The Official SBR Picture Thread [Archive] - Page 8

buddyhoohaw

08-05-10, 09:47

MUR upper
DD 12.5 CHF barrel
DD Lite 10 rail
Noveske lower
Magpul MOE grip
Magpul ASAP
Spikes ST-T2 buffer
G&R LPK
BCM BCG/receiver extension
Vltor gas block
SOPMOD stock
Troys DOA read sight and M4 front
Surefire M300
Aimpoint H-1 in ADM mount or C3 in Bobro mount

I think that is pretty much it. I have an AFG and some XTM panels too just deciding which color I am going to use. Finalized pics will be going up shortly in my build thread.

Thanks for the comments. :D

Nicely done!!

buddyhoohaw

08-05-10, 17:24

ALCOAR

08-05-10, 17:46

I just added the Vltor IMOD to my Noveske SBR and I am impressed with the new design....they really nailed it.

http://i5.photobucket.com/albums/y198/buddyhoohaw/Noveske/N4-01.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/Noveske/N4-02.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/Noveske/N4-03.jpg

I have an M300a on order to replace my old G2 in Vltor mount.

Cheers

Straight up BADASS BLASTER:cool: You got such an eye for short barreled configs..by far one of the best Ive seen, every sbr you own is put together with such great touch.

How do you like the troy rail covers, looks sweet.

buddyhoohaw

08-05-10, 19:04

Straight up BADASS BLASTER:cool: You got such an eye for short barreled configs..by far one of the best Ive seen, every sbr you own is put together with such great touch.

How do you like the troy rail covers, looks sweet.

Thanks Trident. The Troy rail covers are great; think KAC, except they seat anywhere on the rail and have a more aggressive/stipled surface. I bought them b/c they appeared to be similar in hue to the LMT sopmod tan, however they are somewhat in between LMT tan and magpul FDE. I think they are a bargain at (3) for $20.00.

Cheers

heem_infinite

08-05-10, 22:31

Just finished putting this together today

http://i208.photobucket.com/albums/bb96/malekgambino/100_3717.jpg

jwfuhrman

08-06-10, 09:54

Buddy, that is one mean lookin beast. Same with you Rated21R.

Heres my Form 1 build - painted with Rustoleum "Dark Taupe", scuffed up with a wire brush to take the shine off as best as I could

http://i6.photobucket.com/albums/y201/paintballaddict/SBR-1.jpg

BCM 11.5in upper
10in Troy MRF
MIAD
ACS
MBUS
A2 Hider
BAD Lever
Tangodown QD Grip
Magpul ASAP plate
EOTech 512

jklaughrey

08-06-10, 15:27

11.5 BCM Barrel
BCM 1.0 Comp.
Vltor Casv-S handguard
Troy QD stubby VFG
Troy BUS F/R
Surefire G2 Led w/Vltor QD mount
DD rail mounted sling loop-(hard to find lately)
Magpul MOE furniture
MS2 Sling
BCM/Vltor Mod4 CH
Aimpoint H-1 with ADM Casv lower 1/3 mount-(thanks for the assist Grant).

jklaughrey

08-06-10, 15:27

deleted

usmcvet

08-06-10, 17:23

I just added the Vltor IMOD to my Noveske SBR and I am impressed with the new design....they really nailed it.

http://i5.photobucket.com/albums/y198/buddyhoohaw/Noveske/N4-01.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/Noveske/N4-02.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/Noveske/N4-03.jpg

I have an M300a on order to replace my old G2 in Vltor mount.

Cheers

Buddy

Awesome SBR. What optic is that and what kind of mag release is that?

Thanks.

buddyhoohaw

08-06-10, 19:10

Thanks man. Optic is Gen II Elcan Spectre DR 1-4x (SOCOM FDE variant) and the ambi mag release is KAC. I have 2 of the KAC ambi mag release units and they are very smooth....great product.

Cheers

usmcvet

08-06-10, 19:32

Thanks for the info.

RetreatHell

08-06-10, 21:31

My new BCM 12.5" Kino! I bought it around a month and a half ago now, but didn't want to post any pics until I shot it a little first.

http://i685.photobucket.com/albums/vv219/RetreatHell/BCM%20Kino%20SBR/DSCF1687.jpg

http://i685.photobucket.com/albums/vv219/RetreatHell/BCM%20Kino%20SBR/DSCF1703.jpg

Definitely not the best pics in the world, I just took 'em on my back patio with my cheapo camera. I eventually get some better ones down the road sometime with my Canon.

buddyhoohaw

08-06-10, 21:58

Nicely done! The Kino looks great. Did you mount the ATPIAL aft of the SR07 switch for balance or ergonomics?

Cheers

Agile53

08-06-10, 22:54

Paul in addition to Buddy's ATPIAL question, are you running a mini-Scout or full size?

If mini what are your thoughts on it & whose mount, a DC or GS? Buddy I saw you have one inbound, myself also.

Titleist

08-06-10, 23:41

I think the DCC mount is great, but the GS mount is just the tits! It's fantastic.

That's an M300 scout.

RetreatHell

08-06-10, 23:52

Okay, I'm confused here. I just wrote out a well thought-out and somewhat lengthy (for a pic thread) response to Buddy's question, complete with another picture, and now it's not here. WTF? Either it was erased, something screwed up, or my dumbass hit "Preview" and saw it and then closed it out before hitting "Post."

I think it was the latter... shit.:mad: So here I go again.

Buddy- Thanks man! I'm loving it thus far, and tomorrow night I'm going to another night vision shoot with friends, so I'll be running the PEQ-15, Aimpoint T-1 with PVS-14 mounted behind it, and the Surefire can. Should be pretty fun!:D

As for your question, it was for both, really. I can't have a really front-heavy carbine and shoot/run it the way I do. If it's too heavy, due to me being a paraplegic and not having those crucial ass and leg muscles, I'll fall forward when I shoulder the gun... not good. So I mounted the PEQ as far back as I reasonably could without having to move my T-1 back more than 1 rail notch.

But on the other hand, ergonomics is very important to me too. Before I had the dual pressure pad (SF white light and ATPIAL), it was really hard to feel around for the big "Fire" button on top of the PEQ-15 with my support hand at night, so the pad is a godsend. And sometimes I have to mount something far forward, like the Surefire light. Can't exactly mount it at the rear of the rail... well I guess I could, but it would be pretty stupid:p

Agile- As Titleist said, it's the M300 mini-scout. I think it's pretty much perfect for everyone. It gives the right amount of light for up close, and is great for lighting up a target at 100 yards with ease. I think the M300 and the X300 are awesome lights for carbines!

I'm using the Larue mount right now simply because I only have ONE m300 light currently, so I need to be able to quickly and easily switch it between different carbines. Once I get another one though, it's going in a DCC mount for sure. I love the low profile it provides by bringing the light in so close to the "pocket" of the rail like that! Very cool!

Pic thread:

http://i685.photobucket.com/albums/vv219/RetreatHell/BCM%20Kino%20SBR/DSCF1729.jpg

God these pics of my Kino are really nasty!! I should've taken the time to use the damn good Canon camera:mad:

geezerbutler

08-07-10, 00:26

Old/New

Old Colt 6933 with new I-Shot case

A 10.5" SBR will definitely fit better, but the 11.5 with long ass AAC blackout mount does fit.

To get it to fit I took off the E-mod Stock, and taking off the sling mount from the rec. ext. tube would allow the stock to close completely and make it fit a little better still.

The best fit IMO is with a 20 Rnd mag. Didn't even really fool with trying to fit it in with the 30 Rnd.

30 rnd. may fit but will be a PITA to deploy.

Will have a 10.5 " upper back next week and it will make it's home inside the I-shot.

http://lh6.ggpht.com/_JAPdm6GhhJM/TFzq0WFoZvI/AAAAAAAABn4/LhUakuHDKuA/s800/IMG_2296.JPG

HK51Fan

08-08-10, 00:53

LMT MK18 clone (on my Colt SBR lower, waiting for my LMT lower w/ MK18 engraving to be approved)
http://i640.photobucket.com/albums/uu123/__hellbound__/807d360c.jpg

LMT MK18 clone lower (engraving by Ident Marking)
http://i640.photobucket.com/albums/uu123/__hellbound__/29890_1363441923745_1162525353_30874382_4082880_n.jpg

Colt M4A1 SOCOM (playing around with LT handstops and light)
http://i640.photobucket.com/albums/uu123/__hellbound__/8e3c6298.jpg

GSG-5P SBR
http://i640.photobucket.com/albums/uu123/__hellbound__/d8633aa0.jpg

GSG-5P SBR w/ Gemtech Raptor II
http://i640.photobucket.com/albums/uu123/__hellbound__/39806_1411048473879_1162525353_30990023_1504513_n.jpg

Wife & her 11.5" BCM BFH, Stealth upper, Tom Sawyer custom lower
http://i640.photobucket.com/albums/uu123/__hellbound__/4a2bc5db.jpg

http://i640.photobucket.com/albums/uu123/__hellbound__/c8154143.jpg

Your wife sure does have a pretty kitty!! :eek:

TonyM

08-08-10, 13:35

LMT 10.5 upper
Tactical Innovations SBR lower
http://i928.photobucket.com/albums/ad123/fatdog57/LMT%20SBR%20105/AR-105-LMT008.jpg

geezerbutler

08-09-10, 19:28

I'm just now getting around to shooting this thing.

FCG Pins started walking out on me the other day. Not sure if it was a fluke or what, probably will go ahead and get the KNS set?

Noveske N4 10.5 SBR w/ Larue 9.0 Larue LT-110 Eotech Mount, magpul MBUS, Magpul trigger guard.

http://lh6.ggpht.com/_JAPdm6GhhJM/TGCbJzza0JI/AAAAAAAABo0/22CJP0Ta8Fo/s800/IMG_2550.jpg

adh

08-09-10, 19:48

Now

http://i226.photobucket.com/albums/dd192/adh_adh/BCM.jpg

Before

http://i226.photobucket.com/albums/dd192/adh_adh/BCM115004.jpg

Luke_Y

08-10-10, 06:45

I'm just now getting around to shooting this thing.

FCG Pins started walking out on me the other day. Not sure if it was a fluke or what, probably will go ahead and get the KNS set?

Noveske N4 10.5 SBR w/ Larue 9.0 Larue LT-110 Eotech Mount, magpul MBUS, Magpul trigger guard.

You may already be on top of this, but. Make sure that the hammer spring is installed properly. (pic clipped from Quib) BTW, Nice blaster :)

http://farm5.static.flickr.com/4004/4568913055_ec2e91c00a_o.jpg

bleaman225

08-10-10, 09:56

GeezerButler, how do you like the AAC Brakeout with that 10.5 barrel?

I have a 10.5 Noveske upper and I just bought a M4-2000, I want the Blackout but I dont want to sandblast the guts of my can so I've been leaning towards the Brakeout...

Awesome gun BTW

http://lh6.ggpht.com/_JAPdm6GhhJM/TGCbJzza0JI/AAAAAAAABo0/22CJP0Ta8Fo/s800/IMG_2550.jpg

geezerbutler

08-10-10, 19:02

You may already be on top of this, but. Make sure that the hammer spring is installed properly. (pic clipped from Quib) BTW, Nice blaster :)

http://farm5.static.flickr.com/4004/4568913055_ec2e91c00a_o.jpg

With regards to the hammer spring, I checked it and it was installed correctly. It was a factory built lower so I didn't expect to see it it backwards , but I guess anything can happen.

If the pins are walking out does that mean something is out of spec with the pins or the lower? The gun was brand new/unfired when it happened on my first outting.

GeezerButler, how do you like the AAC Brakeout with that 10.5 barrel?

I have a 10.5 Noveske upper and I just bought a M4-2000, I want the Blackout but I dont want to sandblast the guts of my can so I've been leaning towards the Brakeout...

Awesome gun BTW

Haven't shot it with the brakeout yet. I got it for that same reason, maybe a bit less wear and tear on the suppressor.

I still think you would have to shoot a whole lot to wearout or really degrade the performance of the M4-2000 with either mount. I also went with the Breakout because it is a little shorter so this SBR fits better than an 11.5 with a Blackout in my IShot case

az doug

08-10-10, 21:26

If someone bent the hammer springs to lighten the trigger pull the trigger pin could walk out.

ETA: Also, if a light hammer spring was used that could cause the same result.

geezerbutler

08-10-10, 21:38

Sorry to go OT.

Hmmm...That brings up someting I've never thought of until now.

When storing rifles for long periods , is it smart to store with the hammer forward?

If someone knows of a nother thread on this type topic please provide me a link ;)

As far as the hammer spring being tweaked, it would have to have been done at Noveske when it was built.

If someone bent the hammer springs to lighten the trigger pull the trigger pin could walk out.

ETA: Also, if a light hammer spring was used that could cause the same result.

MCASSgt New River

08-12-10, 09:41

My son and a few toys.
http://i42.photobucket.com/albums/e334/BADAZZ4USMC/DG.jpg

bleaman225

08-12-10, 12:18

[SIZE="2"]Haven't shot it with the brakeout yet. I got it for that same reason, maybe a bit less wear and tear on the suppressor.

I still think you would have to shoot a whole lot to wearout or really degrade the performance of the M4-2000 with either mount. I also went with the Breakout because it is a little shorter so this SBR fits better than an 11.5 with a Blackout in my IShot case

I'm not overly concerned about shooting out the M4-2000. Just figured it can't hurt to throw a baffle in there before the can. Enjoy the gun, hope your pins stop walking out on ya. That's a nice case you have BTW.

geezerbutler

08-12-10, 20:55

I caught a large poplar tree on fire today when shooting barricade against it with the Noveske 10.5 SBR with the AAC Brakeout.

Just kidding, although it did leave some serious blaster marks on the tree...think Star Wars

I shot M855 and XM193 through it.

The brakeout was like a mini-flashbang in terms of concussion and candle power.

The very 1st shot had would have blinded me permanently, had it not been in the day time. :p

I've never had anything other than A2 and AAC Blackout FH/FS so
this is my first brakey type muzzle device.

Shot some suppressed as well and it did fine. AKA no baffle strikes.

I can see the merits of the breakeout on a 14.5 ish upper for sure.

I just wanted a Non-blackout for one of my rifles.

Did I mention that I really like this thing?

Photo is soft to begin with and Picasa made it even worse. Oh well, the post needed a pic!

Canon T2i handheld 1/5 @ F5.6 ISO 1600 in case you were wondering.

http://lh3.ggpht.com/_JAPdm6GhhJM/TGS8AqewunI/AAAAAAAABqA/HVtQz6vF4Pw/s800/IMG_2677.jpg

HK51Fan

08-12-10, 23:18

My son and a few toys.
http://i42.photobucket.com/albums/e334/BADAZZ4USMC/DG.jpg

What's the story behind the AK on the right with the HK forearm? It looks the offspring after an AK raped an MP5!:p

jwfuhrman

08-13-10, 08:06

looks kinda like a HK93 with a shorter barrel and a side folder

MCASSgt New River

08-13-10, 08:56

What's the story behind the AK on the right with the HK forearm? It looks the offspring after an AK raped an MP5!:p

This SBR is a Red Jacket Firearms model ZK-MR with a short gas pistol system, a la Krink, and a MAA folding stock in 7.62x39

looks kinda like a HK93 with a shorter barrel and a side folder

HK's are in my future plan...hmmm maybe I can dress it up a little more.

tiger seven

08-17-10, 10:19

New ACOG TA33G-H. I got it for my Noveske Recce, but I like it on my 10.5" LMT too. It sucks I can't afford another one! :)

http://i3.photobucket.com/albums/y82/zulu15/LMT_ACOG.jpg

Derek

Boomer

08-17-10, 10:53

Very nice looking kit. How do you like the TA33G-H? I've been looking for one but everyone is out of stock!

tiger seven

08-17-10, 11:41

Very nice looking kit. How do you like the TA33G-H? I've been looking for one but everyone is out of stock!

I'm REALLY liking it. Spent over a year researching optics and finally decided on that one, and then it took me a while to find one available. Got it through the Equipment Exchange here for a fantastic price. Well worth the wait. Good luck in your search!

Derek

AggiePhil

08-20-10, 10:30

Noveske N4 10.5 SBR w/ Larue 9.0 Larue LT-110 Eotech Mount, magpul MBUS, Magpul trigger guard.

http://lh6.ggpht.com/_JAPdm6GhhJM/TGCbJzza0JI/AAAAAAAABo0/22CJP0Ta8Fo/s800/IMG_2550.jpg
How come on yours, the forward assist housing looks normal, but the one on the Noveske website runs all the way up to the back of the ejection port? Also, did you just remove and sell the Noveske handguard that came with it or what?

http://noveskerifleworks.com/imimg/105-556_6d.jpg

geezerbutler

08-20-10, 11:06

That's the VLTOR Upper in your photo, not the standard "M4"

This one came from Noveske when he still used LaRue rails.

AggiePhil

08-20-10, 11:12

Oh. Darn. I actually like the standard upper and LaRue rails. I don't guess you can get him to use either anymore?

ColdDeadHands

08-20-10, 11:45

Oh. Darn. I actually like the standard upper and LaRue rails. I don't guess you can get him to use either anymore?

The Basic Uppers still have standard m4 uppers as far as I know...

geezerbutler

08-20-10, 11:51

Oh. Darn. I actually like the standard upper and LaRue rails. I don't guess you can get him to use either anymore?You could purchase the Noveske matched M4 Upper/lower set and then buy your own Novekse Barrel, GB, and LaRue Rails and either assemble it yourself or have a professional put it together for you.

This would give you the same upper for your resgistered SBR Lower.

Also they come up from time to time on ARFCOM and even here @ M4C in this factory Noveske configuration.

You'd also have a leftover Noveske lower ready for a future non-SBR build

Stephen_H

08-20-10, 11:54

Recent shot of my SCAR 16S CQC.

http://img.photobucket.com/albums/v342/stephen_101st/Gear/SCARCQC-10.jpg

Rated21R

08-20-10, 12:00

Recent shot of my SCAR 16S CQC.

http://img.photobucket.com/albums/v342/stephen_101st/Gear/SCARCQC-10.jpg

That is bad ass. :dirol:

jwfuhrman

08-20-10, 17:04

Kinda hard to follow Stephen with his SCAR CQB sexiness but he's my contribution. I want a optic of some kind, I have an EOTech now, it used to have a Aimpoint CompML2 on it, not really happy with either one.... maybe a Trijicon 1-4x24 but idk, what do you guys think

BCM 11.5in Upper
Troy 10in MRF
MBUS
Bushmaster Form-1 lower
MIAD
MOE Stock
BAD Lever

http://i6.photobucket.com/albums/y201/paintballaddict/SBR82010-2.jpg
http://i6.photobucket.com/albums/y201/paintballaddict/SBR82010.jpg

snaf

08-20-10, 17:55

my mod 1 clone

http://i372.photobucket.com/albums/oo167/avexsnaf/firearms/m1.jpg

Rated21R

08-20-10, 21:08

Sweep

08-21-10, 05:53

http://i48.photobucket.com/albums/f241/schornstinefager/PICT0200.jpg

buddyhoohaw

08-21-10, 07:39

http://i48.photobucket.com/albums/f241/schornstinefager/PICT0200.jpg

Nice work on the multicam job. Hydro-graphic or spray kit?

Cheers

Rated21R

08-21-10, 07:45

http://img594.imageshack.us/img594/8757/dsc0348o.jpg

McCheese

08-21-10, 08:14

I finally finished mine. I went the KISS route.

http://i982.photobucket.com/albums/ae301/SeamusMcPhisticuffs/613bbc36bb7169a6903bba25587985568055ce80.png

Parts list:

Spikes lower
CMT upper
Rock River LPK
Daniel Defense 10.3" barrel assembly
LMT BCG
Bravo Company gunfighter CH
KNS pins
Daniel Defense A1.5 rear sight
Magpul plastics/BAD

My hot pink countertops are better than yours.

Zeus

08-21-10, 08:40

Very nice KISS carbine!

Counter tops flashed me back to 1978... don't ask!

McCheese

08-21-10, 10:26

Counter tops flashed me back to 1978... don't ask!

That's only a year after I was born!

Sweep

08-21-10, 11:09

Nice work on the multicam job. Hydro-graphic or spray kit?

Cheers hydro-graphic done on moly kg 320 degree bake on base developed especially for the hydro process on all the metal parts

Zeus

08-21-10, 11:35

That's only a year after I was born!

Um, thanks for reminding me that I have kids in the Academy that were 2 yrs old when I started here :(

Zeus

08-21-10, 11:36

hydro-graphic done on moly kg 320 degree bake on base developed especially for the hydro process on all the metal parts

Sweep, nice work... I'm not fnd of the pattern, but always appreciate great work/execution.

Sweep

08-21-10, 11:52

we've been doing a lot of it lately and expect more as its being issued now and a lot of Sheriffs Offs are going that way

Fireglock

08-24-10, 22:39

11.5"

http://i4.photobucket.com/albums/y138/fireglock/DSC03506.jpg

DocHolliday01

08-25-10, 16:40

http://img340.imageshack.us/img340/1889/img1760t.jpg

http://img834.imageshack.us/img834/541/img1761c.jpg

Bgu301

08-26-10, 16:35

http://i263.photobucket.com/albums/ii155/Bgu301/SAM_0347.jpg

Tacteam369

08-26-10, 21:22

Form 1's just came back and now I get to be part of the "In" crowd...;)
http://i239.photobucket.com/albums/ff176/cflowner/IMG_0014.jpg

jsebens

08-27-10, 05:38

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs375.snc4/45865_833972445604_23324729_45003672_6691764_n.jpg

By the way, has anyone noticed that the OP misspelled "official" in the thread title?

From tip to tip (current config; changed a little since yesterday)
AAC Brake
BCM 11.5 BFH barrel
Noveske Switchblock (pinned)
DD 12.0 Lite Rail (cut back to 11" and milled for Switchblock)
KAC Micro front sight
Aimpoint T1 on KAC mount
KAC Micro 200-600m rear sight
LMT upper and BCG
BCM Gunfighter Mod3 Charging handle
Magpul XTM/ladder panels
Magpul MIAD
Magpul UBR
Magpul AFG
Surefire MiniScout on Danger Close Consulting mount

Dozer

08-27-10, 08:39

jsebens

08-27-10, 08:43

Thanks, bud.

BTW, I found the gun more comfortable when I put ladders on the sides...my hands are small enough that I need less bulk on the 3:00 and 9:00 rail so that I can get the bore control that I like.

Titleist

08-27-10, 09:34

http://blog.mrhacks.com/wp-content/uploads/2009/08/bk_tinyhands.jpg

It's okay man, no one is judging.

Jake, this came out great. Awesome work by The Gun Gallery. Really unique SBR setup.

Dozer

08-27-10, 10:16

jsebens

08-27-10, 10:19

When I want to hear a reply like that, I'll email Titleist. I depend on you to be my common sense, not my inner 12-year-old...Marines. Sheesh. :p

Boss Hogg

08-27-10, 10:27

Specs:
TOP: 12.5" Daniel Defense hammer forged barrel, Spikes SBR lower receiver with LWRC parts kit, Vltor VIS 10", Spikes nickel boron BCG. The LWRC trigger is without doubt the best out-of-the-wrapper combat trigger I've had.

BOTTOM: 12.5" Noveske "Crusader" stainless match barrel, Stag SBR lower receiver with Stag parts kit, LaRue 10", Spikes nickel boron BCG. That little handstop is made by Danger Close Consulting.....picked it up at Grey Group. LOVE the Vltor iMod.

http://i217.photobucket.com/albums/cc295/B055H0GG/DSCF0714_small.jpg

jsebens

08-27-10, 10:29

Very nice!

usmcvet

08-27-10, 10:34

Very nice!

Nice pair. I have a TLR1 light set up the same way on two guns and I keep burning through batteries while the are in their cases and moved around the lights keep coming on. I know I can pull the batteries but don't want to do that. Do you have the same issue?

Titleist

08-27-10, 10:46

When I want to hear a reply like that, I'll email Titleist.

HEEEEEEEYYYY!!:cray:

Boss Hogg

08-27-10, 10:47

Nice pair. I have a TLR1 light set up the same way on two guns and I keep burning through batteries while the are in their cases and moved around the lights keep coming on. I know I can pull the batteries but don't want to do that. Do you have the same issue?

Thanks for the compliments.

I can see your issue. I normally keep mine off the SBR. It pops on very easily, and would rather take the time to put it on than risk having the battery burn out.

adh

08-27-10, 12:27

12.5" Daniel Defense (top) and 12.5" Noveske (bottom).

http://i217.photobucket.com/albums/cc295/B055H0GG/DSCF0714_small.jpg

11" Larue rail on the bottom?

Nice set BTW

PIC Thread
http://i226.photobucket.com/albums/dd192/adh_adh/BCM.jpg

Boss Hogg

08-27-10, 12:55

It's actually a 10" - added details in OP.

kdcgrohl

08-27-10, 13:59

Info? 94 receiver? 40 or 10mm? Who put it together?:D

http://i263.photobucket.com/albums/ii155/Bgu301/SAM_0347.jpg

steb4680

08-27-10, 17:24

Here is my PS90 SBR. Converiondone by ESG Gunworks in Baytown, Texas. Cut the barrel sleave, barrel, recrowned and threaded the barrel in FN 12x1 metric thread. Still at my 07/SOT waiting for my form 4 to get back.

http://img210.imageshack.us/img210/868/guns2080.th.jpg (http://img210.imageshack.us/i/guns2080.jpg/)

http://img638.imageshack.us/img638/8107/guns2081.th.jpg (http://img638.imageshack.us/i/guns2081.jpg/)

Can someone help me post larger photos on here. I have tried and the Attatchment Manager will not work it says "upload of file failed" This is my first post on this board but I am on other forums and have not run into this trouble. :suicide:

usmcvet

08-27-10, 19:18

Thanks for the compliments.

I can see your issue. I normally keep mine off the SBR. It pops on very easily, and would rather take the time to put it on than risk having the battery burn out.

That is a good solution. I have mine on my HD and work guns. Thanks.

Bgu301

08-27-10, 21:03

Info? 94 receiver? 40 or 10mm? Who put it together?:D

Its a .40. Hk Bolt, Hk stock, semi-sef trigger group, hk ejector. Hk support tube, full auto bcg(us)...us barrel unfortunately, Led surefire. Parts count is just right...And it cycles TMJ reloads..Have shot 1k of them out of my g23 w/ no kaboom, and about 8 mags worth in this gun before I took the can off... I have considered a Bill springfield trigger job..but I have spent way too much money recently...

jwfuhrman

08-27-10, 21:37

http://i6.photobucket.com/albums/y201/paintballaddict/EAF_0052.jpg

HK51Fan

08-29-10, 22:22

Another pic of my N4 non-factory SBR, but all Noveske nonetheless, with a little KAC creamy goodness to boot.

Maybe I could like go shoot it or something .....

http://lh4.ggpht.com/_JAPdm6GhhJM/Sg4Wxjk3LMI/AAAAAAAABCA/c-NmfoSrvyA/s800/IMG_8269-1.jpg

I'm not familiar with the blue netting on the FH?

Sierrahotel83

08-29-10, 22:30

It is a protective cover... I have seen it on barrels several times....

Fireglock

08-29-10, 22:32

What he said.

http://i4.photobucket.com/albums/y138/fireglock/DSC02640.jpg

irish1111

08-31-10, 13:09

My department issue DPMS M4 w/ 10.5"
Magpul MOE furniture, BAD & ASP
Vortex Strikefire w/ LaRue mount
SF G2 w
BCM Gunfighter CH
PWS brake

Shoots great with no hiccups, so far. Headed to Magpul this weekend so it will get run hard. Taking a backup, just in case.

Goshen606

09-01-10, 23:27

http://i288.photobucket.com/albums/ll198/Goshen606/IMG_7377.jpg

Colt Lower Receiver
11.5” BCM upper receiver
Hogue grip
Troy Industries rear flip site, vertical mod grip and quad rail
Eotech EXPS-2 holosight with Optics Planet OPMOD modification
Surefire M600C Scout Light Weapon light
VLTOR mod stock

Adam Pini

09-02-10, 19:05

This upper is doomed for the EE since I have a LWRC M6A2 on the way. Or Ill just keep it for ground hog hunting

http://i213.photobucket.com/albums/cc69/84ragtop/SBR/IMG_0961.jpg

buddyhoohaw

09-03-10, 21:31

Recent pics taken with Gear Sector SF Scout mount. Note that left forward sling loop had to be removed in order to accomodate the bulb housing on the shorter 300a mini scout; 600 series scouts clear the loop. Danger Close mounts have the same aforementioned clearance issues.

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR010.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR011.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR012.jpg

Cheers

geezerbutler

09-03-10, 22:12

I'm not familiar with the blue netting on the FH?

Your post killed me.

I was perusing and then thought "hey, that's my floor and my photo":rolleyes:

Then I realized that it was my post and my rifle.

Soggybottomboy

09-06-10, 19:33

After 9 months of waiting for my stamp and 1 month of building, I'm very proud to submit pics of my first SBR.

Before, after, and one with the wife showing how good it's supposed to look.

LMT 10.5 upper
LMT Defender lower
Aimpoint H-1, Larue mount
Troy Rail
Magpul rail panels, MOE stock, RVG, PMag
Larue BUIS
Viking Tactics sling
Ergo grip

SBB

GLOCKMASTER

09-06-10, 19:43

shadow65

09-06-10, 19:51

Nice build!:D

NCSt8man1999

09-06-10, 21:47

very nice -- I like it!!

TRUST8383

09-07-10, 19:08

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/DDM4/MK18/64747e01.jpg

Cincinnatus

09-08-10, 09:29

http://img340.imageshack.us/img340/1889/img1760t.jpg

http://img834.imageshack.us/img834/541/img1761c.jpg

How's the brake do for your SBR? I'm looking in to putting a brake on a 10.5" barrel, but it seems at least for the Surefire brand brakes and comps they are not reccommended for barrels shorter than 12" and in some cases 14.5"

DocHolliday01

09-08-10, 10:26

How's the brake do for your SBR? I'm looking in to putting a brake on a 10.5" barrel, but it seems at least for the Surefire brand brakes and comps they are not reccommended for barrels shorter than 12" and in some cases 14.5"

It is LOUD, but very effective. 3-8 round bursts with this upper on a FA lower are very controllable. If you shoot indoors I would look into something else. Blast and noise aren't quite as bad outside but it is no fun to shoot inside or even under awnings.

evil_nadman

09-08-10, 20:09

It is LOUD, but very effective. 3-8 round bursts with this upper on a FA lower are very controllable. If you shoot indoors I would look into something else. Blast and noise aren't quite as bad outside but it is no fun to shoot inside or even under awnings.
Yeah I found that out first hand out on a range shooting some guys AR Pistol with a PWS brake on it. I had ear pro and it still felt like some one was sticking needles into my Tympanic Membrane.... :eek:

Failure2Stop

09-13-10, 05:08

By the way, has anyone noticed that the OP misspelled "official" in the thread title?

Got it.

tumbler

09-16-10, 01:31

http://img21.imageshack.us/img21/5180/pof.jpg

Stickman

09-23-10, 00:10

http://stickman.rainierarms.com/galleries/AAC/CTML0111-1024-Stick.jpg

Rated21R

09-23-10, 08:58

http://stickman.rainierarms.com/galleries/AAC/CTML0111-1024-Stick.jpg

That's a great way to start the morning. :D

jc75754

09-23-10, 14:39

http://img139.imageshack.us/img139/5316/picture1602eg7.jpg

May I ask what caliber that is?

adh

09-23-10, 15:59

May I ask what caliber that is?

Thats a .22 magazine

usmcvet

09-23-10, 20:16

Before, after, and one with the wife showing how good it's supposed to look.

https://www.m4carbine.net/attachment.php?attachmentid=6019&d=1283819421

I don't know. Awesome set up. I like the before and after photos. But! It looks like you might have already lost your gun to your wife!

smullen

09-23-10, 23:37

I love this thread, makes me want an SBR so bad!!!

Bgu301

09-24-10, 20:35

http://i263.photobucket.com/albums/ii155/Bgu301/540422359_photobucket_695_.jpg

http://i263.photobucket.com/albums/ii155/Bgu301/540422359_photobucket_694_.jpg

jwfuhrman

09-25-10, 12:27

Updated

http://i6.photobucket.com/albums/y201/paintballaddict/100_1157.jpg
http://i6.photobucket.com/albums/y201/paintballaddict/100_1158.jpg

lonewolf21

09-25-10, 20:54

I got the bug!

usmcvet

09-25-10, 20:59

I got the bug!

Run with it. The effort and money are well worth it. I wish I did not wait as long as I did.

sweatpants

09-26-10, 01:34

http://i52.tinypic.com/b50190.jpg

http://i56.tinypic.com/i7930w.jpg

http://i52.tinypic.com/eta4ci.jpg

Adam Pini

09-26-10, 18:18

http://i213.photobucket.com/albums/cc69/84ragtop/SBR/IMG_1038.jpg

http://i213.photobucket.com/albums/cc69/84ragtop/SBR/IMG_1037.jpg

kdcgrohl

09-28-10, 12:51

http://i627.photobucket.com/albums/tt358/kdcgrohl/firearms/IMG_20100924_180357.jpg

SuicideHz

09-28-10, 13:09

That makes me HARD! Wow. Nice gun!!!!

An older pic of my Mk18Mod1 clone with 12.5" Centurion Arms barrel (for G5 clearance)http://farm5.static.flickr.com/4087/5033378697_b88999c08d_b.jpg

Recent pics taken with Gear Sector SF Scout mount. Note that left forward sling loop had to be removed in order to accomodate the bulb housing on the shorter 300a mini scout; 600 series scouts clear the loop. Danger Close mounts have the same aforementioned clearance issues.

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR010.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR011.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR012.jpg

Cheers

SuicideHz

09-28-10, 13:24

Traded the H-1 for the new 553, removed the ASAP plate and installed a Noveske QD endplate, removed panels, installed TD QD Stubby, sold DD sights and bought this set of NEW Troys for $120 :p

http://farm5.static.flickr.com/4128/5034034140_2db03f3849_b.jpg

Here it resting against the Bayliss Replica Duc:

http://farm5.static.flickr.com/4109/5034032960_2986898fd0_b.jpg

TRUST8383

09-29-10, 16:48

LMT FULL 10.5" UPPER
LMT DEFENDER 2000 LOWER
LMT 2-STAGE TRIGGER
DD MK18 RIS II
EOTECH 553 A65 TAN
TROY BUIS
TD VFG, MAGPUL MIAD/BAD LEVER, LMT SOPMOD
NOVESKE QD ENDPLATE
BLUEFORCE GEAR UDC SLING
SUREFIRE M300A MINI SCOUT
GEAR SECTOR OFFSET MOUNT

(Suppressor & comp TBD)

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/DDM4/MK18/7fbe84f6.jpg

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/DDM4/MK18/8324a52e.jpg

Fireglock

09-30-10, 14:21

http://i4.photobucket.com/albums/y138/fireglock/SBR/DSC03585.jpg

http://i4.photobucket.com/albums/y138/fireglock/SBR/DSC03560.jpg

http://i4.photobucket.com/albums/y138/fireglock/SBR/DSC03579.jpg

jwfuhrman

10-02-10, 15:35

Update to the last pic

Sold the 11.5in BFH BCM upper for my newest upper.

http://i6.photobucket.com/albums/y201/paintballaddict/100_1168.jpg

12.5in SS410 BCM upper
Troy MRF-MX 10in
MagPul MOE Stock, MIAD grip, MBUS, TangoDown Stubby Vertical Grip
Burris 1-4x24 XTR
BattleComp 1.0

vchiera

10-03-10, 11:13

http://img707.imageshack.us/img707/4985/imag0050z.jpg (http://img707.imageshack.us/i/imag0050z.jpg/)

Top: (Plinker)

16-HBAR 1x9 Del-ton (DTI)
UTG RAIL
Mako Grip
CAA-Stock

Bottom: (SBR)

10.5 LMT MK18 upper
LMT AUTO BCG
1x7 CHF barrel
YHM Free Float Rail
EoTech 511
Magpul MOE
Tangodown Battle Grip
SPIKES'S St-15 lower receiver
Standard Trigger group Milspec
Low Pro gas block being added soon....

Any recommendations on BUIS? Was looking at the Magpul MBUS. Your thoughts are appreciated.

usmcvet

10-05-10, 13:58

https://www.m4carbine.net/picture.php?albumid=302&pictureid=1444

https://www.m4carbine.net/picture.php?albumid=302&pictureid=1445

https://www.m4carbine.net/picture.php?albumid=302&pictureid=1450

https://www.m4carbine.net/picture.php?albumid=302&pictureid=1449

https://www.m4carbine.net/picture.php?albumid=302&pictureid=1446

Both of these cases are very well made and made here in America. The sneaky bag is my new choice. It offers more storage and looks less like a rifle bag. The bottom pouch in the sneaky bag holds an Eagle bandoleer with 4 Pmags and 2 Glock 22 mags.

Rider79

10-05-10, 15:24

https://www.m4carbine.net/picture.php?albumid=302&pictureid=1450

https://www.m4carbine.net/picture.php?albumid=302&pictureid=1449

What the story on that sling mount for the MOE?

Zeus

10-05-10, 18:54

I'm not usmcvet, but it's from Impact Weapons Components... they have a sweet setup for the the MS2 slings too.

usmcvet

10-05-10, 19:02

What the story on that sling mount for the MOE?

Glad you asked. I wanted to do a little review on it the mount. I just found it another member here had a different version on a gun of his and I asked about it.

Here is the link. I have the Rotation Limited Quick Detach Sling MOUNT-N-SLOT™ they also make a few others for the MOE hand guards. Shipping was quick and the package is actually folded in such a way that it can be mailed out in it's package. It is pretty smart actually and saved them money for shipping. I think the tag said something like $1.73 it. They are also made in Colorado. Give them a try. I am very happy with mine. It sticks out a little father than I would like but it works very well and is made very solid.

http://store.impactweaponscomponents.com/roliqudeslmo.html

usmcvet

10-05-10, 19:04

I was checking my PM's Zeus beat me to it. Zeus was the member who told me where to get the mount.

Zeus

10-05-10, 19:25

We'll not turn this any more into an advertising campaign for these "cat's ass" mounts than it's already become, so here's a "bad" SBR pic of my 11.5" :

http://i303.photobucket.com/albums/nn133/Zeusmotorworks/100_3349-1.jpg

:p

Scotter260

10-05-10, 19:41

Arrived today:

http://img.villagephotos.com/p/2008-3/1303584/Alite1.JPG

Now if I just update the optic and rail, having a lightweight might actually serve a purpose.

usmcvet

10-05-10, 19:59

Scotter260

I love it man you already have her in the dirt.

MadDog

10-06-10, 08:46

My latest SBR is a VZ61 Scorpion. Here it is with two of it's bigger brothers, a 7.5" Noveske Diplomat in 6.8 SPC and a 10.5" XCR in 556

MadDog :big_boss:

http://img840.imageshack.us/img840/5016/skorpion003.jpg

http://img840.imageshack.us/img840/1290/skorpion007.jpg

http://img840.imageshack.us/img840/2609/skorpion008.jpg

http://img840.imageshack.us/img840/5196/skorpion011.jpg

http://img840.imageshack.us/img840/8915/skorpion015.jpg

variablebinary

10-06-10, 11:34

My latest SBR is a VZ61 Scorpion. Here it is with two of it's bigger brothers, a 7.5" Noveske Diplomat in 6.8 SPC and a 10.5" XCR in 556

MadDog :big_boss:

When will you make it back to UT so I pretend I am in with PLO with the Scorpion?

MadDog

10-06-10, 13:07

VB: As soon as someone opens a decent Cigar Shop in UT I will come back for a visit with some of my toys.

MadDog :big_boss:

Scotter260

10-08-10, 19:49

At the range today with my mismatched V-TAC light mount.

http://img.villagephotos.com/p/2008-3/1303584/ABCMSBR1.JPG

decodeddiesel

10-08-10, 19:51

http://i19.photobucket.com/albums/b200/decodeddiesel/MK18/IMG_6723.jpg

ETA: Specs

LMT MK18 MOD0
LMT 10.5" Upper
LMT SBR'd Lower
LMT BCG
LMT SOPMOD
LMT Rear Sight
Colt A2 Grip w/gapper
Dieter CQD Sling Plate
KAC RAS
KAC VFG
Aimpoint T-1 in Larue Mount
Surefire M600C

My mission on this build was to create a semi-automatic version of what I think is the ultimate CQB AR rifle, the MK18 MOD0. I have used as many NSN'd parts as possible. The Upper, RDS, White Light, RAS, CQD Plate, etc. are all NSN'd items.

The upper has just about 2000 rounds, cleaned once, frequently lubed, no malfunctions or stoppages of any kind. This is by far my favorite AR, and possibly my favorite weapon.

sweatpants

10-14-10, 19:43

http://i51.tinypic.com/1zo9o51.jpg

http://i52.tinypic.com/25a19gp.jpg

http://i54.tinypic.com/2w4xms3.jpg

bsmith_shoot

10-19-10, 09:44

http://i51.tinypic.com/1zo9o51.jpg

http://i52.tinypic.com/25a19gp.jpg

http://i54.tinypic.com/2w4xms3.jpg
Very nice kit, what did you use to texture the grips and covers?

sweatpants

10-20-10, 00:12

Very nice kit, what did you use to texture the grips and covers?

I bought a soldering iron from Walmart and have used it to stipple this and about a million other things. It costs 10 bucks and has a yellow grip. Best gun investment yet.

bsmith_shoot

10-20-10, 21:11

I bought a soldering iron from Walmart and have used it to stipple this and about a million other things. It costs 10 bucks and has a yellow grip. Best gun investment yet.

Thanks! Gonna get one.

vchiera

10-24-10, 09:59

http://img149.imageshack.us/img149/6899/40140159804204179015581.jpg (http://img149.imageshack.us/i/40140159804204179015581.jpg/)

Components:
LMT 5.56 1x7 CL upper w/ FA BCG mk18mod0 10.5"
YHM Free Float Battle Rail
JP Brake
Duracoated FDE Spike's ST-15 Lower
Del-ton Pin spring kit
mp15 (s&w) Fire Control group
Brownells tactical bolt catch
Daniel Defense sling mount
Tango Down pistol grip
Magpul MOE Stock FDE
BUIS (Yet to be installed, suggestions? ):big_boss:

RAM Engineer

10-24-10, 10:15

Components:
LMT 5.56 1x7 CHF upper w/ FA BCG mk18mod0

When did LMT start selling cold hammer forged barrels?:confused:

vchiera

10-24-10, 21:21

When did LMT start selling cold hammer forged barrels?:confused:

They never have, I don't know why. But, I intended to write CL 4150, lol..... Good catch.:laugh:

Adam Pini

10-26-10, 22:43

Took some pictures of my sbr and my future 2nd sbr. Im playing around with some fde parts. Im waiting on my fde moe stock

http://i213.photobucket.com/albums/cc69/84ragtop/SBR/IMG_1061.jpg

http://i213.photobucket.com/albums/cc69/84ragtop/SBR/IMG_1062.jpg

http://i213.photobucket.com/albums/cc69/84ragtop/SBR/IMG_1063.jpg

Fireman1291

10-27-10, 11:37

Detailed pics please:cool:

http://i19.photobucket.com/albums/b200/decodeddiesel/MK18/IMG_6723.jpg

ETA: Specs

LMT MK18 MOD0
LMT 10.5" Upper
LMT SBR'd Lower
LMT BCG
LMT SOPMOD
LMT Rear Sight
Colt A2 Grip w/gapper
Dieter CQD Sling Plate
KAC RAS
KAC VFG
Aimpoint T-1 in Larue Mount
Surefire M600C

My mission on this build was to create a semi-automatic version of what I think is the ultimate CQB AR rifle, the MK18 MOD0. I have used as many NSN'd parts as possible. The Upper, RDS, White Light, RAS, CQD Plate, etc. are all NSN'd items.

The upper has just about 2000 rounds, cleaned once, frequently lubed, no malfunctions or stoppages of any kind. This is by far my favorite AR, and possibly my favorite weapon.

CAG - 516

10-27-10, 18:17

sweatpants very very nice rifle.

decodedd im with Fireman id really like to see some more detailed pics.

decodeddiesel

10-27-10, 21:07

Detailed pics please:cool:

sweatpants very very nice rifle.

decodedd im with Fireman id really like to see some more detailed pics.

Sure thing guys!

http://i19.photobucket.com/albums/b200/decodeddiesel/MK18/IMG_6710.jpg

http://i19.photobucket.com/albums/b200/decodeddiesel/MK18/IMG_6718.jpg

Saving up for an NT4-QDSS for her.

CAG - 516

10-27-10, 21:48

Sweettttt, thanks for posting some more pix that quickly decodedd.

Im a huge Mk18 fan and ur MOD 0 is perfect.

As soon as i get a camera that i can take some decent pix with ill post some of my SBR.

Stats:

Stag Arms Stag-15 lower
10.5" LMT upper
9" DD Lite rail
CTR stock
MIAD Grip
XTM Rail Panels
MBUS BUIS
RVG foregrip
KX3 Can
EO-Tech 551 (had for a few years)
Aimpoint 3x Magnifier

I actually switch between the 551 and a T-1 Micro depending on my mood for the day lol.

Like i said, pix soon to follow :D

Fireman1291

10-28-10, 18:30

MAN THAT IS SEXY!

Just got my Noveske N4 stripped lower in today....time to build my 1st SBR on my trust.

Plans are to do a MK18 but with some changes.

Parts:

Noveske lower
DD Parts kit
Tango down grip
Vltor Imod kit
KNS anti rotation pins (mod2)
BADASS ambi saftey kit

Noveske 10.5 Upper(with troy/noveske BUIS, and bolt/carrier)
AAC 51T brake
KAC drop in rail system
QD tango down FVG
Surefire mini scout
Eotech 511 A65
Gear sector 2 pt sling
Gear sector QD rail sling mount
Noveske QD sling endplate
AAC M4-2000 MOD08

:big_boss:I already have the suppressor/eotech and some of the lower parts.....going to build and register the lower next week and then buy everything but the upper untill my stamp comes back....:laugh:

CAG - 516

10-28-10, 18:45

Fireman now that sounds like a very nice build, cant wait to see some pix once its all built.

I did forget a few things with mine.....

Magpul MS2 Sling or Blue Force Vickers sling
Troy Folding Battle Sights (if not using MBUS)
DD QD Rail Sling mount
Insight M6x Tac Laser/Light

Surefire and Magpul BAD Lever soon to come as well.

buddyhoohaw

10-31-10, 15:39

Here's my SCAR CQC with Branham rail....

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/Branham-01.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/Branham-02.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/Branham-03.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/Branham-04.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/Branham-05.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/Branham-06.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/Branham-07.jpg

Cheers

AllanRR

11-01-10, 00:50

Here's my SCAR CQC with Branham rail....

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/Branham-01.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/Branham-03.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/Branham-04.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/Branham-05.jpg

Cheers

Was never really a fan of the SCAR...until now. A short barrel really does bring everything together nicely.

A

kratosx9

11-01-10, 14:44

The latest setup...
http://img.photobucket.com/albums/v477/kazuyajin69/100_9304.jpg

m249saw

11-01-10, 18:38

Sweet Jesus buddyhoohaw, that's beautiful.

GTF425

11-01-10, 19:46

Just got the Form 4 back last week. I bought this rifle back in February from a seller in Texas. Took FOREVER for the paperwork to come back. Unfortunately, not me shooting given I'm on the other side of the continent at this time. The UMP conversion was done by HDPS. I'll have better shots and a personal range report when I get to handle it in person.

http://i802.photobucket.com/albums/yy309/GTF425/DSCN1890.jpg

HK416 upper on Spike's Tactical lower. This one only took 8 weeks from mailbox to mailbox.

http://i802.photobucket.com/albums/yy309/GTF425/DSC00007-1.jpg

CAG - 516

11-01-10, 21:23

kratos amazing looking rifle, really like the setup.

How do u like the CMORE???

Ive been considering picking one up but would like some first hand opinions.

Seeing it on ur rifle pretty much made my decision up though lol.

Just picked up a ACS yesterday, just waiting for it to be shipped.

Gonna do a Black/DE setup basically the same as urs.

Ak44

11-01-10, 21:51

http://img12.imageshack.us/img12/1170/img0155f.jpg

http://img178.imageshack.us/img178/2503/img0153an.jpg

http://img521.imageshack.us/img521/2091/img0152lr.jpg

http://img24.imageshack.us/img24/9158/img0151w.jpg

AggiePhil

11-01-10, 21:55

HK416 upper on Spike's Tactical lower. This one only took 8 weeks from mailbox to mailbox.

http://i802.photobucket.com/albums/yy309/GTF425/DSC00007-1.jpg

Where did you get an HK416 upper??? :eek:

GTF425

11-01-10, 21:56

Where did you get an HK416 upper??? :eek:

Gunbroker.

AggiePhil

11-01-10, 21:58

How much?

GTF425

11-01-10, 22:01

How much?

PM inbound.

rushca01

11-04-10, 14:01

12.5 SBR

BCM Barrel
11" Larue Rail
LMT Lower

http://i391.photobucket.com/albums/oo356/rushca01/DSC00410.jpg

ETA: Becuase I have gotten several Pms the sling mount behind castle nut is a Tango Down PR4

tobasco

11-04-10, 18:50

what kinda light in that on the scar?

adh

11-04-10, 19:08

what kinda light in that on the scar?

Looks like an SF M300 scout

kratosx9

11-07-10, 19:45

dble post

J_Hernandez

11-07-10, 19:57

Looks like an SF M300 scout

On a Gear Sector Mount:D

CAG - 516

11-09-10, 21:11

rush really like ur rifle, very nice setup.

What kinda sling is that???

usmcvet

11-09-10, 21:26

rush really like ur rifle, very nice setup.

What kinda sling is that???

Looks like a Vickers BFG (Blue Force Gear) 2 point sling.

http://www.blueforcegear.com/products2.cfm?id=2

jwfuhrman

11-12-10, 18:24

Finally got a chance to sight in my BCM KINO build. Shoots REAL damn good - bipod is on just to make it easier to sight in, plus waiting on my EOTech 511.A1 to get back from L-3 for repair work.

http://i6.photobucket.com/albums/y201/paintballaddict/100_1195.jpg
http://i6.photobucket.com/albums/y201/paintballaddict/100_1194.jpg
http://i6.photobucket.com/albums/y201/paintballaddict/100_1196.jpg

m249saw

11-12-10, 19:16

http://i5.photobucket.com/albums/y158/m249saw/sbr.jpg

Yay, I can finally contribute to this thread!

usmcvet

11-13-10, 00:48

Saw

Nice Stock on that SBR :D glad you have it up and running.

m249saw

11-13-10, 11:39

Saw

Nice Stock on that SBR :D glad you have it up and running.

Thanks again for the trade. It balances it out perfectly.

usmcvet

11-13-10, 14:57

It worked out great for both of us. What rail and light mount are you using?

m249saw

11-13-10, 15:18

Surefire G2 LED and Larue LT-707 that I got a smoking deal on here EE from jasonhgross

usmcvet

11-13-10, 16:39

Thanks. It is a great looking set up. I like the Mack of a VFG I keep leaning that way too.

Adam Pini

11-13-10, 20:20

http://i213.photobucket.com/albums/cc69/84ragtop/SBR/IMG_1079.jpg

my 10.5 m6a2

usmcvet

11-14-10, 13:35

Adam

Is this your second SBR or did you just change the furniture up? I thought you had an SBR with an LMT SOPMOD I wanted to ask how you liked the MOE compared to the SOPMOD.

Adam Pini

11-14-10, 16:11

Adam

Is this your second SBR or did you just change the furniture up? I thought you had an SBR with an LMT SOPMOD I wanted to ask how you liked the MOE compared to the SOPMOD.

Nope is my only sbr. I wanted to do a color change to the gun on a whim and the moe is cheap. They both offer gret features. The sopmod is hands down the best stock on the market. But the moe fits better because the back is angled to fit people like me that are "slanted" in the front for men of my size

usmcvet

11-14-10, 17:37

I've had several SOPMOD stock, they're great but all my guns have CTR stocks now. I just liked the size. I would like to try a MOE if I buy another gun.

shadow65

11-14-10, 19:52

I've been real happy with the MOE stocK. Especially for the price.
I have mil spec and they are pretty snug.

shadow65

11-14-10, 19:53

http://i213.photobucket.com/albums/cc69/84ragtop/SBR/IMG_1079.jpg

my 10.5 m6a2

What do you think of the AFG on an SBR?

Adam Pini

11-14-10, 20:02

Other than the eotech. I think its the perfect setup for me. I love the balance and how it shoots is better than a wet dream

Tacteam369

11-14-10, 20:06

Colt 9mm carbine with Gemtech Talon SDhttp://i239.photobucket.com/albums/ff176/cflowner/DSC_0020-1.jpg
LMT 10.5" upperhttp://i239.photobucket.com/albums/ff176/cflowner/DSC_0021-2.jpg
GSG-5P with Gemtech 3 lug barrel attachmenthttp://i239.photobucket.com/albums/ff176/cflowner/DSC_0019.jpg

Sprocketeer

11-14-10, 21:33

This is my first SBR and my frist AR. It took about 19 weeks for the stamp, which was a little painful.

Spikes Lower with "Enhanced LPK"
Spikes ST-2 Buffer
Engraving by Orion Arms
Magpul Furniture
PWS / Specialized Tactical Systems Diablo 5.56 Upper
Primary Arms red dot on an American Defense mount
(the red dot is temporary until I can afford an H-1)

I can't wait to put a few down range this week!

http://i56.tinypic.com/2eqf9xu.jpg

http://i56.tinypic.com/69dp1j.jpg

http://i54.tinypic.com/2q0j6za.jpg

tobasco

11-14-10, 21:49

http://i54.tinypic.com/2cnf3w7.jpg

here is one, but missing my .22lr and colt 635 clones in here.

usmcvet

11-14-10, 22:04

http://i54.tinypic.com/2cnf3w7.jpg

here is one, but missing my .22lr and colt 635 clones in here.

Nice Couch!

JodyH

11-17-10, 13:32

10.5" Mega/LMT, Magpul, Aimpoint M2/LaRue, Redi-Mag
14.5" Mega/BCM, Magpul, Meopta K-dot/LaRue (used to be a 10" Mega/RRA/VM A2 9mm SBR)

http://i126.photobucket.com/albums/p82/JodyHuggins/sbr2-1.jpg

Lucke551

11-17-10, 18:54

I am sooo jealous! I sent off the paper work on a 10.5 AR and a Gemtech suppressor... my NFA guy has a box with my name on it full of stuff to put on it and replace from stock. Has anyone tried the Magpul AFG the angled foregrip? I usually put a vertical foregrip on my AR's but this looks interesting. I see many of the things I'm putting on mine on yours but I haven't seen this...opinions?

I'm new here and look forward to getting to know the regulars
Thanks!!
Evan

SuicideHz

11-17-10, 18:57

Evan- You can't use the AFG to it's full potential on a short carbine length handguard/rail. I wouldn't recommend it. If you have a shaved FSB and a midlength rail or DD RISII then go for it. They work well but I ditched mine long ago. TD stubby works for me.

Lucke551

11-17-10, 19:09

The TD stubby was really my first choice but the grip looked interesting...maybe I'll try it on my 16 inch Carbine. I feel like a kid waiting for Christmas with this SBR and suppressor but it's not like I don't have any other toys to play with...oh well just a big kid at heart.

usmcvet

11-17-10, 19:17

I agree skip the AFG on an SBR. I tried it when it came out on my SBR and I hated it. Unless your 16" carbine has a long rail you may feel the same way. I could see it working on a rifle length or mid length rail but 7" is awful tight in my opinion. I think your TD stubby w/o quick detach is an excellent choice. It is also affordable. I've tried half a dozen fore grips and really like the stubby TD and MOE the best.

TRUST8383

11-18-10, 02:07

Speaking of an AFG on a 16" carbine versus a TD stubby on a SBR? ;)

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/DDM4/MK18/dd9c28cb.jpg

Lucke551

11-18-10, 05:25

Thanks for the input...I'm going to stay with the TD shorty for the SBR and I like the foregrip I have on my carbine that has a bipod inside. It came in real handy at USSA Carbine class.
DVC

Evan

Lucke551

11-18-10, 18:20

The AFG looks good...comfortable? Improve follow up shots?:rolleyes:

zombie killer

11-18-10, 21:36

I'm finally in the cool kids club.

http://i299.photobucket.com/albums/mm317/Phillip_Musick/sbr1.jpg

TRUST8383

11-18-10, 23:23

The AFG looks good...comfortable? Improve follow up shots?:rolleyes:

Comfortable on a 16" rifle as stated earlier. Improving follow up shots are due to the BC1.0. ;)

Don't want to go off topic but here's that particular rifle at the range.

http://www.youtube.com/watch?v=XZVPt0VB-AM

Picture thread ------->

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%2011-07-09/83dfc8cb-1.jpg

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%2011-07-09/af32a9d7-1.jpg

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%2011-07-09/b253bd87.jpg

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%2011-07-09/80152269.jpg

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/be104780.jpg

Scotter260

11-19-10, 11:20

Updated my SBR a bit after shedding some weight. Minor things but it definitely feels more like its barrel profile would indicate.

http://img.villagephotos.com/p/2005-10/1100114/AnSBRupdate.JPG

Lucke551

11-19-10, 16:28

I know you're gonna get tired of the questions but amazingly I get replies and they are appreciated. Still trying to trick out my soon to be SBR...waiting on the paper work to get back. I am going to put large mag release and I thought bolt release too but I saw a Magpul BAD today and I liked it. I hate having to do weird manipulations to run the gun but this seemed even easier then an extended button. Please give me input...thanks

Evan

tobasco

11-19-10, 16:34

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%2011-07-09/83dfc8cb-1.jpg

what kind of lower is that on the top sbr?

CCK

11-19-10, 16:48

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%2011-07-09/83dfc8cb-1.jpg

what kind of lower is that on the top sbr?

Thats a factory LWRC

usmcvet

11-19-10, 18:17

TRUST8383

11-19-10, 20:04

Thats a factory LWRC

Correct sir.

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/RANGE%20PICS/FOP%2011-07-09/63981891.jpg

surgecj7

11-20-10, 16:16

https://www.m4carbine.net/attachment.php?attachmentid=6607&stc=1&d=1290291041
https://www.m4carbine.net/attachment.php?attachmentid=6608&stc=1&d=1290291056
Been working on my SBR platform for awhile now. ATF has recieved my paperwork and the ball is rolling. Here is what I have so far.

Spike's Upper and Lower
Spike's Quad rail
Redi-Mag
Magpul everything else.

Drank copius amounts of Kool-Aid an yes it is good. Threw in some shine for good measure.:cool:

ROGOPGEAR

11-20-10, 16:32

usmcvet

11-20-10, 17:03

Surge,

Is that two guns or the same with different stock, sights and rail covers? What length bbl will you be using when your stamp comes back?

surgecj7

11-20-10, 17:45

dude, your quadrail is all screwed up. need to bolt those screws flush and align the top rail with the upper receiver.
Ye I know. No sense in tightening everything down till I get my stamp back and can buy the barrel for it. Then I can get everything dialed in.

surgecj7

11-20-10, 17:50

Surge,

Is that two guns or the same with different stock, sights and rail covers? What length bbl will you be using when your stamp comes back?

Same gun just drivers and passenger side views. Must be the lighting when I took the pics. Want it short in the extreme and am goin with a 7.5 barrel. Next build that I have already started is going to be a 10.5.

Rider79

11-25-10, 09:05

http://i871.photobucket.com/albums/ab278/Rider79/0052.jpg
http://i871.photobucket.com/albums/ab278/Rider79/007.jpg

Daniel Defense 11.5" barrel with 10" DD Lite rail, X300 at 12:00, AFG, T1 in a LaRue mount, BCM BCG, Mod 4 CH, on one of the shop's full auto lowers.

SouthNarc

11-27-10, 10:43

Work gun:

Colt DRMO M16A1 lower w/ Magpul furniture
Upper BCM 11.5" Lightweight barrel w/shaved FSB and VTAC/TROY Extreme 9" tube. Battlecomp and IWC mounts for sling and Scoutlight.

Lucke551

11-28-10, 07:13

Thanks Southnarc...really nice weapon! I've been wanting to take a class with you for a while...anything coming up in Texas? Tom Givens is coming for a seminar in April and I'm signed up for that but would like to take a class of yours sometime.

Evan

SouthNarc

11-28-10, 07:48

Thanks Evan! I actually have a class in College Station, TX. May 20-22. GreyGroupTraining is the host.

rob_s

11-28-10, 10:30

http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/f421c437.jpg

Lucke551

11-28-10, 14:39

Nice weapon!!! I like the accesories and the rifle. Can't wait till I can post pics of mine!

Evan

usmcvet

11-28-10, 15:18

http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/f421c437.jpg

Nice set up. Do you have the rear QD point on the opposite side to keep the rifle from flopping around on you?

rob_s

11-28-10, 15:24

Yes kind of. I also sling the rifle ejection port in when transitioning to handgun.
The originals quick-adjust two-point sling maker, Boonie Packer, also suggests this connection method. Having the connection on the outside also keeps it out of your face when shooting.

TRUST8383

11-28-10, 22:40

http://images50.fotki.com/v1572/photos/0/66370/9283981/Picture448-vi.jpg

Cameron

11-29-10, 23:18

Cool pic TRUST8383!!

My LMT 10.5"

http://farm6.static.flickr.com/5247/5213533152_a8139f8ddd_b.jpg

http://farm6.static.flickr.com/5007/5213533260_e060114d91_b.jpg

bsmith_shoot

12-01-10, 16:16

I just added the Vltor IMOD to my Noveske SBR and I am impressed with the new design....they really nailed it.

http://i5.photobucket.com/albums/y198/buddyhoohaw/Noveske/N4-01.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/Noveske/N4-02.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/Noveske/N4-03.jpg

I have an M300a on order to replace my old G2 in Vltor mount.

Cheers

Nice, I run an E-Mod on my 11.5 BCM, and its sweet.

superchi

12-04-10, 07:20

Pictures didn't come out too good so decided to play around with them in PS:

http://lh6.ggpht.com/_ik1anMMYkmI/TPo_bIxji0I/AAAAAAAAAYw/DMP23r13l6U/IMG_0041.JPG

buddyhoohaw

12-04-10, 13:01

ALCOAR

12-04-10, 13:48

LMT 12.5" piston MRP

http://i5.photobucket.com/albums/y198/buddyhoohaw/LMT/MRPT-01.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/LMT/MRPT-02.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/LMT/MRPT-03.jpg

Cheers

Truly Outstanding Sir:p

What else can I use to describe that build of your besides the infamous "Pure":D

"Purity — its what we all desire, and it is what I’ve come here to share with you. Hence the all whites." - Kenny

buddyhoohaw

12-04-10, 14:42

"La Flama Blanca"

miamitj

12-04-10, 17:40

Magsz

12-04-10, 19:02

Reserecting this post to see how the rail has held up. I have the same rifle, ironically built by overland as well I was thinking about adding the rail too.

It just hurts me to drill my top cover on such a beautiful rifle...

Ultimak man, seriously, dont drill your top cover. That krink is way too nice to screw with like that. :)

miamitj

12-04-10, 19:54

Ultimak man, seriously, dont drill your top cover. That krink is way too nice to screw with like that. :)

They don't have one for the bulgy ...

JustinT

12-04-10, 21:48

http://farm6.static.flickr.com/5044/5232854453_552f2c919d.jpg (http://www.flickr.com/photos/46704041@N02/5232854453/) http://farm6.static.flickr.com/5125/5233948516_0fc103b7c2.jpg (http://www.flickr.com/photos/46704041@N02/5233948516/)

Cincinnatus

12-06-10, 08:51

jwfuhrman

12-07-10, 21:36

http://i6.photobucket.com/albums/y201/paintballaddict/100_1211-1.jpg

BCM 12.5in KINO Upper
BCM BCG
EOTech 511.A1 (looking for a H1/T1 to trade towards)
MagPul Midlength MOE
MOE Grip
MOE trigger guard
MOE stock
MagPul Rear MBUS
MagPul ASAP
Battle Comp 1.0

Glock 35
LWD G35 barrel
Vanek Super Custom Deluxe trigger(2lb, short reset, short pre-travel) - more like a 1911 trigger
Arredondo +5
TLR-1

Rider79

12-07-10, 22:33

I'd like to see more pics of this, this is how I want to do my next SBR.

http://i6.photobucket.com/albums/y201/paintballaddict/100_1211-1.jpg

BCM 12.5in KINO Upper
BCM BCG
EOTech 511.A1 (looking for a H1/T1 to trade towards)
MagPul Midlength MOE
MOE Grip
MOE trigger guard
MOE stock
MagPul Rear MBUS
MagPul ASAP
Battle Comp 1.0

Glock 35
LWD G35 barrel
Vanek Super Custom Deluxe trigger(2lb, short reset, short pre-travel) - more like a 1911 trigger
Arredondo +5
TLR-1

usmcvet

12-08-10, 05:57

How do you like the balance of the Kino?

bwhited

12-08-10, 17:47

Just got my newest SBR complete...

http://img5.imageshack.us/img5/8804/p90002.jpg

Target07

12-08-10, 18:02

One configuration...
http://i235.photobucket.com/albums/ee273/ahhumphries/Noveske001.jpg
http://i235.photobucket.com/albums/ee273/ahhumphries/Noveske003.jpg

And another configuration...
http://i235.photobucket.com/albums/ee273/ahhumphries/1911andSBR001.jpg
http://i235.photobucket.com/albums/ee273/ahhumphries/1911andSBR002.jpg

jwfuhrman

12-08-10, 22:39

Ive messed around with 3 different barrel lengths and rail configurations and the KINO with the MOE hand guard and a MOE stock is balanced perfectly for me. Im finally set on my SBR build, and I couldnt be happier. I had been running my front Troy flip up sight flipped up all the time anyways on a 10in rail. I want the 12.5in for the extra velocity, while still keeping the gun short, so I went with the KINO and love it.

http://i6.photobucket.com/albums/y201/paintballaddict/100_1212.jpg

usmcvet

12-09-10, 01:05

It looks awesome John. I'd like one eventually. I have a 10.5, 11.5 and I am working on a 10.3. Your gun just has a real balanced look to it.

Fireman1291

12-09-10, 20:44

Anyone know where/who to send your title2 SBR to to get the crane MK18 MOD0 laser markings on the right side magwell?

Velcro

12-09-10, 20:54

Contact Ross @ Spikes Tactical in Apopka, they should be able to do it

Velcro

usmcvet

12-09-10, 20:56

Anyone know where/who to send your title2 SBR to to get the crane MK18 MOD0 laser markings on the right side magwell?

Orion has an example on their website.

http://www.orion-arms.com/ar15-engraving.html

usmcvet

12-09-10, 21:21

http://www.orion-arms.com/images/stories/M16/M16-MK18-MOD0.jpg

Here is a photo.

Fireman1291

12-10-10, 17:11

Thanks all, I wonder if spikes can do it while I wait. I dont feel like shipping a SBR lower.....

dudshep31

12-10-10, 17:39

http://i41.photobucket.com/albums/e251/the_accuser/mrp1052.jpg

What kind of can is this? I've got this same setup-minus the can-and love it.

dudshep31

12-10-10, 17:58

Also wondering if anyone has any pics of a 10.5 MRP with an AAC M4-2000 can?

Luke_Y

12-10-10, 19:54

What kind of can is this? I've got this same setup-minus the can-and love it.

Ops Inc M4-S

the_accuser

12-11-10, 06:50

What kind of can is this? I've got this same setup-minus the can-and love it.

The can is an Ops M4-S. Really only designed to take off the harsh bark from the muzzle break yet still keep the OAL of the firearm short. Works really nice.

Jason

dudshep31

12-11-10, 12:13

The can is an Ops M4-S. Really only designed to take off the harsh bark from the muzzle break yet still keep the OAL of the firearm short. Works really nice.

Jason

Thanks for the replies. I like the look with the shorter can. I've got the M4-2000 coming-waiting for paperwork-but I believe the OAL is a little longer and I was kinda worried about it having enough clearance to fit.

Mega

12-14-10, 11:36

Bushmaster SBR
The only thing left of the original Bushmaster are the roll marks. :)

12.5" barrel
11" LaRue quad rail
Aimpoint Comp M4s optic
Timney 3# trigger
KNS anti-roll pins
Noveske KX3 'flaming pig' flash suppressor
BCM FA Bolt Carrier Group
BCM Gunfighter CH
Magpul BUS
Magpul CTR stock
Magpul MIAD battle grip
Magpul AFG
Magpul BAD lever
Magpul ladder rail covers
Magpul 20 round magazines with ranger plates
Viking Tactical padded sling

http://gallery.me.com/kevinfarrell/100158/DSCN0002_4/web.jpg

http://gallery.me.com/kevinfarrell/100158/DSCN0005_4/web.jpg

http://gallery.me.com/kevinfarrell/100158/DSCN0006_3/web.jpg

OUTLAW-ONE

12-15-10, 23:06

I'll play

http://media10.dropshots.com/photos/254538/20101209/b_092641.jpg

http://media9.dropshots.com/photos/254538/20101209/b_092655.jpg

Rider79

12-15-10, 23:24

So what's up with the AFG and MOE RFG?

OUTLAW-ONE

12-15-10, 23:33

So what's up with the AFG and MOE RFG?

Don't knock it till you've tried it. It gives my the best of both worlds. I like to change my grip up depending on my stance, shooting around, under or above objects.

usmcvet

12-16-10, 00:08

Can you run the light from the AFG?

Rider79

12-16-10, 00:33

Don't knock it till you've tried it. It gives my the best of both worlds. I like to change my grip up depending on my stance, shooting around, under or above objects.

I'll take your word for it.

outrider627

12-16-10, 01:05

Lucke551

12-16-10, 05:49

I am so jealous! ATF still has my paperwork so my SBR and suppressor sit lonely at the gun shop...they keep calling me!

Merry Christmas to all and nice rifles!!

Lucke:D

ICANHITHIMMAN

12-16-10, 07:48

Your Jealous I live in a COMMIE state your lucky but i get it.

I am so jealous! ATF still has my paperwork so my SBR and suppressor sit lonely at the gun shop...they keep calling me!

Merry Christmas to all and nice rifles!!

Lucke:D

OUTLAW-ONE

12-16-10, 08:34

Can you run the light from the AFG?

No not from the AFG, only from the RVG.

SERVED_USMC

12-17-10, 08:18

Heres mine

11.5" w/ 11'' rail. Ill be swapping the Larue 11'' for a DD 10'' so I can put a can on it. All I need is a set of irons and to wait for GearSectors VFG to come out and I will leave it as is. Can gets ordered after the holidays.

LAR MFG lower
CMMG upper
ML3
GearSector hand stops and single point.

http://i89.photobucket.com/albums/k215/THROTTLEJUNKIES/DSC00500.jpg

http://i89.photobucket.com/albums/k215/THROTTLEJUNKIES/DSC00499.jpg