Los Angeles Police Department (L.A.P.D.)
Made in the USA
HSGI X2R TACO Double Rifle Magazine Pouch
The Next Evolution in HSGI's extremely popular TACO series of Pouches. Like the original TACO will handle any type of Rifle Magazines thrown at it. Able to carry 2 Magazines in a single Pouch eliminates the need for double stacking TACO's. The pouch is one piece of 4 layer laminated Cordura with 2 Plastic Brackets which are separated by a HDPE sheet. The HDPE sheet has a 1" webbing sewn on it which adds a bungee loop at the top for over the top bungee retention. Made of Cordura, Polymer, and shock-cord. It is silent when stuck against and while extracting the mag.
The "X2R TACO" maintains a positive grip on the mags, which is adjustable and does not need any other use of a securing system unless desired upon by user preference. Webbing tabs are sewn in on the top of the Cordura and HDPE separator for use of "over the top" bungee retainers if desired (not included). Additional loop velcro is sewn in the inside if the user wishes to use adhesive backed hook velcro on his magazine body for added security.
Covered by HSGI's Lifetime Warranty. Made in the USA. HSG Clips Included.
HSGI Double Decker "TACO" Magazine Pouch
Double Decker "TACO" , Modular single rifle and pistol magazine pouch. Just like its older brother this unique pouch will hold more types of mags than just the AR series of mags. Not only will it hold AR type mags including P-MAGS, it will also hold Magazines for the AK, FAL, M14, SR25, M1A1, G3, Saiga 12, and more..... even some types of radios. It will also hold the large Flash bangs and the M-18 Smoke grenades. This mag pouch measures 3" in width. Made of Cordura, Kydex and shock-cord, it is silent when stuck against and while extracting the mag.
The "TACO" maintains a positive grip of the mag on which is adjustable and does not need use of any other securing systems unless desired upon by user preference. Webbing tabs are sewn in on the top for use of "over the top" bungee retainers if desired (not included). Additional loop Velcro is sewn in the inside of the Rifle pouch if the user wishes to use adhesive backed hook Velcro on his magazine body for added security. But not only will this pouch hold ANY Rifle magazine, it will hold ANY Pistol Magazine. Single Stack or Double Stack. Made in the USA and is covered by the HSGI Lifetime warranty.
(1) Shellback Tactical Banshee Rifle Plate Carrier - MultiCam
(2) HSGI X2R TACO Double Rifle Magazine Pouch - MultiCam
(2) HSGI Double Decker "TACO" Magazine Pouch - MultiCam
(1) Maxpedition Rollypoly - Khaki
(2) Short Malice Clips Coyote
The BANSHEE Rifle Plate Carrier was designed to meet and exceed the needs of the operator. If you are an Operator, Military and Law Enforcement alike who needs a high quality carrier that has great load carrying capacity in a compact lightweight design the BANSHEE is for you. The Shoulders on the BANSHEE rifle plate carrier are fully adjustable and padded with a new advanced design feature not seen in other rigs. The shoulder areas once adjusted slides into itself and locks in securely with a hidden quick release buckle. On the shoulders are 2 rows of PALS webbing with elastic nylon sewn in between the PALS webbing allowing for comms or hydration tubing to be ran through.
The front and back of the BANSHEE feature 5 rows of PALS webbing and two 2 inch rows of Loop sewn on for flags and other identifiers. The front and back of the panels of the carrier on the body side are also padded. Rifle plates are loaded from the bottom front/back and secured with a hook/loop closure.
The BANSHEE rifle plate carrier includes a removable cummerbund. The Cummerbund runs through the rig, is fully adjustable (one size fits most) and has PALS webbing. If the Cummerbund if not needed it can also be removed, and the rig can continue to be secured by a secondary nylon strap system with quick release buckles (also removable). The front pocket of the Carrier has a hook and loop kangaroo type pocket to allow for accessories.
NEWS- The Banshee Rifle Plate Carrier is now L.A.P.D. Approved for use by officers. It is on the Approved Gear list for the Los Angeles Police Department (L.A.P.D.)
Gear shown on BANSHEE for demo only and not included with carrier. Side Plate Pockets shown in pictures not included.
Features:
Extreme versatility with several PALS web attachment points covering the front,
back and shoulders of the vest.
Fully adjustable and padded front, back and shoulder areas.
Two area of loop for identifiers
Fits over soft body armor/Uniforms
Heavy Duty bar tacking at key stress points
Wire, antenna or hydration hose guides
Removable Cummerbund with interior and exterior PALS for side plates-NEW
Low Profile/ Lightweight
Quick Release Buckle secondary securing system
500 Cordura
Drag Handle- NEW
Lifetime Warranty
Dimensions of the Cummerbund each side that accepts soft armor: 17" x 6"
Weight of the BANSHEE empty: 2lbs 10 oz
Will accept up to 10x12 Level 3 and 4 ESAPI OR SIMILAR PLATES and Plate
Backers. Currently, the pockets will not accept the XL ESAPI plates.
Now approved with the Los Angeles Police Department (L.A.P.D.)
Made in the USA
HSGI X2R TACO Double Rifle Magazine Pouch
The Next Evolution in HSGI's extremely popular TACO series of Pouches. Like the original TACO will handle any type of Rifle Magazines thrown at it. Able to carry 2 Magazines in a single Pouch eliminates the need for double stacking TACO's. The pouch is one piece of 4 layer laminated Cordura with 2 Plastic Brackets which are separated by a HDPE sheet. The HDPE sheet has a 1" webbing sewn on it which adds a bungee loop at the top for over the top bungee retention. Made of Cordura, Polymer, and shock-cord. It is silent when stuck against and while extracting the mag.
The "X2R TACO" maintains a positive grip on the mags, which is adjustable and does not need any other use of a securing system unless desired upon by user preference. Webbing tabs are sewn in on the top of the Cordura and HDPE separator for use of "over the top" bungee retainers if desired (not included). Additional loop velcro is sewn in the inside if the user wishes to use adhesive backed hook velcro on his magazine body for added security.
Covered by HSGI's Lifetime Warranty. Made in the USA. HSG Clips Included.
HSGI Double Decker "TACO" Magazine Pouch
Double Decker "TACO" , Modular single rifle and pistol magazine pouch. Just like its older brother this unique pouch will hold more types of mags than just the AR series of mags. Not only will it hold AR type mags including P-MAGS, it will also hold Magazines for the AK, FAL, M14, SR25, M1A1, G3, Saiga 12, and more..... even some types of radios. It will also hold the large Flash bangs and the M-18 Smoke grenades. This mag pouch measures 3" in width. Made of Cordura, Kydex and shock-cord, it is silent when stuck against and while extracting the mag.
The "TACO" maintains a positive grip of the mag on which is adjustable and does not need use of any other securing systems unless desired upon by user preference. Webbing tabs are sewn in on the top for use of "over the top" bungee retainers if desired (not included). Additional loop Velcro is sewn in the inside of the Rifle pouch if the user wishes to use adhesive backed hook Velcro on his magazine body for added security. But not only will this pouch hold ANY Rifle magazine, it will hold ANY Pistol Magazine. Single Stack or Double Stack. Made in the USA and is covered by the HSGI Lifetime warranty.