View Full Version : Daniel Defense 9.0 omega on carbine?
Can someone tell me if the Daniel Defense 9.0 Omega will fit a Colt 6920 without modification to the front sight block? Thanks.
Can someone tell me if the Daniel Defense 9.0 Omega will fit a Colt 6920 without modification to the front sight block? Thanks.
It will not.
What you want for a 6920 is the 7.0
Thanks Rob. I'm right handed and don't run a front grip, so I was trying to get the flashlight out farther down the barrel (on the left side of the carbine) so my left hand thumb would have better access to the tailcap, but I guess I'll have to think of something else. Currently I have no FF rail and the light is mounted on the front sight block with good access for my left hand thumb. Any ideas?
R
You could try something like the AR 15 Lite Rail 9.5 FSP (http://www.danieldefense.com/?page=shop/detail&product_id=75) or M4 Rail 9.5 FSP (http://www.danieldefense.com/?page=shop/detail&product_id=26).
Obviously, these are not as easily installed as the Omega, and cost a little more.
I had one and never used it. Here's some reference pics
http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/DD-9-1.jpg
http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/DD-9.jpg
http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/IMG_0878Small.jpg
http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/IMG_0879Small.jpg
Yes, that is what I'm looking for--thanks!
R
Robb Jensen
11-24-08, 09:47
I'd highly recommend a Daniel Defense RIS II and that way you can run a Surefire X200/300 at 12 o'clock. At 12 o'clock you can activate the light from either side with your support/reaction side hand.
I installed this one on lindertws' 6920.
https://www.m4carbine.net/showthread.php?t=20229
http://tinyurl.com/46ngaa
I'd highly recommend a Daniel Defense RIS II and that way you can run a Surefire X200/300 at 12 o'clock. At 12 o'clock you can activate the light from either side with your support/reaction side hand.
I installed this one on lindertws' 6920.
https://www.m4carbine.net/showthread.php?t=20229
http://tinyurl.com/46ngaa
Where can I get one of those bad boys in black and how much $$$?
I don't see them listed on their website so I figure I'll ask here...
Troy makes the MRF-CX which doesn't require the removal of the barrel or front sight to install.
http://store.troyind.com/ProductDetails.asp?ProductCode=SRAI-MRF-C2BT-00
Outlander Systems
11-24-08, 20:13
I really, really want to go "long" on my next rail system, but I'm trying to keep the weight down on the carbine.
GotM4 did a killer job on that.
SeriousStudent
11-24-08, 21:25
I'd highly recommend a Daniel Defense RIS II and that way you can run a Surefire X200/300 at 12 o'clock. At 12 o'clock you can activate the light from either side with your support/reaction side hand.
I installed this one on lindertws' 6920.
https://www.m4carbine.net/showthread.php?t=20229
http://tinyurl.com/46ngaa
Worth. Every. Penny.
Robb installed one on my 6920, and I just got it back today. Very fast turn-around, and he installed a PWS FSC556 to boot. A big tip of the hat to those nice folks at VA Arms.
I'm still experimenting with the panels and rail protectors, and trying a shorty TD foregrip with it. I'm ordering a X300 from Grant on Friday.
It is, as you young folk say, the heat. :D
Parabellum9x19mm
11-25-08, 02:26
I'd highly recommend a Daniel Defense RIS II
sorry to hijack, but does this come in a middy configuration?
if so, what's it called? tks.
Where can I get one of those bad boys in black and how much $$$?
I don't see them listed on their website so I figure I'll ask here...
contact gotm4 - there were two (one black and one brown) in the shop he works at this weekend :cool:
I really, really want to go "long" on my next rail system, but I'm trying to keep the weight down on the carbine.
GotM4 did a killer job on that.
landlord - weight as shown in the pic above is ~7lb 10.5oz. I made a few small changes (moved the light back, moved XTM panels back, added T-1 and MIAD) and she weighs in at 8lb 1oz as shown below:
http://tinyurl.com/5p9u79
sorry to hijack, but does this come in a middy configuration?
if so, what's it called? tks.
Para, in addition to the M4A1 FSP model, there are three other DD RIS II offerings - but none are middy config w/FSP cutout.
RIS II M4A1 (NSN 1005-01-547-2624)
12.57" long, 2.232" wide, 16.2oz
RIS II GL/SSC (NSN 1005-01-548-1381)
11.79" long, 2.232" wide, 15.5oz
RIS II MK18 (NSN 1005-01-548-1385)
9.58" long, 2.232" wide, 14.5oz
Stick posted pictures here (https://www.m4carbine.net/showpost.php?p=237053&postcount=5). Hope this helps...
Worth. Every. Penny.
Robb installed one on my 6920, and I just got it back today. Very fast turn-around, and he installed a PWS FSC556 to boot. A big tip of the hat to those nice folks at VA Arms.
I'm still experimenting with the panels and rail protectors, and trying a shorty TD foregrip with it. I'm ordering a X300 from Grant on Friday.
It is, as you young folk say, the heat. :D
You're gonna like it a lot, be sure to post pics with you get settled with your config!
sorry to hijack, but does this come in a middy configuration?
if so, what's it called? tks.
Samson does one in midlength:
http://www.samson-mfg.com/ar-15_html/product/STAR-MEX-EBR.html
SeriousStudent
11-25-08, 10:40
You're gonna like it a lot, be sure to post pics with you get settled with your config!
I will do so. I'm going to do a couple of range trips, to see what works best on the rail covers and panels.
If the shorty TD grip does not work well, I'll probably just put it on my daughter's AR. I'm waiting for the Magpul MBUS to ship, that is what I want as the BUIS. I'm going to use the T-1 with the tall Larue mount, same as you.
Have you found a low-powered LED to mount, to use as a running light? The way the Surefire 900 LED's work? I am thinking about getting a small red LED squeeze light, and gluing it into a TD pocket rail panel. I'll post a picture of it, when I buy a camera.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.