PDA

View Full Version : Need 1.5 inch Sling Mount--Anyone Know Where It Can Be Found?


Dr. Bullseye
05-27-20, 15:30
Not a QD sling mount, just a slightly oversized loop to replace the 1.25 inch mil spec. My sling is 1.5 inches and it binds at the mount. So far this is all I have found

https://www.amazon.com/Sling-Swivels-2-Pack-Sizes-Attachment/dp/B07C1YK5BM?ref_=s9_apbd_orecs_hd_bw_bHcqT&pf_rd_r=ZNMQD7E1318F0S8X8261&pf_rd_p=2fd6fe39-545c-51f2-aa73-7411689b68c1&pf_rd_s=merchandised-search-10&pf_rd_t=BROWSE&pf_rd_i=4200901

which is unacceptable since there is some sort of QD hardware. This will get in the way of my index finger activating my white light on an Elzetta light mount. So I am looking for just the metal loop, slightly larger than mil spec.

Anyone know of such a thing?
drtywk
05-28-20, 00:25
https://www.midwayusa.com/product/1021007767
Dr. Bullseye
05-28-20, 00:35
https://www.midwayusa.com/product/1021007767

Thanks drtywk but I am looking for just the mount without the QD.
AAMP84
05-28-20, 01:02
Check here: https://milspecmonkey.com/store/15-hardware-diy#
Or here: http://stores.octactical.com/hardware/
Mike Miller
05-28-20, 09:49
Do you have something like this?

https://www.blueforcegear.com/rail-mounted-fixed-loop.html

This one is slightly bigger

https://doublestarusa.com/smr-rail-sling-mount-1-5-a211
drtywk
05-28-20, 11:35
Can you post a picture of your current setup?
Dr. Bullseye
05-28-20, 11:48
Can you post a picture of your current setup?

Yes, here is what I have

https://bravocompanyusa.com/front-sling-swivel-ar15/

and I want something 1/4 inch larger.
quackhead
05-28-20, 12:50
You are probably best letting it bind in current swivel-not sure you will find a larger one, since most remove that and go with rail mounted
boss_hawg
05-28-20, 19:59
Like quackhead said probably not going to find a FSB front sling swivel with a 1.5" loop.

You could use a reducer on your sling like this below with a piece of 1" or 1.25" webbing to fit the standard swivel. Not elegant but it should work.

https://www.strapworks.com/Plastic_Reducing_Loops_p/prl.htm



Sent from my SM-T290 using Tapatalk
Dr. Bullseye
05-29-20, 21:16
Well, I know I have not been able to find a 1.5 loop in mil spec style so quackhead is probably right.

Thank all of you guys!