PDA

View Full Version : m855 load data



ColdDeadHands
08-30-09, 08:15
Does anybody have some reload load data for 5.56 M855 or SS109? Thanks in advance.

Kevin
08-30-09, 08:58
I was curious, too. Found the below online, don't know if it's accurate:

Cartridge, 5.56mm, Ball, M855

Use:
Machine Gun, 5.56mm, M249E1

Rifle M16A2. The cartridge is designed for use against personnel and unarmored targets.

Description:
BALL. the cartridge is identified by a green bullet tip.

Projectile Weight - 62 grains
Chamber Pressure - 55,000 psi
Velocity - 3025 fps, 15 feet from muzzle
Weight - 190 grains
Length - 2.26inches
Primer - Percussion (Crimped into case)
Propellant - WC 844
Charge - 26.1 grains

freakshow10mm
08-30-09, 09:37
For canister powders, most use H335, Varget, or BLC2 and use 69gr data to work up.

chadbag
08-30-09, 12:32
WC 844 is approximately the same as H 335 (supposedly the same "powder" but not in canister grade so you get lots of variation from lot to lot).

Start around 24 gr H335 and work up from there.

I bought a bunch of WC 844T (tracer variant) and have been loading with that using approx H335 data (start on low end of H335 and work up) and have been using around 25 gr with both 55gr and 62 gr bullets.

Chad

jasonb
08-30-09, 22:31
I do not have a chrony, but using IMR4895 and AA2230 I have loaded some accurate M855 clones. They are in the 24gr neighborhood.