Mounting Trijicon Accupower 1-4 to carbine with FSP

[FlyPenFly]

Would like to mount a Accupower 1-4x to my carbine with a Centurion rail, Colt Socom barrel configuration. Pic below.

I have a Aero Precision Ultralight 30MM Scope Mount, SPR but I imagine at 1x, the FSP will block my field of view. Is there any way to avoid this with a riser or is that a bad idea?

Have a very similar configuration to this rifle:

62511

[TomMcC]

At 1X the FSB will be very blurry. Even with a riser you will probably see it. The trick is to just ignore it and focus on the important things...the reticle and target. We've all pretty much learned to do this. After a while I didn't even notice the FSB.

I wouldn't use a fixed buis with the Trij. Also the 12 O'clock mounting of the light might be a larger blur than even the FSB. You might want to go to an offset mount for that.

[SBRSarge]

My experience is like TomMcC’s. I think you will tune out the front sight. Or, replace the FSB with a low profile and use offset BUISs.

[army_eod]

Remove FSB and replace with gas block with rail. Mount BUIS. Fold BUIS down. Done.