ack495
10-27-21, 21:04
So I'm thinking of getting out of 5.45...again, just lost interest in the caliber. I'm looking to make a trade with but will sell.
At it’s core it’s a Romanian SAR 2 in 5.45x39. Numbers matching receiver, trunnion, bolt, carrier, dust cover. Original safety and rear sight block as well. Rebarreled by David Santurri of Santurri LTD, with a new cold hammer forged chrome lined AK builder barrel. Chopped to 14.5” and then Pinned and welded a Dead Air brake. Combo Jmac customs GBC-13 gas block/front sight. Stainless barrel that I hit with hi temp paint to match. Worn some by gas block.
I then added a used TDI mlok lower forend and a Romanian aims Bakelite gas tube cover. ALG recoil spring. Also put in an ALG trigger that I profiled and Armacon enhanced safety lever.
And finished off with a Rifle Dynamics AR adapter, buffer tube, QD end plate and a MFT minimalist stock. And a black Tango down grip.
Includes 4 metal polish tantal mags ranging in condition. And one Polish circle 11 green translucent mag. All good to go. The v project mag and one tantal mag look almost new.
I’ll include 300ish rounds of both GT and Russian 7n6, most in boxes some loose.
This was my take on a modern pm90 in 5.45 or MPi AKS-74. I’ve only shot maybe 100 rounds through it in total. I was having some occasional pierced primers with only the GT, so I had my Smith trim the firing pin. But that didn’t come out perfect as I starting having light strikes now, so I bought a new firing pin to be included but that will have to be trimmed because it’s a standard Russian AK74 length pin.
But the rifle seems pretty accurate for what it is. Probably be a 2-2.5 MOA gun. I’ve only shot at 25 yards so far and using a 1X prism they were all very tight.
Cost for all this was north of $1400, not including mags and ammo, but I’m looking to trade for something else I’m currently interested in. Here’s a list so far:
B&T GMH9
KUSA KP9
Scorpion EVO S1 pistol
Cmmg banshee
Other 9mm pistol carbines?
Beretta 1301 OD green, but any color
Mossberg 930 spx
Milled AK
KUSA KR103
Arsenal 107R
WBP Fox
Mak 90
Vz58
7.62 AK under folder, Romy, Yugo etc
M92 builds or Kits with OG barrel
Arsenal Sam7k-44
Nice SKS
M1 Garand or m1 carbine. Shooter not a collector
Lever gun in .357 or .44 mag
FN ps90
MK12 or MOD H upper
BH Mk262 ammo
Factory piston AR15 or other 556 piston guns
Sig Cross 308
Old school cool like a pps-43 or ppsh-41
Ruger mini 14
Cash +/- depending on trade
OR sell for $1350 obro shipped for all of it
Text me or email if interested or want pics
richardaprea@gmail.com
five08320008seven
At it’s core it’s a Romanian SAR 2 in 5.45x39. Numbers matching receiver, trunnion, bolt, carrier, dust cover. Original safety and rear sight block as well. Rebarreled by David Santurri of Santurri LTD, with a new cold hammer forged chrome lined AK builder barrel. Chopped to 14.5” and then Pinned and welded a Dead Air brake. Combo Jmac customs GBC-13 gas block/front sight. Stainless barrel that I hit with hi temp paint to match. Worn some by gas block.
I then added a used TDI mlok lower forend and a Romanian aims Bakelite gas tube cover. ALG recoil spring. Also put in an ALG trigger that I profiled and Armacon enhanced safety lever.
And finished off with a Rifle Dynamics AR adapter, buffer tube, QD end plate and a MFT minimalist stock. And a black Tango down grip.
Includes 4 metal polish tantal mags ranging in condition. And one Polish circle 11 green translucent mag. All good to go. The v project mag and one tantal mag look almost new.
I’ll include 300ish rounds of both GT and Russian 7n6, most in boxes some loose.
This was my take on a modern pm90 in 5.45 or MPi AKS-74. I’ve only shot maybe 100 rounds through it in total. I was having some occasional pierced primers with only the GT, so I had my Smith trim the firing pin. But that didn’t come out perfect as I starting having light strikes now, so I bought a new firing pin to be included but that will have to be trimmed because it’s a standard Russian AK74 length pin.
But the rifle seems pretty accurate for what it is. Probably be a 2-2.5 MOA gun. I’ve only shot at 25 yards so far and using a 1X prism they were all very tight.
Cost for all this was north of $1400, not including mags and ammo, but I’m looking to trade for something else I’m currently interested in. Here’s a list so far:
B&T GMH9
KUSA KP9
Scorpion EVO S1 pistol
Cmmg banshee
Other 9mm pistol carbines?
Beretta 1301 OD green, but any color
Mossberg 930 spx
Milled AK
KUSA KR103
Arsenal 107R
WBP Fox
Mak 90
Vz58
7.62 AK under folder, Romy, Yugo etc
M92 builds or Kits with OG barrel
Arsenal Sam7k-44
Nice SKS
M1 Garand or m1 carbine. Shooter not a collector
Lever gun in .357 or .44 mag
FN ps90
MK12 or MOD H upper
BH Mk262 ammo
Factory piston AR15 or other 556 piston guns
Sig Cross 308
Old school cool like a pps-43 or ppsh-41
Ruger mini 14
Cash +/- depending on trade
OR sell for $1350 obro shipped for all of it
Text me or email if interested or want pics
richardaprea@gmail.com
five08320008seven