lindertw
01-03-07, 12:26
I've read the link to the improved battle sight zero, and I'd like to give it a try with my new AR.
My rear sight bottoms out on 6/3, and uses 1/2 clicks (takes six clicks to move from 3 to 4); so I'll need to move -4 (counterclockwise) and tighten the set screw if I'm reading the improved BZ instructions properly.
Here's where I get a little turned around: When I battlesight according to TM9-1005-319-10, where do I set my rear sight - the new mechanical stop (6/3 -4 clicks), at 6/3, or at the "Z"?
What I'm thinking is:
-adjust rear sight so it's new mechanical stop is 6/3 -4 clicks
-sight in with small aperature, rear sight set down to 6/3 -4 clicks; NOT at 6/3 or clicked up to the "Z"
-shoot and adjust front elevation and rear windage as needed to center
-when centered return to 6/3 and flip to larger aperature and I'm done.
Am I on the right track? Thanks in advance for the help.
My rear sight bottoms out on 6/3, and uses 1/2 clicks (takes six clicks to move from 3 to 4); so I'll need to move -4 (counterclockwise) and tighten the set screw if I'm reading the improved BZ instructions properly.
Here's where I get a little turned around: When I battlesight according to TM9-1005-319-10, where do I set my rear sight - the new mechanical stop (6/3 -4 clicks), at 6/3, or at the "Z"?
What I'm thinking is:
-adjust rear sight so it's new mechanical stop is 6/3 -4 clicks
-sight in with small aperature, rear sight set down to 6/3 -4 clicks; NOT at 6/3 or clicked up to the "Z"
-shoot and adjust front elevation and rear windage as needed to center
-when centered return to 6/3 and flip to larger aperature and I'm done.
Am I on the right track? Thanks in advance for the help.