PDA

View Full Version : Bobro Mounts


Saber329
08-02-20, 08:10
Years ago, I ran a Comp M4S in a Bobro mount; I liked the setup well enough, but my only concern was the locking lever possibly snagging on clothes or other gear.

I'm getting ready to mount a T-2 on a carbine and am looking for a lower 1/3 mount. A) What are your thoughts on the Bobro T-2 mount? B) Any other mount I should consider?
arptsprt
08-02-20, 08:22
Bobro mounts are great mounts.

That said, the last few optics combos I have switched over to Scalarworks based on design and weight. They are awesome.

But Bobro is a solid choice.

Sent from my iPhone using Tapatalk
gunnerblue
08-02-20, 09:28
Current Bobro mounts have a small tab which must be depressed before the lever can be unlocked, preventing unintentional movement- not sure if this is a recent development or not. Tugging on the levers on all of my Bobro's without depressing said tab does not cause any movement.
wigbones
08-02-20, 16:37
I prefer Bobro mounts and have yet to have one snag. They aren't the lightest mount but I really like the locking mechanism.
Pappabear
08-02-20, 19:25
my fav mount
SteveL
08-02-20, 19:33
They are my favorite QD mount, however I have come away from QD in recent years as I just don't see the need for it. With that said I'd look at Geissele or Scalarworks.
GunFighter98
08-02-20, 20:35
I have a Bobro mount with a T1 and I don't experience any snagging issues. They have been flawless in my experience. Thinking about getting another for my PRO.
Saber329
08-04-20, 08:26
For those of you running a Bobro mount and haven't experienced any snagging; what side is your lever on?
wigbones
08-04-20, 09:48
Mine are on the left side.
gunnerblue
08-04-20, 09:56
For those of you running a Bobro mount and haven't experienced any snagging; what side is your lever on?

Left.
markm
08-04-20, 10:18
You could look at Scalerworks. The guys here turned me on to them, and I ended up getting another Aimpoint because I liked the mount so much I wanted two. (plus it takes the lever issue off the table) If there's a way for me to snag stuff, I'll damned sure do it.
Saber329
08-06-20, 08:13
You could look at Scalerworks. The guys here turned me on to them, and I ended up getting another Aimpoint because I liked the mount so much I wanted two. (plus it takes the lever issue off the table) If there's a way for me to snag stuff, I'll damned sure do it.

I appreciate the Scalerworks recommendation. Looks like good stuff and they're in-stock.

The Bobro mounts were supposed to be in on Monday or Tuesday of this week, but as of yesterday afternoon, nothing.

Might have to give the Scalerworks a try, thanks.
3 AE
08-06-20, 09:05
BOBRO mounts are solid QD mounts with one of the best if not the best "Return to Zero". The mount is usually sold with the locking lever on the left side. As a "Lefty" shooter, the lever is on the outside of the gun. If you're a right side shooter, you can switch the lever over to the right side and minimize snagging if any. You can't switch the lever over if you are only using the mount with no risers in place. Email BOBRO on how to switch the lever over or send it to them for the switch over. I can PM you an in stock source if you desire.

Oh, And let's not get into the "How heavy this mount is, and it throws off the balance of my bad ass weapon". Or the "Ounces equals pounds and pounds equal pain" nonsense. Yes, it's 3.9 oz. and so it's a couple of ounces heavier than some. Who cares?
GunFighter98
08-07-20, 21:31
BOBRO mounts are solid QD mounts with one of the best if not the best "Return to Zero". The mount is usually sold with the locking lever on the left side. As a "Lefty" shooter, the lever is on the outside of the gun. If you're a right side shooter, you can switch the lever over to the right side and minimize snagging if any. You can't switch the lever over if you are only using the mount with no risers in place. Email BOBRO on how to switch the lever over or send it to them for the switch over. I can PM you an in stock source if you desire.

Oh, And let's not get into the "How heavy this mount is, and it throws off the balance of my bad ass weapon". Or the "Ounces equals pounds and pounds equal pain" nonsense. Yes, it's 3.9 oz. and so it's a couple of ounces heavier than some. Who cares?

I agree. I am not an engineer but I consider certain things with more mass to be be a bit more durable. The Bobro mount feels like an absolute tank. I love mine.
MWAG19919
08-07-20, 21:38
My T2 is in a Scalarworks Mount. Great mount, and returns to zero each time, but I’d hardly call it QD. Toolless yes. Quick not so much. I have a cheap LPVO in a Bobro and it’s a true QD. Locking lever is on the left side. If you want svelte there are better options but the bobro is a great QD if the width doesn’t bother you
t1tan
08-12-20, 21:55
I’ve had a Bobro T2 mount in the past, I liked it, but Scalarworks is superior in design, weight and clamping method. Unity FAST mounts are also nice.
Pappabear
08-13-20, 18:54
Bobro mounts are great mounts.

That said, the last few optics combos I have switched over to Scalarworks based on design and weight. They are awesome.

But Bobro is a solid choice.

Sent from my iPhone using Tapatalk

I'm always looking for the best. What is better about the Scalarworks mount, it mounts with screws-on with a knob. The Bobro has a lever that requires no adjustment, unlike the Larue. I looked up and watched a video but couldn't see any upside. Honest question, not trying to bust balls.

PB
El Vaquero
08-13-20, 19:06
They are my favorite QD mount, however I have come away from QD in recent years as I just don't see the need for it. With that said I'd look at Geissele or Scalarworks.

It’s all purpose driven. Over the years I’ve not been a huge fan of QD mounts but I have found myself in the market for some.

Have had several incidents recently where I deployed my duty rifle (at night). It had been sitting in my Tahoe for several hours with the a/c blasting. It hit that hot, humid, Texas air and my T2 instantly fogged up. Making my optic and iron sights useless. Got me thinking of the convenience of a QD mount. Could just pop that optic off and switch to irons.

I’ve got my T2 mounted on a Geissele mount and the back end of my Spiderco will double as a flathead screwdriver you remove it in a pinch but a QD mount is quick and easier. **I now throw a small rag or towel over my optic in the summer months. Helps with the fogging.**
SteveL
08-13-20, 20:01
It’s all purpose driven. Over the years I’ve not been a huge fan of QD mounts but I have found myself in the market for some.

Have had several incidents recently where I deployed my duty rifle (at night). It had been sitting in my Tahoe for several hours with the a/c blasting. It hit that hot, humid, Texas air and my T2 instantly fogged up. Making my optic and iron sights useless. Got me thinking of the convenience of a QD mount. Could just pop that optic off and switch to irons.

I’ve got my T2 mounted on a Geissele mount and the back end of my Spiderco will double as a flathead screwdriver you remove it in a pinch but a QD mount is quick and easier. **I now throw a small rag or towel over my optic in the summer months. Helps with the fogging.**

That is a valid concern, but personally rather than go QD on my optic mount I think nowadays I would rather run offset flip-up irons. Just pop them up until your optic clears up. And you don't have to keep up with the optic you removed. Ultimately it's two different roads to the same destination though, so go with whichever you prefer.