View Full Version : springs for 1911s
My customized springfield 1911, originally buit for IDPA, is coming out of mothball, and seeing service as a carry gun. Not much needs to be changed other than putting a factory style short spring guide and factory style plug back in. However I need recomendations on a spring now that I will be shooting mostly 230 FMJ and other defense loads. Gun was built to shoot downloaded cast bullets before.
Robb Jensen
02-05-07, 07:24
A 16lb spring will work best for you. Anything heavier will increase felt recoil and muzzle flip. This is because the slide will be out of battery longer. Some gun builders use heavier recoil springs because their guns are so tight that it's required to get them to lock when their even just a little dirty. I shoot an 'un-tightened up' Springfield Armory 'Loaded' that I've customized a little myself with a little help from a friend. I run a stock 16lb rated spring (a Wolff) in it. I shoot this in IDPA CDP division.
http://img.photobucket.com/albums/v408/gotm4/gunpics/1911.jpg
robb, you guys carry the wolff springs in the store?
1911 Users Guide (http://www.10-8performance.com/id9.html)
Robb Jensen
02-05-07, 12:09
robb, you guys carry the wolff springs in the store? No but we do have standard Brownells 16lb springs.
docholliday
02-05-07, 12:25
18.5 lb. variable in my Les Baer Premier II. I tend to shoot more of the heavier/hotter 230gr stuff, or at least a GI ball equivalent. My carry load is the Federal HST 230gr +p @ 980-1000fps.
I use 18/18.5 lb. springs in all of my full size 1911-style guns. They all work.
The wimpiest ammo I shoot through them is factory 230gr FMJ which usually runs 190-200PF, depending on the gun, the temp, and the specific brand. My carry ammo is hotter (Georgia Arms .45ACP 230gr Gold Dot +P).
Thanks to all for the suggestions. I believe it has an 18.5 variable right now, but I will try a 16 and see how it feels. Thanks again.
Don't forget about your hammer spring. 23lb is stock but many drop down to a 19lb spring when the gun is set up for soft loads.
The hammer spring like the recoil spring does affect timing, recoil impulse etc,. If you have a 19lb hammer spring I'd suggest putting a 23lb hammer spring back in for extended hardball use.
Robb Jensen
02-06-07, 07:31
Don't forget about your hammer spring. 23lb is stock but many drop down to a 19lb spring when the gun is set up for soft loads.
The hammer spring like the recoil spring does affect timing, recoil impulse etc,. If you have a 19lb hammer spring I'd suggest putting a 23lb hammer spring back in for extended hardball use.
Good point. I run a 21lb spring in mine.
Damn, thats right, I forgot about that one. thanks guys
Jason Burton
02-06-07, 21:58
In my 5" .45ACP 1911s I like a 16# recoil spring and a 23# main spring... I install and recommend the same for the guns I build.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.