The Official SBR Picture Thread [Archive] - Page 9

Aggunner

12-22-10, 07:18

I kinda like it, what's the barrel/rail length? Other details?

the rail ended up being longer than I thought because I'm a dumb ass and didn't really think about it when I ordered it lol

It's a DD 12.5 bbl with a 12.0 lite rail which actually measures ~12.6 with a fixed DD front sight, gear sector scout mount, mini scout, AFG2, and a peq2A on an ADM mount.

Mega

12-22-10, 07:28

http://gallery.me.com/kevinfarrell/100158/DSCN0010_5/web.jpg

http://gallery.me.com/kevinfarrell/100158/DSCN0014_2/web.jpg

jdub75

12-22-10, 13:47

DD Lower/LWRC 10.5" upper:
Battlecomp
UBR
H1 on GG&G mount
Streamlight
I know....the whole 'AFG doesn't belong on SBR's', but I tried VFG's, XTM panels, rail covers only, and this feels the best as far as the angle of my wrist holding the weapon, so piss off if it bothers you!:sarcastic:
I've been happy w/ the LWRC...shoots any ammo I put thru, although milsurp 5.56 is a goddam fireball!
It is one loud little ****er, but its fun to shoot & accurate enuf for me. It weighs more than a DI gun, but it is perfectly balanced IMO & carries nicely on hikes.
Since the pic I received my Jager strike plate, as I got the UBR used & it was missing the sling loop. I've also added a Gear Sector sling rail adapter for a 2-point in patriot brown---a near perfect match to LWRC's MRE.
http://i886.photobucket.com/albums/ac66/jdub75/SBR/107.jpg
http://i886.photobucket.com/albums/ac66/jdub75/SBR/106.jpg

TRUST8383

12-23-10, 02:17

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/DDM4/MK18/87f15c40.jpg

Rider79

12-23-10, 02:34

What kind of case is that?

Fireman1291

12-23-10, 05:52

Looks like the larue stealth bag.....

Brahmzy

12-23-10, 08:40

Still trying to get this one to the range. Just finished it a few days ago. Been foggy, snowing and 20 degrees out! Argh.

http://img690.imageshack.us/img690/512/sbr01s.jpg (http://img690.imageshack.us/i/sbr01s.jpg/)
http://img10.imageshack.us/img10/5454/sbr02s.jpg (http://img10.imageshack.us/i/sbr02s.jpg/)
http://img155.imageshack.us/img155/2798/sbr03s.jpg (http://img155.imageshack.us/i/sbr03s.jpg/)
http://img26.imageshack.us/img26/4346/sbr04s.jpg (http://img26.imageshack.us/i/sbr04s.jpg/)
http://img191.imageshack.us/img191/1175/sbr05s.jpg (http://img191.imageshack.us/i/sbr05s.jpg/)
http://img707.imageshack.us/img707/3637/sbr06s.jpg (http://img707.imageshack.us/i/sbr06s.jpg/)
http://img151.imageshack.us/img151/4093/sbr07s.jpg (http://img151.imageshack.us/i/sbr07s.jpg/)
http://img441.imageshack.us/img441/7453/sbr08s.jpg (http://img441.imageshack.us/i/sbr08s.jpg/)

bradb55

12-23-10, 08:54

Brahmzy,

That is beautiful! I love the dimpled barrel. Who did the work dimpling for you?

TRUST8383

12-23-10, 13:00

Brahmzy! awesome build man...Looks fantastic!

The mega upper/lower is sweet! NiB BCG and BAD ASS safety are on my wishlist as well. :D

Rider- My sbr case is the Tactical Tailor covert bag from Larue.

Ironman8

12-23-10, 15:57

GREAT thread here...really the reason I just joined ;)

Everyone here has some nice rigs! Hopefully I'll be adding one pretty soon...plan on getting Noveske's MK18 10.5" upper sometime soon!

Just one question...I see alot of guys using suppressors on their DI SBR's...did you guys tune the gas port, or are you using heavier buffers, or what? How is the reliability?

Thanks

Hootiewho

12-26-10, 14:17

My SCAR 16 CQC in a very rare snowfall for my area...
http://i135.photobucket.com/albums/q153/hootiewho6933/DSC05620.jpg
http://i135.photobucket.com/albums/q153/hootiewho6933/DSC05628.jpg
http://i135.photobucket.com/albums/q153/hootiewho6933/DSC05638.jpg
http://i135.photobucket.com/albums/q153/hootiewho6933/DSC05640.jpg
http://i135.photobucket.com/albums/q153/hootiewho6933/DSC05643.jpg
http://i135.photobucket.com/albums/q153/hootiewho6933/DSC05653.jpg

Lawdog-1

12-26-10, 14:43

HootieWho, what lenght is your SCAR barrel? Where in SC are you located?

Hootiewho

12-26-10, 14:52

10", PM inbound

eternal24k

12-26-10, 15:30

Man,
the SBRd SCARs are soo lustworthy, I hate that they are a whole seperate platform to invest in :D
after shooting a 16" a week ago, I can only imagine how smooth the 10 must be

Sprocketeer

12-29-10, 11:28

Brahmzy,

THAT IS NICE!

GTF425

12-31-10, 10:00

My cold hammer forged, polygonal rifled, short barreled freedom.

http://i802.photobucket.com/albums/yy309/GTF425/Freedom/121_0051.jpg
http://i802.photobucket.com/albums/yy309/GTF425/Freedom/121_0053.jpg
http://i802.photobucket.com/albums/yy309/GTF425/Freedom/121_0054.jpg
http://i802.photobucket.com/albums/yy309/GTF425/Freedom/121_0055.jpg
http://i802.photobucket.com/albums/yy309/GTF425/Freedom/121_0058.jpg
http://i802.photobucket.com/albums/yy309/GTF425/Freedom/121_0060.jpg
http://i802.photobucket.com/albums/yy309/GTF425/Freedom/121_0062.jpg

m249saw

01-01-11, 12:22

I want to do a USC/UMP Conversion sooo bad. Finding the parts seem to be an issue.

eagle5

01-01-11, 15:43

http://i134.photobucket.com/albums/q109/eagle5_stl/MK18%20FSP%20RIS%20II/P1030418_2.jpg

http://i134.photobucket.com/albums/q109/eagle5_stl/MK18%20FSP%20RIS%20II/P1030421_2.jpg

Sprocketeer

01-01-11, 17:41

My cold hammer forged, polygonal rifled, short barreled freedom.
:(
http://i802.photobucket.com/albums/yy309/GTF425/Freedom/121_0062.jpg

GTF425,

Details please on both of your SBR's!
Beautiful camo job too!

Lawdog-1

01-01-11, 20:39

GTF425, What brand rail is that on your Tan M4?

adh

01-01-11, 21:35

GTF425, What brand rail is that on your Tan M4?

Looks to me to be an HK416 upper (I think GTF425 may like HKs)
http://media.defenseindustrydaily.com/images/ORD_HK416_Labeled_lg.jpg

GTF425

01-02-11, 10:33

I want to do a USC/UMP Conversion sooo bad. Finding the parts seem to be an issue.

I was fortunate enough to pick this one up already converted by HDPS. Hopefully you get what you need for your own UMP. I love mine.

GTF425,

Details please on both of your SBR's!
Beautiful camo job too!

Thank you. Two cans of Krylon and some mesh goes a long way! Haha.

HK416 10.4" upper
TA-01 ACOG
MOE stock
Geissele trigger (custom SSA to trip firing pin safety. Bill is one hell of a guy!)

HK USC converted to UMP by HDPS
EOTech XPS3-1

GTF425, What brand rail is that on your Tan M4?

Factory HK rail

Looks to me to be an HK416 upper (I think GTF425 may like HKs)
http://media.defenseindustrydaily.com/images/ORD_HK416_Labeled_lg.jpg

I love my HKs but really like my Rugers for daily use. I like the engineering that goes into HK weapons but definitely don't like the price that comes with it!

Polymerhead

01-02-11, 11:05

http://i6.photobucket.com/albums/y218/Polymerhead/2011SBR.jpg

Rebuilt w/:

Geissele SSA trigger
DD lightweight barrel
DD pinned gas block
MI SS-series rail
Vltor Imod
Tang Down pistol grip

I aslo went back to the MI flipups for now.

Here's the before, rugged but way too heavy with the bull barrel, YHM rail and ACE stock.
http://i6.photobucket.com/albums/y218/Polymerhead/SBSEOTech.jpg

jwfuhrman

01-05-11, 16:44

Family Photo

Foliage Green Furniture -
12.5in BCM Kino Upper
Delaware Machinery Lower
MagPul Furniture
American Defense Recon-X mount
Burris 4x Timberline

Black "KISS" SBR
Bushmaster M4A3
1/9 16in Bushy barrel cut down to 10.5in
BCM BCG

http://i6.photobucket.com/albums/y201/paintballaddict/100_1234.jpg

Aggunner

01-09-11, 19:37

One of my new DD uppers

http://aggunner.com/pictures/ar/sbrs/ddsbr.jpg

MegaHurts

01-09-11, 20:14

Wow, nice. Hard to top that;).

Thanks to the members here I finally got this thing finished and my papers back.
http://i372.photobucket.com/albums/oo162/megahurts777/2011-01-09_19-06-20_896.jpg

Older pics before I changed some stuff up.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1368.snc4/164013_1542551168995_1391437171_31273355_7993985_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1368.snc4/164013_1542551208996_1391437171_31273356_796769_n.jpg

Noveske N4 Light upper with a Sun Devil lower. Eventually I will be getting a T1 for it but until then this thing works like a charm.

variablebinary

01-11-11, 14:24

Got my MRP 10" DI barrel today. Sadly, I wont be able to shoot it for awhile.

http://i1098.photobucket.com/albums/g377/VariableB/mrp1.jpg

Sprocketeer

01-11-11, 14:34

Got my MRP 10" DI barrel today. Sadly, I wont be able to shoot it for awhile.

http://i1098.photobucket.com/albums/g377/VariableB/mrp1.jpg

I like that alot!
I would like to know how to do that camo paint. Is there a thread that talks how to accomplish that pattern.

Awesome!

GTF425

01-11-11, 14:45

I like that alot!
I would like to know how to do that camo paint. Is there a thread that talks how to accomplish that pattern.

Awesome!

Krylon
Mesh

Vary distance between spraycan/weapon to lighten/darken the color.

*EDIT: You have a PM.

ALCOAR

01-11-11, 14:48

Awesome job Variable....as good as it gets in my book:)

25Chuck

01-11-11, 18:56

Got my first SBR put together recently.

Between starting this rifle and getting my stamp back I decided to go back to college. So due to lack of funds I had to combine a few projects and basically ended up assembling the upper from spare parts. This was most definitely not how I envisioned the rifle coming together but in the end I really like the way it turned out.

http://i82.photobucket.com/albums/j252/25chuck/Weapons/IMG_1634.jpg

SPECS:
Sully Stock
SLR-15 Lower
Geissele SSA Trigger
MIAD Grip
Brownells A2 Single Point Sling Adapter
BCM Bolt Group, NP3'd by Robar
A1 Upper
Cut Down A1 Handguards
Sabre 10.5 Barrel
Phoenix Flash Hider

usmcvet

01-11-11, 19:46

Whootsinator

01-11-11, 20:44

I like that alot!
I would like to know how to do that camo paint. Is there a thread that talks how to accomplish that pattern.

Awesome!

That paint is actually very easy. You can use a laundry bag, fishnet stocking (probably easiest method - just put the entire rifle into one stocking and paint), or anything with that pattern. Spray your lightest coat of paint, as always, and then when you want to get the mesh pattern in you just paint with your darkest color over the mesh.

variablebinary

01-12-11, 01:55

I like that alot!
I would like to know how to do that camo paint. Is there a thread that talks how to accomplish that pattern.

Awesome!

I used mesh of different sizes and two colors of krylon camo paint.

Wrap the gun parts in the mesh, spray from different distances and angles with the light color first, then again with the darker color, and let dry.

The best thing about krylon is it naturally chips and wears, and gets even more camo looking as a result.

That was my first attempt at a snake-skin pattern. Worked well enough considering I had no experience.

25Chuck

01-14-11, 16:14

Looks awesome to them. Did you do the handguards yourself or buy them. I have an 11.5" A1 in the works.

Thanks, I bought the handguards a few years ago from a guy who modified them himself. FYI I believe PK firearms is selling some pretty good copies of the carbine length triangle handguards now too.

Bootleggn

01-17-11, 17:05

LAR OPS-4 Billet Upper
Black Rain Billet Lower
Yankee Hill 10.5" Barrel
Yankee Hill BUIS
Yankee Hill KX3
Yankee Hill Free Float Rail
Magpul UBR
Magpul MIAD
Magpul AFG

http://i127.photobucket.com/albums/p130/2ThouZ28/coolgun2.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/coolgun3.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/_MG_0261.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/_MG_0268.jpg

Sprocketeer

01-18-11, 11:26

[QUOTE=Bootleggn;880100]LAR OPS-4 Billet Upper

http://i127.photobucket.com/albums/p130/2ThouZ28/_MG_0261.jpg

Nice Rig!
I really like the LAR OPS-4 uppers with the left side charge. I wanted to build an upper like yours but I like the Magpul BAD lever and it doesn't work with those uppers. I know a couple of the guys at LAR and talked to them about making a larger cutout to accomadate the BAD lever. We'll see...

stifled

01-18-11, 12:01

I debated a bit whether or not to share this. I started the process before I knew about M4Carbine and as far as I was concerned at the time, RRA was as good as any other AR manufacturer. At any rate, I picked this stuff up finally after a long drawn out process that ended up taking almost 9 months. Hopefully my next one doesn't get delayed at every turn! I think my next step is going to be having Noveske convert my Light Recce into a factory SBR and plopping a Mk18 upper on it. I've already decided on a Surefire Mini suppressor for 5.56.

At any rate, here it is:
http://i536.photobucket.com/albums/ff328/stifled_bucket/T2i/IMG_1964.jpg

RRA LAR-9
SWR Trident 9
Once SWR is in the office I am going to order a 3 lug mount for the AR as well as a Nielsen device for use with my G17.

I'm extremely happy with the suppressor. Subsonic ammo is surprisingly quiet--the action is by far the loudest thing going on.

The SBR, not so much... Feeding has been a problem, more so from the factory mag, which is a bit depressing. I'm going to have to do some research on the 9mm platform and hopefully come up with a solution, but as it stands this is a range toy until I get it figured out.

Fireman1291

01-18-11, 17:49

My SBR Form1 stamp came in and I just assembled my 10.5" SBR. LOVE IT!

Specs for build- MK18 MOD0 clone

Lower:
Noveske N4 lower
DD parts kit
LMT receiver extention
LMT SOPMOD gen2
Bad-Ass ambi selector
KAC trigger guard
Magpul MOE grip
"LIVE FREE OR DIE" dust cover
KNS anti rotation pins(gen2)
HK 30rd magazine

Upper:
Noveske 10.5 light shorty upper
Noveske Full auto bolt/carrier
KAC M4 RAS rail
KAC vert grip
Gear sector QD sling mount
Gear sector offset light mount
Surefire 6PX pro
AAC 51T QD brake
AAC M4-2000 MOD08
Eotech 511 A65
Vickers Tactical 2-pt padded sling QD(multicam, not shown)

It cost a small fortune but man its a fast sweet package.

http://i114.photobucket.com/albums/n273/fireman1291/DSC03760copy.jpg

http://i114.photobucket.com/albums/n273/fireman1291/DSC03759.jpg

http://i114.photobucket.com/albums/n273/fireman1291/DSC03755-1.jpg

http://i114.photobucket.com/albums/n273/fireman1291/DSC03758.jpg

m249saw

01-18-11, 18:15

Welcome to the world of SBRs brother.

buddyhoohaw

01-19-11, 10:56

Congrats and great choice!! My first SBR was also a Noveske.

Cheers

6933

01-19-11, 11:24

Nice SBR. You'll get hooked. Now lose the HK mag and get some PMags or good GI mags. Ounces=pounds, ya' know.;)

Luke_Y

01-19-11, 15:56

Nice SBR. You'll get hooked. Now lose the HK mag and get some PMags or good GI mags. Ounces=pounds, ya' know.;)

Word. That's a nice stick.

It has been my experience that with HK mags you do not necessarily get what you pay for. I would rather run a Pmag or quality GI mag.

Just a heads though. Take it in the spirit given, as that is a sweet SBR.

Bourneshooter

01-19-11, 18:47

Here is my 9.7 pound SBR.

It has a VLTOR VIS with 9" handguard.
Noveske 10.5 Stainless barrel
Surefire M600 C Scout Light in Danger Close Mount.

28 rounds of Hornady TAP 5.56 with T-2 bullet.

Also 6 surefire batteries in the magpul stock.

I'm thinking of selling this upper and buying a 10.5 N4 barrel and one of the Troy TRX rails as it should shave some weight off.

Accuracy wise its a better gun than I am shooter. I have no problems hitting torso sized steel out to 300 yards (farthest my range has steel at) with iron sights. Only complaint is the weight.

http://i52.photobucket.com/albums/g33/Mattlevi/pirates/DSCN1246.jpg

Fireman1291

01-20-11, 16:35

Nice SBR. You'll get hooked. Now lose the HK mag and get some PMags or good GI mags. Ounces=pounds, ya' know.;)

Yeah, I only own one. Just to try it out....it's in the pics cause it looks pretty. Lol

And I really prefer the GI mags to the Pmags. :cool:

Bootleggn

01-20-11, 19:35

http://i127.photobucket.com/albums/p130/2ThouZ28/DSCN2794.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/DSCN2796.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/DSCN2798.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/DSCN2799.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/DSCN2800.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/DSCN2804.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/DSCN2806.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/DSCN2808.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/DSCN2809.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/DSCN2812.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/DSCN2813.jpg
http://i127.photobucket.com/albums/p130/2ThouZ28/DSCN2814.jpg

m249saw

01-20-11, 19:59

Im really liking that sidecharger.

I feel a new build in the works... Crap

m249saw

01-20-11, 20:04

Guess I show update mine since I switched the rear sight to try to be a little closer to Mk18Mod0 status.

http://i5.photobucket.com/albums/y158/m249saw/carbine.jpg

jwfuhrman

01-20-11, 20:47

Updated:

MK18 style build

Bushmaster 10.5in Barrel
BCM BCG
Midwest Industries 10in Rail
Battle Comp 1.0
MOE Stock
MOE Grip
Burris 4x
ADM Recon mount

Bipod was for sighting in.

http://i6.photobucket.com/albums/y201/paintballaddict/100_1263.jpg
http://i6.photobucket.com/albums/y201/paintballaddict/100_1261.jpg

Pk14

01-22-11, 14:03

Noveske N4 Shorty Switchblock - great handling package with the NovaTac 120T flashlight in the GS mount (a lot lighter than the VLTOR / G2 combo on the 14.5" gun). Still sorting out the handstop / VFG, but need to run through a Carbine class before settling on final configuration.

http://i133.photobucket.com/albums/q43/Pk14_photos/IMG_1014.jpg

http://i133.photobucket.com/albums/q43/Pk14_photos/IMG_1013.jpg

http://i133.photobucket.com/albums/q43/Pk14_photos/IMG_1012.jpg

http://i133.photobucket.com/albums/q43/Pk14_photos/IMG_1019.jpg

Good stuff!

Family Pic:
http://i133.photobucket.com/albums/q43/Pk14_photos/IMG_1011.jpg

Damn BRD!

Cheers!
Pk

MegaHurts

01-22-11, 14:34

m249saw

01-22-11, 14:39

GTF425

01-22-11, 15:42

Love that Noveske.

Impact

01-22-11, 18:20

care to elaborate on the NovaTac 120T flashlight ? looks good.

Pk14

01-23-11, 06:11

care to elaborate on the NovaTac 120T flashlight ? looks good.

Impact, I have a Malkoff M60 in the G2 /VLTOR mount on the 14.5" GP gun and it works fine, however, when I tried it on the Shorty, I could feel the difference in how agile the front of the gun was transitioning between targets (not as noticeable when sticking that suppressor on the front, to be sure). For the Shorty, its primary purpose was an Indoor / HD weapon (mostly suppressed). I was looking for light weight and ~110-120 lumens. The NovaTac fits the bill very well in the GS mount. Plus, with the Breakout, I didn't want a weaponlight front end exposed to all the blast / debris when I ran it unsuppressed. The GS mount is not quick-detach, so, I wanted a shorter overall light length to leave it as a permanent solution. The U/I is pretty straight forward, although a light AD is a lot easier on the NovaTac without a lockout for the switch. On the G2, I rotate the switch until a bump on the switch won't trigger the light - when I am ready to start low-light shooting, a quick roll with the side of the forefinger on the G2 switch's side returns the switch to being hot on depress.

Hope that helps - Pk

chadwick76

01-24-11, 23:09

Noveske 10.5 in FA

http://i558.photobucket.com/albums/ss28/chadwick76/DSC_0063.jpg

http://i558.photobucket.com/albums/ss28/chadwick76/DSC_0463-1.jpg
Blasting tannerite with the shorty video:D

VA_Dinger

01-29-11, 17:00

My new 10.5" HK416.

This one has the newer lighter profile barrel so it's noticeably lighter than my old 416.

S&S Precision Surefire Scout light mount
Surefire Scout light
EoTech XPS
KAC Micro iron sights
Blue Force Gear/Vickers Tactical sling
Tango Down Battlegrip

http://img.photobucket.com/albums/v74/va_dinger/HK416001-1.jpg

http://img.photobucket.com/albums/v74/va_dinger/HK416006.jpg

Tango2249

01-30-11, 00:30

The latest setup...
http://img.photobucket.com/albums/v477/kazuyajin69/100_9304.jpg

What stock are you running on your rifle?

variablebinary

01-30-11, 07:28

My new 10.5" HK416.

This one has the newer lighter profile barrel so it's noticeably lighter than my old 416.

S&S Precision Surefire Scout light mount
Surefire Scout light
EoTech XPS
KAC Micro iron sights
Blue Force Gear/Vickers Tactical sling
Tango Down Battlegrip

When did HK start doing a lighter profile barrel on the 10.5" HK416's?

VA_Dinger

01-30-11, 10:42

When did HK start doing a lighter profile barrel on the 10.5" HK416's?

I'm not sure exactly when they switched but the lighter profile barrels are now standard on both 10.5" & 14.5" 416's.

To get the original heavy barrel you have to special order them.

Obviously I think this is a smart move.

connorh

01-30-11, 10:56

What stock are you running on your rifle?

magpul acs stock. sorry I have no sbr pics :(

Cameron

01-30-11, 14:18

http://farm6.static.flickr.com/5059/5401495883_3ce2393551_b.jpg

http://farm6.static.flickr.com/5060/5402437512_4cf25813c3_b.jpg

Tactical_Machete

01-30-11, 20:09

http://i812.photobucket.com/albums/zz47/murder8ion/DSC_0064.jpg

santi210

01-31-11, 18:00

Noveske N4 Shorty Switchblock - great handling package with the NovaTac 120T flashlight in the GS mount (a lot lighter than the VLTOR / G2 combo on the 14.5" gun). Still sorting out the handstop / VFG, but need to run through a Carbine class before settling on final configuration.

http://i133.photobucket.com/albums/q43/Pk14_photos/IMG_1014.jpg

http://i133.photobucket.com/albums/q43/Pk14_photos/IMG_1013.jpg

http://i133.photobucket.com/albums/q43/Pk14_photos/IMG_1012.jpg

http://i133.photobucket.com/albums/q43/Pk14_photos/IMG_1019.jpg

Good stuff!

Damn BRD!

Cheers!
Pk

Exact one i'm trying to get soon. I just looked on Noveske's website and saw there temporary out.

Bootleggn

02-02-11, 21:01

Noveske 10.5 in FA

http://i558.photobucket.com/albums/ss28/chadwick76/DSC_0063.jpg

http://i558.photobucket.com/albums/ss28/chadwick76/DSC_0463-1.jpg
Blasting tannerite with the shorty video:D

Looks like you changed the compensator, the vfg, and removed your sling mount? Which pic is most recent?

Gunn-Fighter

02-04-11, 12:52

http://i29.photobucket.com/albums/c275/lucksthename/DSC_0011-5.jpg

Seaslug

02-04-11, 13:05

Noveske Diplomat :)

http://i101.photobucket.com/albums/m49/bsimpson23/DSCN2577.jpg

http://i101.photobucket.com/albums/m49/bsimpson23/DSCN2580.jpg

msr

02-04-11, 13:10

Nice first post!

Zeus

02-04-11, 17:11

VERY nice post indeed!!!

Awesome microblaster!

mttomb

02-06-11, 07:55

First SBR

Brahmzy

02-06-11, 10:18

My first SBR :D
http://i661.photobucket.com/albums/uu339/onlyonemttomb/SBR/SBRleftsidebluespotlight_00000.jpg
http://i661.photobucket.com/albums/uu339/onlyonemttomb/SBR/SBRleftrearsidepointlightyellow_00000.jpg
http://i661.photobucket.com/albums/uu339/onlyonemttomb/SBR/SBRfrontleftyellowpoint_00000_00000.jpg

Good grief man, fix those pictures!

Cameron

02-06-11, 15:34

http://farm6.static.flickr.com/5179/5405301130_70c9e8f530_b.jpg

http://farm6.static.flickr.com/5059/5401495883_3ce2393551_b.jpg

CKettler

02-06-11, 20:22

Nice case set-up. I assume it is a Pelican, but what model? I'm looking for a case for my Diplomat. I'm thinking of a Tac-Force 26" soft case.

Noveske Diplomat :)

http://i101.photobucket.com/albums/m49/bsimpson23/DSCN2577.jpg

http://i101.photobucket.com/albums/m49/bsimpson23/DSCN2580.jpg

mttomb

02-07-11, 19:19

Good grief man, fix those pictures!

I will remove them asap.

GTF425

02-07-11, 19:48

First time posting pics didn't realize there was a certain format to be used my apology
I will remove them asap.

Just brighten them up a little to better show off your toy. :)

Seaslug

02-08-11, 10:58

Nice case set-up. I assume it is a Pelican, but what model? I'm looking for a case for my Diplomat. I'm thinking of a Tac-Force 26" soft case.Pelican 1700 with the Pick 'N Pluck foam. Oh, and thanks! :thank_you2:

zombie killer

02-11-11, 18:53

http://i299.photobucket.com/albums/mm317/Phillip_Musick/Toys/sbr15-1.jpg

Packman73

02-11-11, 19:47

http://i299.photobucket.com/albums/mm317/Phillip_Musick/dipped.jpg

Looks awesome.:cool:

Rosco79

02-12-11, 10:06

Hmac

02-12-11, 10:21

BCM BFH 11.5 barrel
DD Lite 9.0 rail
Noveske matched upper/lower
FFS556 compensator (now has BCE 1.0)
Noveske (Troy) sights
Eotech EXPS2
Noveske Gunfighter charging handle

http://SSEquine.net/sbr6s.jpg

AggiePhil

02-12-11, 10:41

LWRC PSD 5.56 I swapped out the carbine length rail for their 9" rail for more real estate.
http://img.photobucket.com/albums/v83/jrhack79/guns/DSCN5336.jpg
http://img.photobucket.com/albums/v83/jrhack79/guns/DSCN5337.jpg

Looks awesome. Did you order it that way or did you do it yourself? Also, only problem I see with that setup is that you can't run a suppressor when the handguard covers up that much barrel. Think I'm gonna put an AAC 762-SDN-6 can on the PSD I'm looking to buy.

adh

02-12-11, 10:45

Hmac

02-12-11, 10:54

very nice...."Noveske Gunfighter charging handle"??? Maybe BCM???

http://noveskerifleworks.com/cgi-bin/imcart/display.cgi?item_id=556bcm&cat=164&page=1&search=&since=&status=

The BCM Gunfighter CH is now standard equipment on all Noveske rifles and uppers and can be bought separately as an accessory for the same price as the BCM CH. It's Noveske-labeled, however. It also has a nice bevel at the top edge of the locking lever, which decreases or eliminates the chance of getting one's finger pinched. I'm not sure if that same modification has been made to the BCM-labeled charging handles. Judging from the photos on BCM's website (http://www.bravocompanyusa.com/v/vspfiles/photos/BCM%20GFH%20Mod%204%20556-13.jpg), it doesn't appear so.

http://noveskerifleworks.com/imimg/556bcm_1d.jpg http://SSEquine.net/BCMGFH.jpg

adh

02-12-11, 11:44

AHH...I did not know that

pic thread

http://i226.photobucket.com/albums/dd192/adh_adh/BCM.jpg

wahoo95

02-12-11, 16:46

http://i210.photobucket.com/albums/bb244/a996hawk/IMG_4805.jpg

BSmith

02-12-11, 19:50

http://www.randomhostingsite.com/guns/sbr800.jpg

strgthnabilty

02-12-11, 23:54

Since I am waiting on my Stamp (mailed 2/9/11)....I know I have months to wait. I figured that I would post my specs.

R Guns lower
American Spirit Arms 7.5 inch .223/5.56 upper
Tapco buttstock
YHM Carbine Length free float
Magpul MBUS Backup Front and Rear sight
Noveske KX3 Flash suppressor
Tapco Vert. Grip
Tapco SAW Style pistol grip
Vortex SPARC Red Dot
Vortex killFLASH ARD

Should be a sweet and fun paper puncher when it all can be put together!!! I couldnt wait any longer its my first ever NFA purchase and I am like a 5 year old waiting on christmas!!!

GTF425

02-13-11, 18:04

Halfbreed_83

02-15-11, 14:36

LWRC PSD 5.56 I swapped out the carbine length rail for their 9" rail for more real estate.
http://img.photobucket.com/albums/v83/jrhack79/guns/DSCN5336.jpg
http://img.photobucket.com/albums/v83/jrhack79/guns/DSCN5337.jpg

Nice! I thought I was the only one who did this on their PSD. Here's my PSD 6.8spc:

http://img.photobucket.com/albums/v332/apex_sideway/Presentation1.jpg

I also installed a Blackriver Tactical muzzle break (to direct blast forward), HK 416 Pistol Grip, and a Magpul RVG, and a Magpul Ranger mag plate (not shown). I just ordered a BCM Gunfighter charging handle, B.A.D. Lever, and a VTAC sling . . . I throw updated pics when I get those installed.

Bourneshooter

02-15-11, 19:21

Updated picture of my SBR.

New Surefire flash hider and SR07 tapeswitch. Really like it.

http://i52.photobucket.com/albums/g33/Mattlevi/pirates/DSCN1258.jpg
http://i52.photobucket.com/albums/g33/Mattlevi/pirates/DSCN1254.jpg

snake9761

02-16-11, 12:14

Here is my SBR, sorry for the bad pics, my camera is on the fritz so I used my iPhone.

http://img.photobucket.com/albums/v134/srstrait/61f24c61.jpg

http://img.photobucket.com/albums/v134/srstrait/a12506f4.jpg

cj5_dude

02-18-11, 19:54

https://www.m4carbine.net/attachment.php?attachmentid=7455&stc=1&d=1298079824
https://www.m4carbine.net/attachment.php?attachmentid=7456&stc=1&d=1298079824

Bourneshooter

02-18-11, 20:12

https://www.m4carbine.net/attachment.php?attachmentid=7455&stc=1&d=1298079824
https://www.m4carbine.net/attachment.php?attachmentid=7456&stc=1&d=1298079824

Looks nice. What barrel did you use? The VIS really is one of the nicer uppers in the looks department.

cj5_dude

02-18-11, 22:54

It's a Noveske 10.5 light shorty low pro painted in FDE with a Battlecomp 1.0 on the end.

ssracer

02-18-11, 22:57

this thread is killing me. I have a lower on the way for an SBR build. Unfortunately it won't get much further than that till tax time next year. Lots of time to look at all these pics and nail down exactly how I want to do it

Bowser

02-19-11, 07:03

[IMG]http://i134.photobucket.com/albums/q109/eagle5_stl/MK18%20FSP%20RIS%20II/P1030418_2.jpg[IMG]

[IMG]http://i134.photobucket.com/albums/q109/eagle5_stl/MK18%20FSP%20RIS%20II/P1030421_2.jpg[IMG]

I love that mk18 fsp rail!

BAC

02-19-11, 08:02

http://img.photobucket.com/albums/v83/jrhack79/guns/DSCN5337.jpg

How do you like the Levang? Have you had the chance to compare it to other popular muzzle devices? I have one that I picked up a few years ago on sale and I was wondering if it'd work well on an SBR.

-B

S197Shelby

02-19-11, 09:52

Bourneshooter

02-19-11, 13:45

Looks like a 10.5"? How well does the ACS balance that out?

It is a 10.5". The ACS balances perfect because of the heavy barrel and rail forend. With both the A2 flash hider and the Surefire flash hider I hardly have any recoil.

Sprocketeer

02-20-11, 15:46

Spikes Tactical / BCM 12.5" Kino w/ 9" SAR

http://img715.imageshack.us/img715/8694/dscn0142s.jpg

http://img3.imageshack.us/img3/6495/dscn0140v.jpg

Hydguy

02-24-11, 19:11

My SBR:
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs890.ash1/179796_10150134481776488_748166487_8474903_1622664_n.jpg

LWRCi Piston 10.5" upper
Compact ACOG in LaRue Mount
Suerfire G2 in LaRue Mount
Magpul MBUIS/AFG/UBR/MIAD Grip
Geissele Super Semi-Automatic Trigger
Vickers Sling
That other Board's lower...

Will soon have a AAC Blackout suppressor and an AAC M4-2000 can on it..

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs908.ash1/181605_10150135912216488_748166487_8497093_3300125_n.jpg
The SBR I built for my dad
Noveske Switchblock 10.5 w/AAC Blackout FH
Comp M3 sitting in a LaRue Mount
Magpul UBR/AFG2/Moe Grip
Troy BUIS
CMMG Lower
RRA 2 Stage trigger

jwfuhrman

02-25-11, 22:44

Mk18 Mod 1 clone

10.5in Bushmaster Barrel(ya ya, I had it left over from a older gun)
BCM BCG
DD LPK
Vltor A5 Buffer System
MI 10in T-series Rail
BattleComp 1.0
Burris 4x
Burris PREP

Rustoleum Earth Brown paint on the upper/lower and rail

http://i6.photobucket.com/albums/y201/paintballaddict/180416_10150139201732090_502612089_7955892_8350271_n.jpg
http://i6.photobucket.com/albums/y201/paintballaddict/183536_10150139201987090_502612089_7955897_7440327_n.jpg

sweatpants

02-26-11, 00:45

https://lh6.googleusercontent.com/_4LfurYXu6jY/TWgG7pN3cLI/AAAAAAAAA-A/ZhRx-aPcFu8/s912/IMG_3515.JPG

https://lh3.googleusercontent.com/_4LfurYXu6jY/TWgHFCyOMBI/AAAAAAAAA-E/SrFkE4xjY2Y/s912/IMG_3507.JPG

https://lh5.googleusercontent.com/_4LfurYXu6jY/TWgHVo1at2I/AAAAAAAAA-c/z8bSBqu0OSk/s912/IMG_3504.JPG

https://lh6.googleusercontent.com/_4LfurYXu6jY/TWgPnNKBMtI/AAAAAAAAA-0/OpxfTbKPucU/s576/IMG_3513.JPG

BCM UPPER/LOWER
GEMTECH HALO 09+
DD 10.3 LW
DD 9.0
BC 2.0
AIMPOINT T1 ON KAC
SF X300
KAC MICRO FS
KAC 300M RS

variablebinary

02-26-11, 06:22

M4 type build

http://i1098.photobucket.com/albums/g377/VariableB/firearmspics/M4.jpg

Enoc

02-27-11, 14:30

http://i929.photobucket.com/albums/ad136/Nevadafun/IMG_0644.jpg

Mega

02-27-11, 14:33

http://gallery.me.com/kevinfarrell/100158/DSCN0008_4/web.jpg

Sprocketeer

02-27-11, 17:14

https://lh5.googleusercontent.com/_4LfurYXu6jY/TWgHVo1at2I/AAAAAAAAA-c/z8bSBqu0OSk/s912/IMG_3504.JPG

BCM UPPER/LOWER
GEMTECH HALO 09+
DD 10.3 LW
DD 9.0
BC 2.0
AIMPOINT T1 ON KAC
SF X300
KAC MICRO FS
KAC 300M RS

sweatpants,

How do you like the BC 2.0/HALO setup? That is exactly what I was thinking about going with. Can you run it without hearing protection?

ALCOAR

02-28-11, 15:57

http://i53.tinypic.com/2czox39.jpg

Cincinnatus

02-28-11, 16:01

http://i53.tinypic.com/2czox39.jpg

The little rifle that could--and damn, she's sweet!

Lucke551

02-28-11, 16:44

I've tried to download the Jpegs and it said failure on all of the pics...little help please I want to show them to you!

Thanks...Evan:fie:

Hmac

02-28-11, 17:03

You have to either attach the photos by selecting "manage attachments" and upload them from your computer, or you can put them on a website of some some kind and link them, which IMHO works better.

Lucke551

02-28-11, 17:08

Hey Hmac...thats what I tried to do but when I tried to download from my computer it fails...very frustrating!

Hmac

02-28-11, 17:24

Note the image size constraints. Posting images at attachments has significant limitations. Not so much if they're hosted somewhere else.

ALCOAR

02-28-11, 23:43

The little rifle that could--and damn, she's sweet!

Thanks, it might be little, but the bark is sure loud enough:cool:

http://i53.tinypic.com/2zrj8co.jpg

Enoc

03-01-11, 17:39

http://i929.photobucket.com/albums/ad136/Nevadafun/IMG_0646.jpg

Lucke551

03-03-11, 07:08

I think I figured out how to do this...here is the list
Rock River 10.5 A4
Noveske KX4
Ergo grip
Magpul MOE RVG Vertical foregrip
Magpul BAD lever
Magpul Mubus front sight
Magpul Mubus rear sight
Magpul MOE stock
Yankee Hill Specter Forearm
Oversize mag release
UTG weapon light
Vortex Sparc red dot
Gemtech Trek suppressor
Viking Tactics sling

superchi

03-03-11, 12:53

https://lh5.googleusercontent.com/_ik1anMMYkmI/TWk9z2VYXmI/AAAAAAAAAps/KhcPzVupZdE/s912/DSCN0261.JPG

foxjordan22

03-06-11, 07:21

PWS 12.5
AAC SPR-M4 on the way.

http://a1.l3-images.myspacecdn.com/images02/150/754a01b46786457fb34c1e6d03d36ecf/l.jpg

Mega

03-06-11, 07:23

Nice 12.5" fox.
Here is mine.

http://gallery.me.com/kevinfarrell/100158/DSCN0002_4/web.jpg

variablebinary

03-08-11, 03:48

http://i1098.photobucket.com/albums/g377/VariableB/firearmspics/LMTm4.jpg

Along with the classic MK18, I've always liked the Force Recon build.
http://www.americanspecialops.com/images/photos/meu-soc/force-recon-m4-eotechs.jpg

foxjordan22

03-08-11, 19:54

Nice 12.5" fox.
Here is mine.

http://gallery.me.com/kevinfarrell/100158/DSCN0002_4/web.jpg

thanks. nice build, what upper are you running?

Mega

03-08-11, 20:08

thanks. nice build, what upper are you running?

It's a mutt upper.
Bushmaster housing, BCM FA BCG with a Gunfighter CH, LaRue 11" rails, Magpul, Noveske, Aimpoint... everyone is represented. :D

bleaman225

03-09-11, 11:14

https://lh6.googleusercontent.com/_4LfurYXu6jY/TWgPnNKBMtI/AAAAAAAAA-0/OpxfTbKPucU/s576/IMG_3513.JPG

I like that pic.

And BTW, those are some pimp-ass sling attachment points. Diggin' it!!

m249saw

03-09-11, 20:57

http://i5.photobucket.com/albums/y158/m249saw/sbr-1.jpg

Just awaiting the NT4-QDSS. Wondering if my X300 is going to melt though, lol

ALCOAR

03-09-11, 21:07

http://i5.photobucket.com/albums/y158/m249saw/sbr-1.jpg

Just awaiting the NT4-QDSS. Wondering if my X300 is going to melt though, lol

Looks excellent....having the world's finest controls doesn't hurt either:cool:

m249saw

03-10-11, 04:47

Thank you kind sir

Cincinnatus

03-10-11, 08:50

http://i5.photobucket.com/albums/y158/m249saw/sbr-1.jpg

Just awaiting the NT4-QDSS. Wondering if my X300 is going to melt though, lol

Looks good!
As for the X300, just move it back a couple notches and you'll be fine. ;) Or maybe get a Battle Comp to diffuse the blast more so it's not directed right into your lens? :D
Have you tried shooting it where it is mounted to see if it is much of a problem?

m249saw

03-10-11, 08:54

Not yet, just got the X300 yesterday. I wont be as concerned when the NT4 is on there.

Ill move it back a few but I want to make sure I can turn it on easily with my thumb. Where its at now works pretty well with that.

FPembleton

03-10-11, 16:35

Finally got around to having this Noveske upper finished that I had sitting around for a year.

http://farm6.static.flickr.com/5133/5516092708_5ff2c89d70_b.jpg

dangerdan

03-10-11, 16:48

http://img.photobucket.com/albums/v37/ermey/Guns/101_0017.jpg
http://img.photobucket.com/albums/v37/ermey/photo3.jpg
http://img.photobucket.com/albums/v37/ermey/photo2.jpg

Seaslug

03-19-11, 21:18

Started with a complete Daniel Defense Mk18 upper, and went a little crazy from there... :D

http://i101.photobucket.com/albums/m49/bsimpson23/DSCN2809.jpg

http://i101.photobucket.com/albums/m49/bsimpson23/DSCN2817.jpg

http://i101.photobucket.com/albums/m49/bsimpson23/DSCN2814.jpg

sgtbutt

03-22-11, 18:43

Here's my SBR that I was just approved. I have it in a Fishnet patern and love it so far. Took a couple different days to get all the parts done but I'm extremely pleased. I'll get some shots taken the next time I'm banging away.

RRA Lower
RRA 2 stage LPK
MIAD
CTR with Palmetto State Armory MilSpec RE kit
B.A.D. Lever
Magpul Trigger Guard
DD Single Point Sling Mount
ADS Upper
ADS 11.5" 1 in 7 twist
Larue Handguard
YHM flip FSB
PWS FSC556
Troy BUIS
BCM Gunfighter CH
Rail Ladders and Tango Down rail panels
Stippled AFG2
TA 26 1.5 Mini ACOG
Surefire Scout
BFG Padded sling hit with Krylon

Onto the pictures
http://i767.photobucket.com/albums/xx320/sgtbutt/DSCF1107.jpg
http://i767.photobucket.com/albums/xx320/sgtbutt/DSCF1103.jpg
http://i767.photobucket.com/albums/xx320/sgtbutt/DSCF1104.jpg

sabresbrs

03-24-11, 19:17

Here is my SBR with and without can.

Sabre Defence 11.5
-magpul moe grip, ctr stock, one point sling attachment
-troy 7 inch drop in rail w/KAC panels
-daniel defense offset light mount w/streamlight pro tac light
-aac 18t mount
-lmt rear sight
-pri gas buster charging handle
-can is an AAC M-4 1000

Gunzfcc

03-30-11, 08:11

These are my newest toys sitting at home waiting for the attachments.
POF up and down with the exception of the Magpul gear. Thinking Elcan 1x/4x SpecterDR Optical Sight With 7.62 Ballistics for the 7.62 offering (mine) and Surefire X300 w/ XT07 switch for lights on both. The 5.56 is for the wife to run. Gonna try to keep them as light as possible! Gotta change out the FH for my M4-2000 and looking to get a AAC 7.62-SDN with deployment savings!

Enjoy I know I will. (Sorry for the crappy IPhone pic)

karmapolice

03-30-11, 16:17

My new Knights SR-15 E3, I cannot wait to get the paperwork back on this (my first SBR). :D

http://farm6.static.flickr.com/5260/5575340106_f053406184_b.jpg

ZX672

03-30-11, 16:21

Very jealous!

jwfuhrman

03-30-11, 17:26

BCM 12.5 upper
Vtac 11in Extreme
BattleComp 2.0
Burris XTR 1-4x24

http://i6.photobucket.com/albums/y201/paintballaddict/WP_000143-1.jpg
http://i6.photobucket.com/albums/y201/paintballaddict/WP_000145-1.jpg
http://i6.photobucket.com/albums/y201/paintballaddict/WP_000144.jpg

ALCOAR

03-30-11, 17:55

Sweet setup JW, that's what I call a CQB "outdoor";)

jwfuhrman

03-30-11, 21:08

I call her Katrina but CQB Outdoor works too lol.... as does my GPR (General Purpose Rifle)

Fills the role of needing a Rifle that will work from 0-300. This rifle does that.

Norinco

03-30-11, 21:23

http://farm6.static.flickr.com/5260/5575340106_f053406184_b.jpg

DEAR GOD!!

CoryCop25

03-30-11, 21:48

BCM 12.5 upper
Vtac 11in Extreme
BattleComp 2.0
Burris XTR 1-4x24

How do you like the optic? I just put one on my 6.8 with a GG&G QD mount but have not gotten a chance to take it out to shoot it yet.

Mr. Goodtimes

03-30-11, 22:37

Awesome rifle Karma Police. I'm hoping that my next rifle will be a KAC. I love their stuff and their a local Florida company. If I had $2300 laying around I would have made my first AR a Knights too lol.

jwfuhrman

03-31-11, 06:08

How do you like the optic? I just put one on my 6.8 with a GG&G QD mount but have not gotten a chance to take it out to shoot it yet.

Actually waiting on my specific optic to get here for this build, just running this for now. Ive been using the Burris XTR 1-4x24 on my 3 gun rifle for the last year and a half. Hasn't let me down yet.

karmapolice

03-31-11, 06:27

DEAR GOD!!
:D I can't wait to go blaze with it and see how it shoots, I am probably going to have to pick up a regular SR15 here soon, but I am going to spend some money setting this up and more training classes before that.

Awesome rifle Karma Police. I'm hoping that my next rifle will be a KAC. I love their stuff and their a local Florida company. If I had $2300 laying around I would have made my first AR a Knights too lol.

Haha thanks, this in no way is my first AR I've had my fair share and still have others. This is just my first SBR AR, I have been wanting one for awhile now and finally bit the bullet so to speak and was lucky enough to be able to have the KAC SBR's come out when I decided to get one.

Mr. Goodtimes

03-31-11, 08:45

Haha thanks, this in no way is my first AR I've had my fair share and still have others. This is just my first SBR AR, I have been wanting one for awhile now and finally bit the bullet so to speak and was lucky enough to be able to have the KAC SBR's come out when I decided to get one.

I shoulda said that differently, if I had the money I would have made a KAC my first AR ;). Whats funny Is after about a year and a half of building up my rifle I've got about $2000 tied up in it. More than that when I look at how many things I've tried, didn't like and then changed lol.

Out of curiousity, how do you like the 7in rail? I really like the flip up FSB but I dont really like 7in rails. I'm kind of surprised that KAC went with this setup when long rails seem to be what everybody is using these days. At 6'1" I have pretty long arms and prefer atleast a 10in rail. I have found 11 to sort of be my happy spot.

jwfuhrman

03-31-11, 10:00

I have found 11 to sort of be my happy spot.

thats what she said.....

karmapolice

03-31-11, 10:13

I shoulda said that differently, if I had the money I would have made a KAC my first AR ;). Whats funny Is after about a year and a half of building up my rifle I've got about $2000 tied up in it. More than that when I look at how many things I've tried, didn't like and then changed lol.

Out of curiousity, how do you like the 7in rail? I really like the flip up FSB but I dont really like 7in rails. I'm kind of surprised that KAC went with this setup when long rails seem to be what everybody is using these days. At 6'1" I have pretty long arms and prefer atleast a 10in rail. I have found 11 to sort of be my happy spot.

Ah cool, yeah I started learning the hard way about 5 years ago with what I wanted and have found mostly what works for me but it is a never ending process.

I am 6'6 with ape arms so the 7 inch rail is a little short to me, KAC is eventually going to do a run with the mid length URX rails on these but they are using all the 7inch urx and flip up fsp till they are out kind of thing. I would like to switch the rail for a URX III or the LW URX II and of course pin a low profile gas block but I may just pick up another upper but then I would like it to be an E3 upper so I get the benefits from the bolt, etc.

Norinco

03-31-11, 12:03

[QUOTE=karmapolice;955296]:D I can't wait to go blaze with it and see how it shoots, I am probably going to have to pick up a regular SR15 here soon, but I am going to spend some money setting this up and more training classes before that.=QUOTE]

I would throw a T1 and a Battle Comp on there and call it a day. That thing is beautiful sir.

CoryCop25

03-31-11, 14:32

Actually waiting on my specific optic to get here for this build, just running this for now. Ive been using the Burris XTR 1-4x24 on my 3 gun rifle for the last year and a half. Hasn't let me down yet.

I just got one with the fast fire attached to the top of it. I didn't like the fast fire so I put it on my 870. The optic is very clear and I am going to look at getting a cat tail for it. I got it from a friend who is a big Nightforce dealer and I'm sure he will talk me into one of those soon enough.... Nice SBR by the way....

Pic Thread:
http://i1014.photobucket.com/albums/af269/CoryCop25/ARs/IMAG0157.jpg

karmapolice

03-31-11, 16:06

I would throw a T1 and a Battle Comp on there and call it a day. That thing is beautiful sir.

Thanks!! Thats the main plan plus a scout light in a gs or dd mount, possibly might run the new KAC MAMS comp/suppressor mount when they come available for 5.56.

edit-pic thread

http://farm6.static.flickr.com/5174/5569293598_c1aa9fa3b1_b.jpg

gun71530

04-01-11, 19:10

LMTRocks

04-01-11, 22:51

http://i320.photobucket.com/albums/nn346/gunguyshots/P6150001-1.jpg

http://i320.photobucket.com/albums/nn346/gunguyshots/68SBRreduced.jpg

TRUST8383

04-01-11, 23:50

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/DDM4/MK18/6037a366.jpg

http://i977.photobucket.com/albums/ae253/JFLOINDUSTRIES/DDM4/MK18/4bb4fd38.jpg

buddyhoohaw

04-02-11, 18:02

SCAR 16s CQC with Surefire 300A, Laser Devices DBAL I2 and Eotech XPS3-0

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16-001.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16-002.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16-003.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16-004.jpg

Cheers

HK51Fan

04-02-11, 19:17

Nice set up!

Not a bad way to spend 5K!

HK51Fan

04-02-11, 19:22

My new Knights SR-15 E3, I cannot wait to get the paperwork back on this (my first SBR). :D

http://farm6.static.flickr.com/5260/5575340106_f053406184_b.jpg

Can you explain the placement of the Knights grip piece? I know the principle behind them and thought they were supposed to be flipped around the opposite direction you have your's mounted.?

karmapolice

04-02-11, 20:43

Can you explain the placement of the Knights grip piece? I know the principle behind them and thought they were supposed to be flipped around the opposite direction you have your's mounted.?

That is the Gear Sector hand stop not the Knights hand stop, it is that way so I can use it as an index point and apply reward pressure with my hand to drive the gun into my shoulder. Some people use it the other way round as an index point/ a reminder where to not pass with their fingers but it would be a bad idea to me to push out forward on it as you would get a less stable shooting platform.

Edited: The KAC handstop is a great piece of kit and can be used in the same manner, I also have a Danger Close hand stop which is my favorite out of the three because it is low profile but gives the best purchase on my hand.

HK51Fan

04-02-11, 21:30

I thought that might be the case, but didn't want to assume. I hold the front of the magwell on my carbine and it looked like it might work well for my grip as well. Hence the question.

Thanks!

karmapolice

04-02-11, 21:48

I thought that might be the case, but didn't want to assume. I hold the front of the magwell on my carbine and it looked like it might work well for my grip as well. Hence the question.

Thanks!

Yes, I definitely recommend it especially over the magwell grip. The further your hand is out on the rifle (safely no grabbing barrel ;) ) the better, it gives you better control, less fatigue, etc.

Dolphinvet

04-03-11, 14:32

My 2 SBR's. I built both of them. On the left lots of Magpul equipment, upper is a 7.5" Douglas bbl and Noveskerail built by Ballistic Advantage. Very loud but I love the way it handles. On the right is a 10.5" upper by Rock River Arms, with a YHM stainless Phantom suppressor. Both rifles have Eotech sights. I also have my MK760 SMG present.:)https://www.m4carbine.net/attachment.php?attachmentid=7964&stc=1&d=1301859539
https://www.m4carbine.net/attachment.php?attachmentid=7965&stc=1&d=1301859559
https://www.m4carbine.net/attachment.php?attachmentid=7966&stc=1&d=1301859576

smullen

04-03-11, 16:15

Dolphinvet

04-03-11, 20:18

Strange, when I hit quote, I see the files, however, the did not display in the post... At least not on my screen...

Bloody hell they vanished. I must have messed it up. Will do again.
https://www.m4carbine.net/attachment.php?attachmentid=7975&stc=1&d=1301880803
https://www.m4carbine.net/attachment.php?attachmentid=7976&stc=1&d=1301880803
https://www.m4carbine.net/attachment.php?attachmentid=7977&stc=1&d=1301880803
https://www.m4carbine.net/attachment.php?attachmentid=7978&stc=1&d=1301881054

Ok, these are the weapons as described above. I hope they are visible now.

Enoc

04-04-11, 20:10

http://i929.photobucket.com/albums/ad136/Nevadafun/IMG_1108.jpg

Bowser

04-06-11, 14:08

SCAR 16s CQC with Surefire 300A, Laser Devices DBAL I2 and Eotech XPS3-0

[img]http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16-001.jpg[img]

[img]http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16-002.jpg[img]

[img]http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16-003.jpg[img]

[img]http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16-004.jpg[img]

Cheers

My new Knights SR-15 E3, I cannot wait to get the paperwork back on this (my first SBR). :D

[IMG]http://farm6.static.flickr.com/5260/5575340106_f053406184_b.jpg[IMG]

These are both amazing. I really like the SR15 SBR a lot, especially with that expensive folding GB FS lol.

How does the SCAR work out for you being a lefty?

Magic_Salad0892

04-06-11, 15:04

Thats the main plan plus a scout light in a gs or dd mount, possibly might run the new KAC MAMS comp/suppressor mount when they come available for 5.56.

Link, or explanation?

karmapolice

04-06-11, 15:15

Link, or explanation?

about the KAC mount/suppressor? Knights has a new design mount and suppressor they are R&Ding right now that hopefully will be produced here soon. The MAMs stands form multi axis mount and according to Kevin B. on the 7.62 guns decreases the recoil a large amount and makes the recoil impulse more straight back in to the shoulder. Also it does not need to be timed like the triple tap, and they are working on a 5.56 version as well and new cans utilizing the mount. There are pictures floating around on silencer talk from the shot/tour Knights hosted back a little while ago.

parishioner

04-06-11, 20:03

Link, or explanation?

http://silencertests.com/silencer-forum/viewtopic.php?f=91&t=69466&sid=d99b6339c98d6369a3eb8f159bddce89

Devildog0311

04-07-11, 11:45

Here's my two. The LMT doesn't look like an SBR, it is but it is a 14.5"

http://img.photobucket.com/albums/v408/gotm4/46ce7437.jpg
http://img.photobucket.com/albums/v408/gotm4/184e060d.jpg

http://img.photobucket.com/albums/v408/gotm4/36cf82ce.jpg

What barrel length is the gun in the first pic? and what length hand guards do you have on it?

Cincinnatus

04-07-11, 22:27

What barrel length is the gun in the first pic? and what length hand guards do you have on it?

It looks to be either an 11.5 or 12.5 which would make the rail a rifle-length or 12" rail.

Packman73

04-07-11, 23:26

Getting it ready for the new rail.
http://www.tacomaworld.com/gallery/data/500/medium/April_2011_002.JPG (http://www.tacomaworld.com/gallery/showphoto.php/photo/149454/cat/500)

superchi

04-08-11, 04:12

https://lh5.googleusercontent.com/_ik1anMMYkmI/TZu5MYUQKyI/AAAAAAAAAvs/QA-uIrhpAog/s912/IMG_0149.JPG

m249saw

04-08-11, 08:08

^^^ On of my favorites. Nicely done

Th3Revreant

04-08-11, 18:46

Freshly approved, my first sbr build. High Standard lower with magpul furniture, 11.5" Stag LE Lefthanded Heavy Profile upper with diamondhead buis. TA47-2 on the way to completed. Dressed in magpul.

http://i705.photobucket.com/albums/ww58/reaperpaintball08/DSCN2958.jpg

http://i705.photobucket.com/albums/ww58/reaperpaintball08/DSCN2962.jpg

toekneeg

04-08-11, 20:48

I think SBRs are the only rifle that iron sights make the gun look amazing. Love the diamond sights.

Th3Revreant

04-08-11, 22:07

I think SBRs are the only rifle that iron sights make the gun look amazing. Love the diamond sights.

Completely agree. More I look at it, the more I like the idea of running irons straight with no optics.

dudshep31

04-13-11, 14:06

8094
8095
The lmt isn't quite done. waiting on a t-1 and a x300

ROGOPGEAR

04-13-11, 17:35

Completely agree. More I look at it, the more I like the idea of running irons straight with no optics.

heh? there is so much wrong with that statement I don't even know where to start...:suicide2:

Th3Revreant

04-13-11, 22:28

heh? there is so much wrong with that statement I don't even know where to start...:suicide2:

means im just running irons on my rifle.....:eek:

wahoo95

04-13-11, 23:09

http://i210.photobucket.com/albums/bb244/a996hawk/IMG_5541.jpg

karmapolice

04-15-11, 15:10

added a tango down bg-17, BFG Vickers padded sling, and KAC hand stop to my Knights SBR. Still waiting for the paperwork to get back, it sitting at my class III dealer.

http://farm6.static.flickr.com/5229/5622220157_7490f351f3_b.jpg

jcote258

04-15-11, 18:16

-DD MK18 RIS II Rail W/Gas Block Cut out
-Noveske Switchblock
-10.5 Inch Fluted BBL
-YHM suppressor adapter/flash hider
-CompM4
-Troy Flip Sights
-missing something I'm sure

http://imgsrc.com/imgbank/sbr1.jpg
http://imgsrc.com/imgbank/sbr2.jpg

usmcvet

04-17-11, 15:18

My Irons Only upper:
BCM 11.5''bbl
Colt SP1 upper
BCM Medium Gunfighter CH
BCM FA BCG
Sully Stock

The neutered M16 lower is not mine

http://m4carbine.net/picture.php?albumid=374&pictureid=1897

http://m4carbine.net/picture.php?albumid=374&pictureid=1896

jwfuhrman

04-21-11, 18:03

Dont mind the shitty scope, its a Burris 4x. Waiting on my new TR24R 1-4x24 to come in.

BCM 12.5 upper
Vtac TRX Extreme
BattleComp 2.0

http://i6.photobucket.com/albums/y201/paintballaddict/WP_000175.jpg
http://i6.photobucket.com/albums/y201/paintballaddict/WP_000176.jpg

dudshep31

04-22-11, 12:50

Finally finished my LMT. sorry crappy cell phone pic

AggiePhil

04-22-11, 18:16

8094
8095
The lmt isn't quite done. waiting on a t-1 and a x300

Can you make those images larger please? They're currently showing up only as thumbnails.

buddyhoohaw

04-23-11, 08:01

SCAR16s CQC

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16-011.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16-012.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16-013.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16-014.jpg

Cheers

toekneeg

04-23-11, 09:22

^^ Would you mind posting specs on the barrel of your SCAR?

Length of barrel, any mods to the gas port?

tx1021

04-23-11, 17:56

http://i28.photobucket.com/albums/c249/Tx1021/IMG_4815.jpg

http://i28.photobucket.com/albums/c249/Tx1021/IMG_4682-1.jpg

Hmac

04-23-11, 18:26

Was going to be a lightweight, but ultimately came in at 6 lb 4 oz. Oh well.

http://SSEquine.net/sbrgreen4s.jpg

J-Dub

04-23-11, 18:36

Hmac, is that a 12.5" barrel?

Hmac

04-23-11, 19:18

Hmac, is that a 12.5" barrel?

BCM Standard 11.5. I had ADCO pin the FSB.

one

04-24-11, 01:58

http://img.photobucket.com/albums/v162/goddamnit/Assault%20weapons/SBRDDMk18RISII.jpg?t=1303627394

LMT 10.5 upper
DD Mk 18 RIS II
PRI Gasbuster charging handle
XTM rail panels
Surefire M600C scout light
Surefire SR07 rail mounted tape switch
Gear sector offset mount
LaRue FUG foregrip
Matech BUIS
KAC forward BUIS
AAC M4 1000 suppressor with 18 tooth brake
LMT SOPMOD stock
Magpul MIAD grip
Vicker's 2 pt sling

Ak44

04-24-11, 03:08

BCM Standard 11.5. I had ADCO pin the FSB.

I'm pretty much going from a MK18 clone to your build, nice and clean!

buddyhoohaw

04-25-11, 06:29

Here's a few side by side shot's of mine and Stephen H's CQC's which offers a visual comparison of available components. Mine is slightly heavier due to the Branham rail and Eotech.

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16s-013.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16s-014.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16s-015.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16s-016.jpg

Cheers

snaf

04-25-11, 13:58

damn...i want a scar cqc now after seeing those pics. you're a lefty too?

sweatpants

04-26-11, 10:12

https://lh6.googleusercontent.com/_4LfurYXu6jY/TbXcYeTD7BI/AAAAAAAABbY/TRAwTZnt_Yg/s800/IMG_3962.JPG

jwfuhrman

04-27-11, 18:38

While I'd LOVE to get a Scar and SBR it, I can't justify the initial cost of just the gun.

Made some changes to my 12.5 "General Purpose Carbine"

Changed:

11in Vtac TRX Extreme to a 10in MI Rail(Had it on hand, using until I find something else)
Vltor A5 w/ MagPul ACS

Trying to decide what optic I want. I'm down to the TR24-G I think. Just not 100% sure yet.

Waiting on my Troy BUIS.

http://i6.photobucket.com/albums/y201/paintballaddict/WP_000193.jpg
http://i6.photobucket.com/albums/y201/paintballaddict/WP_000192.jpg
http://i6.photobucket.com/albums/y201/paintballaddict/WP_000194.jpg

johnson

04-27-11, 19:54

Why the change from the VTAC to MI handguard?

jwfuhrman

04-27-11, 20:22

tryin something different. it balances better with the extra weight of the ACS and A5 on the back. I had the MI rail laying around from an older build. Just using this until I figure out what route I wanna go, probably a DD Lite of some kind

Wormydog1724

04-27-11, 20:30

I love my TR24G. Its a perfect all purpose optic if you don't mind the added weight. I also have a TA44SR-10 ACOG which is nice and light but I still am getting used to the reticle. Also an Eotech is a good choice but the always popular Aimpoint T-1 wins out in battery life. Of course the Trijicon's never need batteries. Ever.

Just wish I had an SBR.

jwfuhrman

04-27-11, 20:49

Between growing up hunting, to 3gun, I'm so used to looking thru a scope, mostly a 4x scope, that if I could afford it, I'd really like an ACOG with the Horse Shoe reticle, but the TR24G will be fine.

ALCOAR

04-27-11, 21:00

Go with the TR24 JW...that's a fantastic play for our similar shared vision of a GP or Outdoor CQB type carbine:)

FYI...AR's don't work when they get wet, or least ones that don't have a piston;)

pic.
http://i53.tinypic.com/2hfo2mt.jpg

Magic_Salad0892

04-28-11, 04:22

Cincinnatus

04-28-11, 08:34

Great pics, Mr. Fuhrman! As far as swapping the rail out later, if this one works and balances, why bother?
Trident's right, you need to watch LWRC's little vid of how piston ARs fire full auto, problem free after being immersed in a pond. :jester:

jwfuhrman

04-28-11, 09:08

I probably wont switch rails, but the MI was bought for a "Cheap build" using an old bushmaster, which is no longer being used so i thru it on here. I rly want a Mk18 RIS II, but thats down the road.

I know AR's dont like water, but since I've gotta finish the Ark Im build since its been raining for almost 40 days and nights already, the way the water was beaded up on my Jeep, it would make for a good picture. Then as soon as i get setup to take the pics(taken with my phone btw), it started freaking raining again....

Dozer

04-28-11, 09:38

http://i140.photobucket.com/albums/r29/l_jimenez30/IMG_4577.jpg

Cincinnatus

04-28-11, 09:41

http://i140.photobucket.com/albums/r29/l_jimenez30/IMG_4577.jpg

Nice blaster!!!

ALCOAR

04-28-11, 13:54

Trident.

Why'd you flip out the selector switch with another one that was 90 degrees?

If you were gonna flip it out, wouldn't you have gone with the BAD-ASS 45 degree one?

Also I was wondering why the 300m sight? (I've always liked the 200-600m one more.)

I got a 45 bad-ass aboard the cqb...along with all my other rifles, only way I roll:cool:

I equally like the micro 200-600m sight as I run one on my mrp recce and I'd like to swap out the troy's on my mrp spr for a set of micros to include the rear 2-600m sight. I love the KAC micro's! The micro 300m rear is more tailored for this CQB build.

http://i888.photobucket.com/albums/ac81/trident1982/IMG_4298-1.jpg

AggiePhil

04-28-11, 16:41

Luke_Y

04-28-11, 16:47

Specs on the rifle please. Didn't think KAC made an SBR.

Ha, you must have missed that it was TRIDENT82 posting. It's TRIDENT so it's an LMT CQB MRP upper of course ;) :p

PS TRI, love that rifle.

AggiePhil

04-28-11, 16:53

OK. Is it the 12"? I'm looking at their website right now. Looks like 12" is the shortest piston upper they offer while 10.5" is the shortest DI upper they offer. Hard for me to see if his is a piston gun due to the rail covers and flashlight (I'm obviously not too good at ID'ing the LMT guns).

Magic_Salad0892

04-28-11, 16:57

Specs on the rifle please. Didn't think KAC made an SBR.

CQB MRP Upper. Knights E3 lower.

Knights does make an SBR. Currently using old Vero Beach lowers, CTR stock, older gas block flip up sights, 7'' URX II rails, and 11.5'' barrel.

Knights will be building them on E3 SBR lowers at some point in the future from what I understand.

Uglyguns

04-28-11, 16:58

Specs on the rifle please. Didn't think KAC made an SBR.

They did, but that's not it. Kac/ LMT MRP collaboration, I'm sure he will tell you. :D

Edit: Damn, I guess I posted a bit late huh...

V/r
Uglyguns

Uglyguns

04-28-11, 17:05

ALCOAR

04-28-11, 17:54

Specs on the rifle please. Didn't think KAC made an SBR.

Here ya go pal....:)
http://i51.tinypic.com/9hj8g2.jpg

adh

04-28-11, 21:25

http://i140.photobucket.com/albums/r29/l_jimenez30/IMG_4577.jpg

Nice set up.
How do you have that handstop attached to the forearm? Almost looks like it's attached to a short piece of rail, but it's right above a the black in the multicam background and I'm unsure.

Dozer

04-29-11, 13:48

Nice set up.
How do you have that handstop attached to the forearm? Almost looks like it's attached to a short piece of rail, but it's right above a the black in the multicam background and I'm unsure.

It's the same rail that comes with the Troy handguard, I just had a machine shop machine down 0.110" to allow to sit closer to the handguard. I personally felt that it sat too proud of the handguard for the way I shoot and the handstop I was looking to use. I hope this helps.

jwfuhrman

04-29-11, 16:47

Have my 3-9x40 on to do some accuracy testing. Hoping to get my TR24G in the next couple weeks once I get school paid for.

http://i6.photobucket.com/albums/y201/paintballaddict/WP_000201.jpg

Zhurdan

04-29-11, 17:29

Hmm.. never posted in this thread. Been checking it for a while, dunno why I didn't post mine.

Noveske 10.5"
http://i143.photobucket.com/albums/r127/Zhurdan/Gun%20stuff/IMG_0690.jpg
Same rifle during a MD class in Pueblo,CO. That's one hell of a camera that took the pic!
http://i143.photobucket.com/albums/r127/Zhurdan/Magpul%20class/pueblo4-4-2010-55.jpg

and another "little one" that I just had to have. Yeah yeah, I know. Stupid laser is gone, got it in a trade years ago and thought what the hell. Quickly learned I don't like lasers, especially ones not mounted over the bore.

http://i143.photobucket.com/albums/r127/Zhurdan/Gun%20stuff/P90-02.jpg

adh

05-01-11, 11:33

It's the same rail that comes with the Troy handguard, I just had a machine shop machine down 0.110" to allow to sit closer to the handguard. I personally felt that it sat too proud of the handguard for the way I shoot and the handstop I was looking to use. I hope this helps.

Thanks....pic thread

http://i226.photobucket.com/albums/dd192/adh_adh/BCM.jpg

buddyhoohaw

05-01-11, 19:12

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16s-017.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16s-019.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16s-021.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAR16s-022.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/FN%20SCAR/SCAr16s-024.jpg

m249saw

05-01-11, 20:52

^^^^ Pure sex

chillindrdude

05-01-11, 21:17

thats a sick blaster buddy

kratosx9

05-02-11, 16:30

I got a 45 bad-ass aboard the cqb...along with all my other rifles, only way I roll:cool:

I equally like the micro 200-600m sight as I run one on my mrp recce and I'd like to swap out the troy's on my mrp spr for a set of micros to include the rear 2-600m sight. I love the KAC micro's! The micro 300m rear is more tailored for this CQB build.

http://i888.photobucket.com/albums/ac81/trident1982/IMG_4298-1.jpg

I never tire of looking at ur pristine SBR trident... it looks like you;re not using her at all

buddyhoohaw

05-03-11, 08:23

Noveske Switchblock 10.5" Lo-Pro VIS w/ Elcan Spectre DR, Surefire FA556-212A Suppressor and Surefire M300A Scout light.

http://i5.photobucket.com/albums/y198/buddyhoohaw/Noveske/IMGP9158.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/Noveske/IMGP9162.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/Noveske/IMGP9160.jpg

Cheers

Dolphinvet

05-03-11, 16:26

http://i1080.photobucket.com/albums/j331/Dolphinvet/BinLadenBullet.jpg

I think the title says it all. :laugh:

ALCOAR

05-04-11, 21:27

I never tire of looking at ur pristine SBR trident... it looks like you;re not using her at all

Thanks friend, the little one lately has seen some some heavy action:)

http://i54.tinypic.com/m7f8cp.jpg

amac

05-04-11, 21:45

Thanks friend, the little one lately has seen some some heavy action:)

http://i54.tinypic.com/m7f8cp.jpg

Forgive me for asking, but what upper are you running on the SBR?

parishioner

05-04-11, 22:10

Forgive me for asking, but what upper are you running on the SBR?

Its an LMT 10.5" MRP CQB

ColdDeadHands

05-05-11, 07:29

Forgive me for asking, but what upper are you running on the SBR?

details are toward top of the page...

buddyhoohaw

05-05-11, 14:51

5.56 MRP

http://i5.photobucket.com/albums/y198/buddyhoohaw/LMT/DSC_0439.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/LMT/DSC_0438.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/LMT/DSC_0437.jpg

Cheers

Th3Revreant

05-05-11, 22:44

Finished her up two days ago, got my comp m2 in with arms 17 mount. Love it, first sbr build.

http://i705.photobucket.com/albums/ww58/reaperpaintball08/DSCN2967.jpg

http://i705.photobucket.com/albums/ww58/reaperpaintball08/DSCN2968.jpg

http://i705.photobucket.com/albums/ww58/reaperpaintball08/DSCN2969.jpg

M16MANIAC

05-09-11, 19:13

http://i449.photobucket.com/albums/qq212/KAB12869/SPRMuzzlebrake001.jpg
http://i449.photobucket.com/albums/qq212/KAB12869/SPRMuzzlebrake005.jpg
http://i449.photobucket.com/albums/qq212/KAB12869/SPRMuzzlebrake006.jpg
http://i449.photobucket.com/albums/qq212/KAB12869/SPRMuzzlebrake009.jpg
LMT MRP CQB upper with 12.5" barrel
Fail Zero BCG
Eotech 553
AAC SPR/M4 Muzzle brake
Troy BUIS
POF 416 Lower with Magpul goodies

Wormydog1724

05-09-11, 19:17

^^^^ DETAILS!!! please!

dcs12345

05-11-11, 11:22

http://i239.photobucket.com/albums/ff283/dcs12345/IMG_0484.jpg
Went the Trust route
BCM Standard 11.5" upper
RRA Lower (from the first AR I ever bought),
trust info engraved by Ident on the front of the mag well

MOE Stock and Handguard
Matech BUIS
Aimpoint M3 in LaRue mount
Miad grip

LMTRocks

05-11-11, 11:31

M16Maniac:
Nice MRP. The look with the POF lower is very clean.

OUTLAW-ONE

05-11-11, 13:44

http://i1080.photobucket.com/albums/j337/ert185/25c587ce.jpg

M16MANIAC

05-11-11, 16:29

http://i449.photobucket.com/albums/qq212/KAB12869/014-1.jpg

Mr. Goodtimes

05-11-11, 17:14

LMT MRP CQB upper with 12.5" barrel

AAC SPR/M4 Muzzle brake

Where did you get the 12.5in MRP barrel? I know they made a piston one but I was unaware they made a DI one?

Also, when did AAC start making an SPR M4 Muzzle brake?

M16MANIAC

05-11-11, 17:20

oooops

M16MANIAC

05-11-11, 17:21

Where did you get the 12.5in MRP barrel? I know they made a piston one but I was unaware they made a DI one?

Also, when did AAC start making an SPR M4 Muzzle brake? They just made 100 of them. Bought mine from Major Malfunction. You may still be able to get one if they are not all sold. I think Allen Arms got some also.

Adco cut down the barrel.

Th3Revreant

05-11-11, 18:58

Changed optics, loving this leupold prismatic.

http://i705.photobucket.com/albums/ww58/reaperpaintball08/DSCN2999.jpg

Cameron

05-16-11, 00:55

http://farm5.static.flickr.com/4141/5444140230_eb4ae80ea3_b.jpg
Lewis Machine & Tool 10.5" MK18 Aimpoint T-1

http://farm6.static.flickr.com/5173/5409059787_179aa27c66_b.jpg
Infiniti G37xS & Lewis Machine & Tool 10.5" MK18 EOTech XPS2-0

http://farm6.static.flickr.com/5057/5405316136_c4d9c9391a_b.jpg
Daniel Defense 16" Recce Leupold MK4 1.5-5x20mm & Lewis Machine & Tool 10.5" MK18 EOTech XPS2-0

Cameron

kwelz

05-19-11, 14:02

My paperwork just came in today.
Colt 6940 lower and BCG.
VLTOR VIS 10 inch upper.
11.5 inch BCM Cold hammer forged barrel.
M4-1000 Supressor
All the goodies you see.

No optic yet but It will get something temporary this weekend for the VSM class I will be attending. Paperwork came in just in time for it. =)

http://web.me.com/kwelz/Pictures/SBR.jpg