pointblank4445
08-03-20, 10:33
Under 300 rounds of use. Barrel was purchased 2014ish by a colleague as a stripped barrel.
I shot this upper before disassembly and it shoots as a CHF barrel should.
Barrel is very good except for his bubba'd gas block dimpling where the jig didn't jive with his aftermarket gas block screw placement. Everything is covered by low-pro gas blocks
Crown, chamber, rifling is clean. Gas port measures at 0.077".
16" Gov Profile mid-length gas "BHF" Hammer forged chrome-lined barrel.
1/7" twist, 1/2x28 threads
$190 shipped for the stripped barrel
$245 shipped for the barrel and Forward Controls gas block (works with current dimples and can be pinned)
$300 shipped for the barrel, FCD gas block, and BCM Mod 0 comp
NO TRADES
https://i.imgur.com/5fXXF2e.jpg
https://i.imgur.com/Hjmsi7b.jpg
https://i.imgur.com/1lYAEBV.jpg
https://i.imgur.com/KZ8L2fs.jpg
https://i.imgur.com/3KNW1Jv.jpg
https://i.imgur.com/PA3oPnj.jpg
https://i.imgur.com/eaN9dcW.jpg
I shot this upper before disassembly and it shoots as a CHF barrel should.
Barrel is very good except for his bubba'd gas block dimpling where the jig didn't jive with his aftermarket gas block screw placement. Everything is covered by low-pro gas blocks
Crown, chamber, rifling is clean. Gas port measures at 0.077".
16" Gov Profile mid-length gas "BHF" Hammer forged chrome-lined barrel.
1/7" twist, 1/2x28 threads
$190 shipped for the stripped barrel
$245 shipped for the barrel and Forward Controls gas block (works with current dimples and can be pinned)
$300 shipped for the barrel, FCD gas block, and BCM Mod 0 comp
NO TRADES
https://i.imgur.com/5fXXF2e.jpg
https://i.imgur.com/Hjmsi7b.jpg
https://i.imgur.com/1lYAEBV.jpg
https://i.imgur.com/KZ8L2fs.jpg
https://i.imgur.com/3KNW1Jv.jpg
https://i.imgur.com/PA3oPnj.jpg
https://i.imgur.com/eaN9dcW.jpg