First 11.5 “build”

[Kenneth]

Only AR I had was a build on a 14.5 I did when the Obama scare happened and since then I have gotten wiser and researched more. Anyway here is the new build.
Upper:
Rosco 11.5 barrel
SLR sentry 7
Dead air brake
Lantac EBCG (until my LMT comes in)
ADM upper
SLR 10.7 ion light rail
Geissele BUIS
Geissele 1/3 T1 mount
Holosun
SiCo Omega

Lower:
ADM lower
Geissele SD-E
BCM grip
Vltor A5 W A5H2
Sprinco Green
SBA3 (until stamp comes in)
Geissele safety and small parts

Still waiting on a MLOK light bar from T-Rex arms and a light of some sort.

https://uploads.tapatalk-cdn.com/20200121/e29cca2c27382da0d576da6d26d359c2.jpg

https://uploads.tapatalk-cdn.com/20200121/1c77ae869879e9c0a5525ba5d183c6b0.jpg

Haven’t got to pull the trigger yet but might go tomoorw. Suppressor wrap will come off just had it on from the bolt gun.




Sent from my iPhone using Tapatalk

[Pappabear]

Got some nice parts, should be a shooter. Have you dumped ammo yet? Range report ?

PB

[Pappabear]

double post

[everready73]

Throw up a range report if you get s chance

Sage Dynamics did a review of the Roscoe barrel and it was very positive. They seem to be accurate and priced right.

[Kenneth]

Throw up a range report if you get s chance

Sage Dynamics did a review of the Roscoe barrel and it was very positive. They seem to be accurate and priced right.

I was going to go with the Sionics reduced gas port but the rosco was half the price. Since it will mostly be ran in short range classes I didn’t mind a cheaper barrel. We’ll see how it goes.

Ammo will be 25 grains of H335 loaded with a bulk 55 on my 650. Mixed brass.


Sent from my iPhone using Tapatalk

[gaijin]

Thought VFG on a "pistol" was no go.

[georgeib]

Thought VFG on a "pistol" was no go.You're correct. The emphasis is on the "V" in VFG here though. As the BCM grip isn't exactly vertical, it's not actually a VFG, but an angled fore grip.

[gaijin]

(:

Good luck with that- "3 degrees off VFG".

[MistWolf]

Thought VFG on a "pistol" was no go.

You can put a vertical foregrip on a pistol that has an OAL of 26 inches or more. If I recall, an AR with an 11.5 inch barrel and carbine RE comes in right at 26 inches. The A5 wil put an 11.5 inch AR over 26 inches, easy.

[Kenneth]

You can put a vertical foregrip on a pistol that has an OAL of 26 inches or more. If I recall, an AR with an 11.5 inch barrel and carbine RE comes in right at 26 inches. The A5 wil put an 11.5 inch AR over 26 inches, easy.

This.

I’ll get an exact measurement today for you guys.


Sent from my iPhone using Tapatalk

[fedupflyer]

Might as well get rid of that suppressor cover.
I have one similar that Silcerco sold.
About 60 rnds into a outlaw match on a 300 BO, it came flying off.

[benthughes]

I have a similar build with a Wilson 11.1” barrel and VLTOR A5. Will the regular A5 work with that pistol brace or do you need a pistol extension?

[scooter22]

I have a similar build with a Wilson 11.1” barrel and VLTOR A5. Will the regular A5 work with that pistol brace or do you need a pistol extension?

You need an A5 receiver extension/buffer tube to use an A5 buffer.

An SBA3 pistol brace will work on your A5 extension/tube.

[MegademiC]

You need an A5 receiver extension/buffer tube to use an A5 buffer.

An SBA3 pistol brace will work on your A5 extension/tube.

Your pm box is full.

[TonyAngel]

That looks good. How does that SBA3 fit on that A5 tube? Tight?