View Full Version : Can I see your 11.5 BCM builds?
Like the title says, just looking for 11.5 BCM build pictures. Thanks. :D
I'll get mine up as soon as my upper arrives today!
OK, here it is. Nice snug fit BCM 11.5" on an Aero Precision lower.
RetreatHell
10-06-09, 15:58
Here ya go!
http://i685.photobucket.com/albums/vv219/RetreatHell/BCM%20SBR/IMG_8796_2.jpg
http://i685.photobucket.com/albums/vv219/RetreatHell/BCM%20SBR/IMG_8788_2.jpg
http://i685.photobucket.com/albums/vv219/RetreatHell/BCM%20SBR/IMG_8719_2.jpg
http://i685.photobucket.com/albums/vv219/RetreatHell/BCM%20SBR/IMG_8826.jpg
Specs:
-BCM 11.5" Upper
-Knights Armament URX II Mid-Length Rail with integrated flip-up front BUIS
-BCM bolt carrier group (you can't see the "BCM" logo on the carrier b/c there's so much carbon and shit built up on it)
-BCM Mod 04 charging handle
-Knight's Armament Triple Tap muzzle brake
-Surefire X300 weapon light
-Magpul XTM rail covers, along with (1) Magpul ladder rail cover on the 12 o'clock rail
-Larue Tactical FUG (Forward Universal Grip) with the "stubby" end cap inserted
-Aimpoint Micro T-1 RDS in Larue Tactical high mount (best RDS ever!)
-Knights Armament micro 300m rear folding BUIS
-LWRC lower with factory components (registered SBR)
-Magpul enhanced trigger guard
-Magpul MIAD pistol grip
-Magpul Battery Assist Device (BAD) Lever
-Magpul ASAP rear end-plate single-point sling mount (I have the Magpul MS2 sling as well)
-Magpul CTR stock (mil-spec version/size)
-Magpul extended butt pad
This SBR as shown (minus the magazine) weighs a mere 7lbs 5.6oz. It's a very light setup and it runs and performs fantastically! I've got 2,120 rounds through it since I bought it just over one month ago, and I'll be putting an additional 1,000-1,500 rounds through it this coming weekend at a carbine class. I've yet to have a single malfunction
Paul over at BCM builds some damn fine guns, and I'd highly recommend buying one (or two or three) if you're considering it, or if maybe you're on the fence about whether or not you should buy one. These BCM uppers are money very well spent, and their low cost/high value ratio is simply amazing! BCM reminds me of Magpul: they build much better products than the majority of their competition and actually sell them for less than the competition does. In my opinion, that's something very special right there...
Hope this helps you out, brother.
Semper Fi',
Paul
Awesome gun RetreatHell! I just sent in my paperwork and hoefully will be getting a setup like yours.
Belmont31R
10-23-09, 16:23
Pretty similar to above...
http://i274.photobucket.com/albums/jj245/BM31R/BCMKAC115.jpg
the_1iviper
10-23-09, 17:40
and another :D
http://img.photobucket.com/albums/v619/1iviper/bcmkacupper.jpg
http://img.photobucket.com/albums/v619/1iviper/bcm_kac5.jpg
Here's mine which is very similar to the ones above. It's a BCM hammer-forged barrel with Vltor MUR and KAC URX. I'm still waiting to get the stamp back for a KAC E3 lower that I'll be using for this build. I'll also be adding a T1 very soon.
http://i85.photobucket.com/albums/k60/brandoneh297/BCM115Upper004.jpg
http://i85.photobucket.com/albums/k60/brandoneh297/BCM115Upper005.jpg
Did you guys build them yourself or is that the one from BCM?
Did you guys build them yourself or is that the one from BCM?
I had mine built by Neil from Gun Gallery. I know MSTN and BCM are also doing them with the URX. There may also be a few others but I'm not sure.
Great, Thanks. Is that Gun Gallery from Jacksonville?
I had mine built by Neil from Gun Gallery. I know MSTN and BCM are also doing them with the URX. There may also be a few others but I'm not sure.
Belmont31R
10-23-09, 20:20
Great, Thanks. Is that Gun Gallery from Jacksonville?
Yep, and they built mine too. Good people to work with....
Well, I know where I'm going this weekend. Thanks!
Yep, and they built mine too. Good people to work with....
the_1iviper
10-23-09, 21:24
Yep, and they built mine too. Good people to work with....
another big +1 for neil,as has been said b4 great guy to deal with :D
http://aggunner.com/pictures/ar/AA/aa.jpg
11.5 BCM barrel and an upper from BCM
I actually had no idea what they had until I saw them here. I have driven by the place a thousand times and never thought twice about going in. I am definitely going there now.
In action East of Mesa, AZ.
3466
eternal24k
11-15-09, 22:27
give this a bump, Im having a hard time between 10.5 and 11.5
Here's mine with a 10.3" D.D. barrel. I hope these images help on your decision :)
http://i155.photobucket.com/albums/s300/dogg-e/SBR_002.jpg
http://i155.photobucket.com/albums/s300/dogg-e/SBR_001.jpg
http://farm3.static.flickr.com/2580/3827683921_6555f0e4f8_b.jpg
http://farm4.static.flickr.com/3467/3828480372_9e4792a22d_b.jpg
BCM 11.5 upper
DD 10" Lite Rail
Troy Front & Rear BUIS
BCM BCG
Aimpoint T1
CD Lower
Magpul UBR & MIAD
LaRue FUG and T1 Mount
Surefire X300
This was on TOS and looks pretty sweet
http://img.photobucket.com/albums/v445/bravocompanyusa/IMG_2308.jpg
RetreatHell
11-17-09, 23:55
http://i232.photobucket.com/albums/ee21/dannylanee/Danny/DSC01288.jpg
Someone's been shooting a lot lately;) It's looking goo, brother!
Semper Fi,
Paul
http://i232.photobucket.com/albums/ee21/dannylanee/Danny/DSC01288.jpg
Does anyone have pics of one built up with a LaRue 11" sbrs rail? I'm leaning towards that over the 10" LaRue and DD rails.
Or maybe I'll just wait until the 12.5" versions are widely available.
Someone's been shooting a lot lately;) It's looking goo, brother!
Semper Fi,
Paul
Thanks. It just passed the 2,500 mark. I just stippled those XTM panels and I really like it. I need to take the time and do a post on the rifle.
tiger seven
11-18-09, 12:17
Kept mine pretty plain.
http://i3.photobucket.com/albums/y82/zulu15/BCM4-1.jpg
This is just a simple, lightweight upper for having fun at the range. All the "tactical"stuff is on my 10.5" LMT upper. :)
Derek
sorry to highjack, but I am also looking at the 11.5. Would it be possible for some more pictures of the 11.5 with a DD lite rail. I am looking for an alternative to the KAC URX II rail. Which is a fantastic rail but I want the ability to change rails and or barrels with out expensive special tools.
sorry to highjack, but I am also looking at the 11.5. Would it be possible for some more pictures of the 11.5 with a DD lite rail. I am looking for an alternative to the KAC URX II rail. Which is a fantastic rail but I want the ability to change rails and or barrels with out expensive special tools.
This barrel is a BCM BFH 11.5. It's on a Noveske upper (matched upper/lower) and uses a DD Lite 9.0 rail. It's been a completely functional rifle for me. I have no experience with the URX, but I have absolutely no complaints about the DD Lite. It was easy to install, and as you noted requires no special tools, only the DD barrel wrench, which costs like $10. It slides easily over the VLTOR Lo-Pro gas block I had pinned at Rainier. They were clever enough to install the barrel nut and ring for me first, so that I didn't have to unpin the gas block when I got the barrel back. I bought the barrel from BCM, bought the DD Lite and the gas block from Rainier, along with gas block installation. I sent them the barrel, they sent me back the pinned gas block, barrel nut/ring installed, and the rest of the DD Lite rail.
http://SSEquine.net/sbr6ss.jpg
Top one I put together with BCM 11.5/bcg, rainier upper, and urx.
http://img442.imageshack.us/img442/5228/pa090241.jpg
Quiet-Matt
10-19-11, 17:16
Well, the upper receiver, CH, and RE came from Bravo Co.;)
https://lh4.googleusercontent.com/-x-KC1LJySpc/TpCc2MMjupI/AAAAAAAAJAI/dguB2jKsteY/s1024/DSC02551.JPG
https://lh3.googleusercontent.com/-9bUP_MvX_uQ/TpCc629jNFI/AAAAAAAAJAU/7joooW_vYbM/s1024/DSC02554.JPG
https://lh3.googleusercontent.com/-3IXSfyDuOec/TpCdJPUCvmI/AAAAAAAAJAQ/zA-DEhwhgaA/s1152/DSC02566.JPG
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.