PDA

View Full Version : Geissele “wide body” trigger?


ta0117
02-21-21, 03:17
I’m about curious what Geissele means when they say their SSA-X has a “wide body”. I can’t see any differences, so does anyone know what it is? What is the benefit of this?
georgeib
02-21-21, 05:24
From Geissele:

"The SSA-X Government trigger is a two-stage trigger that features a Nanocoated wide body trigger and Nanocoated Hammer, with a special Chrome Nitride disconnect that combines advancements in coating design to bring about the next evolution of the venerable SSA. These coatings dramatically enhance wear and corrosion resistance and keep the trigger running smooth and breaking clean even after heavy use with minimal lubrication. The SSA-X Government trigger is a non-adjustable trigger with a familiar M4 bow, that allows the trigger to be light enough for accurate and precise shots, but forgiving enough for dynamic close in work as well.

While the SSA-X Government Trigger comes assembled with a heavier Mil Spec pull weight, we are also including a lighter trigger spring to bring the 1st stage down to 2.75 - 3 lbs., and the overall pull weight down to 4.25 - 5.0 lbs. if so desired."

In other words, it's an SSA with a coating and different weight springs.
1168
02-21-21, 05:51
It doesn’t feel like an SSA. 3 out of 3 in my weekly group prefer it over other G triggers they have tried, including myself. I had no idea it was coated; I’ll ask the owner today. Its in a factory G rifle.
ta0117
02-21-21, 17:26
It doesn’t feel like an SSA. 3 out of 3 in my weekly group prefer it over other G triggers they have tried, including myself. I had no idea it was coated; I’ll ask the owner today. Its in a factory G rifle.

That's odd, because the default spring set actually is heavier than the standard SSA, and you need to install the alternate spring to bring it down to SSA level.
1168
02-21-21, 20:08
Total pull weight isn’t everything. In fact, in every aftermarket trigger I have I use either the heavier spring that comes with it or a Larue HD spring.

Between our daily drivers, backups, and PCC’s we’ve got 5 or 6 different G triggers. Including SSA, SSA-E, and SSA-X (came in a G rifle). My main gat has a Wilson TTU Paul Howe, and my SSA is in a rifle I don’t shoot much, FWIW. The other two guys are nuts for G triggers and have them in almost everything.

I shot with the owner of that SSA-X today. When I asked about coatings, he said its black. Which makes sense considering he doesn’t clean the lower, probably ever. Its in his primary rifle.


That's odd, because the default spring set actually is heavier than the standard SSA, and you need to install the alternate spring to bring it down to SSA level.
ta0117
02-23-21, 20:22
Total pull weight isn’t everything. In fact, in every aftermarket trigger I have I use either the heavier spring that comes with it or a Larue HD spring.

Between our daily drivers, backups, and PCC’s we’ve got 5 or 6 different G triggers. Including SSA, SSA-E, and SSA-X (came in a G rifle). My main gat has a Wilson TTU Paul Howe, and my SSA is in a rifle I don’t shoot much, FWIW. The other two guys are nuts for G triggers and have them in almost everything.

I shot with the owner of that SSA-X today. When I asked about coatings, he said its black. Which makes sense considering he doesn’t clean the lower, probably ever. Its in his primary rifle.

I understand the coatings can make a difference, but what does the "wide body" mean and what does it do?
sinister
02-23-21, 22:12
The actual contact point or "Shoe" (the part your finger wraps around) is wider than standard. Kinda-sorta like the difference between a standard GI 1911 and a Gold Cup. It gives your finger pad a wider surface to pull against, making it feel lighter.
17K
02-26-21, 17:16
How much better can an SSA really get?

I’ve seen a bunch of them 10+ years old and they’re still going strong.
Warp
02-26-21, 18:30
How much better can an SSA really get?

I’ve seen a bunch of them 10+ years old and they’re still going strong.

Noticeably
17K
02-26-21, 20:28
Noticeably

You talking feel or durability?
Dukr
02-26-21, 21:00
I wonder if wide-body could be something like LaRue's MBT-2S trigger.
Warp
02-27-21, 18:48
You talking feel or durability?

Feel.

That's my fault, I don't remember reading your second sentence, I totally missed you were referring to durability. I'm in no position to make any statements regarding durability or longevity of any of these triggers.
Renegade04
02-28-21, 18:05
The actual contact point or "Shoe" (the part your finger wraps around) is wider than standard. Kinda-sorta like the difference between a standard GI 1911 and a Gold Cup. It gives your finger pad a wider surface to pull against, making it feel lighter.

That is pretty much what the LaRue Tactical MBT-2S is. For the money and quality, the MBT-2S is a better choice whether in curved or straight bow configuration.