Ok dumb question

[Nitris]

Have answer

[bkb0000]

does UTG not make 37mm mounts? i bet they do. you dont seem to have anything against UTG... try there.

you havent done a whole lot of reading around here, have you?

[asharris7]

Not if he has an Olly.

[thopkins22]

You should find a stand alone stock for it and remove it from your rifle immediately.

I actually want a flare launcher to use as a toy...but certainly not on my gun.

[6933]

Olympic Arms with UTG furniture; adding a flare launcher.....not even sure what to say.

[warpigM-4]

I got this off 37mm.com
search around there and google for parts would be your best bet.
check gunbroker sometimes parts come up there Good Luck








37mm Reloading Supply Companies

* Okie BigBores "We sell 40mm nylon hulls which can easily be turned down to chamber in a 37mm launcher, and reload kits to fit OUR hulls only." Also features reloading instructions on their site.

* PIE Industries "We offer original, U.S. military, stock material. Our 37mm casings are delivered without primers due to safety/shipping regulations and were once 40mm training shells, now remanufactured for civilian use." They also have basic reloading instructions.

* Brassman Brass Sells 8 1/4" long 37mm aluminum shells for $1 each. Not mentioned on the site, so you'll have to ask for them.

* CS Enterprises Sells 40mm nylon cases which can be trimmed down to 37mm
$20 per 100 cases
37mm projectile kits, $1 each

* CatCo Sells rifled cases
316 California Ave. #341
Reno, NV 89509
707-253-8338 Voice
707-253-7149 Fax

* RPB Sells empty cases for $1 each, case "kits" and rifled cases
2800 Washington St.
Avandale Estates, GA 30002
404-297-0907 Voice
404-297-0917 Fax
800-858-0809 Orders

* Et Cetera, L.L.C. Sells 37mm launchers, and rifled cases
P.O.Box 639
Copperhill, TN 37317
800-642-1600 Orders
423-496-9050 Customer Service
423-496-2111 Fax

* Skylighter Sells paper tubing, fuse, chemicals, books and more.

* Pyrotek Sells paper tubing, fuse, chemicals needed, books, glassware and more.
P.O. Box 300
Sweet Valley, PA 18656
570-256-3087 Voice

* Firefox Sells reload kits, fuse and chemicals needed
firefox@pcaxxess.net
P.O. Box 5366
Pocatello, ID 83202
208-237-1976 Voice or Fax

* Thumper 40mm Sells 40mm nose cones and center plugs
thumper40m@aol.com
THUMPER40MM
G.A. Szymanowski
329 East 27th St.
Erie, PA 16504
814-456-6527 Voice

[randolph]

does UTG not make 37mm mounts? i bet they do. you dont seem to have anything against UTG... try there.

you havent done a whole lot of reading around here, have you?


Not if he has an Olly.


Olympic Arms with UTG furniture; adding a flare launcher.....not even sure what to say.



Gawd, I love this site :D

[bkb0000]

Gawd, I love this site :D

wha? nobody's gotten crazy... couple of us even tried to help

[Robb Jensen]

Say hello to my little friend. ;)

[Nitris]

Thanks for the help guys, and yes it's a olympic and I have had no problems with it. I also have colts as well, its only this one I have a flare launcher on for kicks and thats about it but would like it to look better. I'll check the places that have been listed, and guys really olympic's not that bad really.

[SWATcop556]

and guys really olympic's not that bad really.

I would caution you to read ALL of the information saved at the top of both the General Discussion and Technical Discussion boards before you get to hyped up about defending your OLY.

While it may work for your intended applications, that's great. For what 99% of the shooters on this board they do not perform, and this is very well documented.

Good luck on finding a new mount for your rifle. I have no experience with a rifle mounted launcher as all of ours for less-lethal are stand alone. The suggestion of removing it from your rifle and mounting a stock would be the route that I would go.

[mhanna91]

Thanks for the help guys, and yes it's a olympic and I have had no problems with it. I also have colts as well, its only this one I have a flare launcher on for kicks and thats about it but would like it to look better. I'll check the places that have been listed, and guys really olympic's not that bad really.You can't tell them that.

[Nitris]

I would caution you to read ALL of the information saved at the top of both the General Discussion and Technical Discussion boards before you get to hyped up about defending your OLY.

While it may work for your intended applications, that's great. For what 99% of the shooters on this board they do not perform, and this is very well documented.

Good luck on finding a new mount for your rifle. I have no experience with a rifle mounted launcher as all of ours for less-lethal are stand alone. The suggestion of removing it from your rifle and mounting a stock would be the route that I would go.



Well I read up on olympic from this site, I can see most have less opinion of it, but I'll still keep it. Love my Colts: elite and 6920 LE great rifles.

[Dunderway]

Seeing as it has no practical purpose, I would just keep what you have, as long as it works.

For what it's worth, I shot a bunch of boating flares out of my 870 a few years ago on the 4th of July, and it was pretty entertaining.

[CaptainDooley]

Okay, I'm a little new to this... but why would one need a 37mm flare launcher on their carbine?

In looking for this info I found a poster with a Spike's Havoc that registered it as a DD so he can fire actual explosives...??? Is that possible?

[nichud09]

i dont think hes firing actual explosives out of the havoc, but other rounds considered as DD. anything thats not a flare/smoke/cs... more like flachette rounds. i have a 37mm launcher too, and i have absolutely no use for it,except for last nights fourth of july, gotta love star clusters!!haha... but usually it just sitting in my safe.
as far as the sole purpose of a 37mm launcher or 40mm for that matter...its not needed here, its honestly just personal satisfaction/and cool looks factor. no one in the US should seriously need a launcher for any matter unless its just for fun/looks, or you like blowing shit up-which is classified as fun.. or,....or if you just enjoy a good chubby when looking at your weapon...nothing wrong with that.


also, call me crazy but i couldve swore that ive heard that a 40mm mount, will work with the 37mm launcher, thus getting it nice and snug against your rifle... i think i read that at ar15.com sometime ago... but im not 100% sure. check it out.

[SwatDawg15]

:rolleyes:

[Nitris]

i dont think hes firing actual explosives out of the havoc, but other rounds considered as DD. anything thats not a flare/smoke/cs... more like flachette rounds. i have a 37mm launcher too, and i have absolutely no use for it,except for last nights fourth of july, gotta love star clusters!!haha... but usually it just sitting in my safe.
as far as the sole purpose of a 37mm launcher or 40mm for that matter...its not needed here, its honestly just personal satisfaction/and cool looks factor. no one in the US should seriously need a launcher for any matter unless its just for fun/looks, or you like blowing shit up-which is classified as fun.. or,....or if you just enjoy a good chubby when looking at your weapon...nothing wrong with that.


also, call me crazy but i couldve swore that ive heard that a 40mm mount, will work with the 37mm launcher, thus getting it nice and snug against your rifle... i think i read that at ar15.com sometime ago... but im not 100% sure. check it out.

Pretty much it just a cool factor and shooting flares and clusters on the 4th. I have no rounds for it as of yet. Will look for the 40mm mount and see if it will work.

[Aray]

deleted, no value

[ra2bach]

wow. that looks really heavy.

the mount, that it...

[6933]

Still butt hurt I see....(not directed at poster above this, obvious once one looks around)