The Official SBR Picture Thread [Archive]

M4arc

06-07-06, 09:18

Post'em if you got'em :)

Here's my LMT 10.5" SBR:
- LMT lower with standard FCG
- LMT 6 position buttstock with H2 buffer
- LMT 10.5" upper
- LMT M16 carrier with MP'd CMT bolt & Wolff HD extractor spring
- PRI Gas buster Charging Handle
- Noveske Krink
- MI #17 two-piece rail
- Tango Down Vertical Grip
- Aimpoint M3 with 2MOA
- LaRue Cantilever mount
- YHM A1 BUIS

http://members.cox.net/mwinder3/images/lmt10_5L.JPG
http://members.cox.net/mwinder3/images/lmt10_5R.JPG

Griz

06-07-06, 09:28

http://www.skinwagon.com/guns/AR15_10inch.jpg

Mooneys

06-07-06, 21:33

http://img.photobucket.com/albums/v435/mooneys/GunPics/DSCN30892.jpg

http://img.photobucket.com/albums/v435/mooneys/GunPics/dscn30814.jpg

k9dpd

06-07-06, 22:05

http://img.photobucket.com/albums/v336/k9dpd/krink2.jpg

Boom

06-07-06, 22:39

Great pics. I'm counting the days for my paper work to come back. :D

Arock

06-07-06, 23:33

http://img.photobucket.com/albums/v109/4-Speed/SBR001_edited.jpg

El_Abogado

06-08-06, 19:28

SBR?

http://www.hunt101.com/img/412165.jpg

El_Abogado

06-08-06, 20:31

http://www.hunt101.com/img/412348.JPG

I don't remember where I saw this one, or whose it is, or what I was doing. But it's a nice blaster. . . .

Aubrey

06-08-06, 21:55

El Attornio,
Isn't that one of Yoda's light sabers? :D

GIFFMANN

06-08-06, 22:06

Here's mine with a couple of different uppers:

http://img.photobucket.com/albums/v424/giffmann/shorty010.jpg

http://img.photobucket.com/albums/v424/giffmann/shorty012.jpg

VA_Dinger

06-09-06, 18:30

http://img.photobucket.com/albums/v74/va_dinger/2006_0609LMT0009.jpg

LMT 10.5" upper receiver
PWA lower w/ ISMI buffer spring & LMT H2 buffer
LMT M16 carrier/LMT standard bolt w/ Wolff HD extractor spring & CRANE o-ring
LaRue 9.0
LaRue low profile gas block - Still need to get this permanently pinned.
LaRue BUIS
LaRue Eotech mount
EoTech 552
Tango Down grip
LMT Fixed front sight
LMT CH
Vltor stock and buttstock pad
Mix of Surefire & MagPul ladder panels
HK mag

Dport

06-09-06, 18:41

Got rid of the Krink I see.

VA_Dinger

06-09-06, 18:59

Got rid of the Krink I see.

It's not gone, just taking a break.

I would like to try it without the Krink for awhile. After that it will get remounted.

Griz

06-09-06, 20:55

It's not gone, just taking a break.

I would like to try it without the Krink for awhile. After that it will get remounted.

I took off my KX3 and tried my 10" with a Phantom... 1 trip to the range convinced me to put the KX3 back on and it is gonna stay on until I get a can :)

bigbore

06-10-06, 06:02

http://www.adcofirearms.com/test/sbr/testools.jpg

BravoCompanyUSA

06-10-06, 12:15

http://img.photobucket.com/albums/v445/bravocompanyusa/11ontable.jpg
One of my new favorates (yes, I am biased :) ) in plain jain T&E mode

http://img.photobucket.com/albums/v445/bravocompanyusa/TallyBCM11.jpg
All dressed up . . . .
KAC 10" FF RAS
S&B Short Dot
LT mount
Troy Front and Rear Sights
Vltor Stock
TD grip and covers
SF light

http://www.bravocompanyusa.com/photos/Troy%20MRF%20MX-3.jpg
This one left the shop yesterday. The new owner will dress it out with a KFH.
Otherwise, it's a LMT 10.5" with a 10" Troy Rail.

CapnCrunch

06-11-06, 19:36

http://img.photobucket.com/albums/v445/bravocompanyusa/TallyBCM11.jpg
All dressed up . . . .
KAC 10" FF RAS
S&B Short Dot
LT mount
Troy Front and Rear Sights
Vltor Stock
TD grip and covers
SF light

Darn you, I was going to use that pic ;)

More pics:
KAC 10" FF RAS
S&B Short Dot
LT SPR-E
Troy Front and Rear Sights
Vltor Clubfoot Carbine Stock (My favorite)
"Shotened" TD grip and covers
SF M600A w/ offset mount, LU60A, and FM63 IR filter
Vortex FS
CQD Sling Loop

http://img.photobucket.com/albums/v307/capcocrunchopoint/MK633MOD1-02.jpg
http://img.photobucket.com/albums/v307/capcocrunchopoint/MK633MOD1-04.jpg

Short 6.8 Stuff:

http://img.photobucket.com/albums/v307/capcocrunchopoint/DSC01753.jpg
http://img.photobucket.com/albums/v307/capcocrunchopoint/DSC01751.jpg
http://img.photobucket.com/albums/v307/capcocrunchopoint/DSC01748.jpg

watersniper

06-13-06, 13:00

Same registered lower, different uppers:

9mm W/Trinity can

http://img481.imageshack.us/img481/5703/9mm125jk.jpg (http://imageshack.us)

7.5" Mike Rock bbl(sold):

http://img476.imageshack.us/img476/4002/75upper027wh.jpg (http://imageshack.us)

11.5" Bushmaster 1-7" twist (sold)

http://img161.imageshack.us/img161/5867/115bushy012yu.jpg (http://imageshack.us)

My current offering- ADCO EXT 11.5"

http://img476.imageshack.us/img476/6382/extupper0033di.jpg (http://imageshack.us)

EXT upper with SRT 6.8SPC suppressor

http://img161.imageshack.us/img161/4085/extupper0057ht.jpg (http://imageshack.us)

altav

06-19-06, 20:05

http://www.mobilemediacorp.com/ar15/6933_m4200.jpg

DBautista

06-19-06, 20:35

11.5 Mutt with YHM rail etc.

I dont need the bells and whistles, I shoot fine with iron sights...

Pending YHM suppressor... All I need...

http://members.cox.net/dbautista4/SBR1.jpg

BravoCompanyUSA

06-19-06, 21:06

Darn you, I was going to use that pic ;)

In fairness, you did build up the carbine, set up the shot, and snap the picture . . . I should have let you post it :p

But I was just really fond of it . . . .

CapnCrunch

06-20-06, 21:56

Paul, you know I'm just joshin' with ya :)

Resq47

06-21-06, 01:01

El Attornio,
Isn't that one of Yoda's light sabers? :D

Certainly does look familiar ;)

Robb Jensen

06-23-06, 06:35

Here's my two. The LMT doesn't look like an SBR, it is but it is a 14.5"

http://img.photobucket.com/albums/v408/gotm4/46ce7437.jpg
http://img.photobucket.com/albums/v408/gotm4/184e060d.jpg

http://img.photobucket.com/albums/v408/gotm4/36cf82ce.jpg

Noveske

06-24-06, 20:25

12.5" Crusader w/ AAC SCAR-SD
https://www.secure-bin.com/noveskerifleworks.com/images/sbrpics.jpg

12.5" and 10.5" w/ LT 11.0 SBRS
https://www.secure-bin.com/noveskerifleworks.com/images/sbrpics_a.jpg

7.5" hanging around
https://www.secure-bin.com/noveskerifleworks.com/images/sbrpics_c.jpg

7.5" barrel
https://www.secure-bin.com/noveskerifleworks.com/images/sbrpics_d.jpg

BravoCompanyUSA

06-24-06, 20:39

Very nice John.

http://www.hunt101.com/img/412348.JPG

I don't remember where I saw this one, or whose it is, or what I was doing. But it's a nice blaster. . . .

I think (?) that is Pat's carbine.

Harv

06-25-06, 10:15

It is....

steezo757

06-30-06, 14:35

11.5 Mutt with YHM rail etc.

I dont need the bells and whistles, I shoot fine with iron sights...

Pending YHM suppressor... All I need...

http://members.cox.net/dbautista4/SBR1.jpg

DBautista - That looks very familiar :D

hetfield

07-05-06, 21:47

Just got it done last week:

http://img174.imageshack.us/img174/702/rocket31ez.jpg

bigbore

07-07-06, 14:16

http://www.adcofirearms.com/junkpics/dd7lite.jpg

KevinB

07-10-06, 07:52

10.5 LMT
Larue rail
Troy rear BIS
Larue 1.93
S&B Short Dot
Colt M4A1 lower

http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/RAIDPACK007.jpg

http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/Afghan-Embassy038.jpg

CapnCrunch

07-10-06, 20:24

Kev, what kinda can is that? Nice kit, btw ;)

KevinB

07-10-06, 21:32

Can is something from South Africa (beggars cant be chosers here...) I paid $200 for it - and it works okay - its not a KAC or OPSINC can but...

Josh-L

07-12-06, 16:52

http://members.cox.net/josh-l/VSBR3.JPG

Impact

07-12-06, 17:02

KevinB,

can we get more pics of that case setup ? very nice.
Thanks

VA_Dinger

07-12-06, 20:16

My old LMT/LaRue 9.0/Noveske 10.5" w/S&B Short Dot.

This picture is over a year old though. It has a Vltor stock now.

http://img.photobucket.com/albums/v74/va_dinger/2005_1210LMTSBR0035.jpg

sbrshooter

07-12-06, 22:18

i am new how do i post a pic ?
thanks sbrshooter

sbrshooter

07-12-06, 23:11

http://i98.photobucket.com/albums/l276/sbrshooter/P7080006.jpg
noveske 6.8/10.5..........5.56/11.5

KevinB

07-13-06, 06:59

KevinB,

can we get more pics of that case setup ? very nice.
Thanks

Sorry - the RSO took our M4's away due to our company defrauding the Dept of State :o
and I am leaving 30 july so I sold most of the mags etc I had here.

Here are some pics of the set up prior to its "retrival"

I love Mk262

http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/MAGS004.jpg

http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/MAGS001.jpg

http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/Kevin216.jpg

http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/Kevin115.jpg

http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/Kevin113.jpg

http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/Kevin078.jpg

and when someone borrowed my vert grip
http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/Kevin084.jpg

DocGKR

07-13-06, 10:37

A work rifle on the range--LMT Mk18 upper/Colt lower:

http://www.10-8forums.com/ubbthreads/postimages/11771-krink1.jpg

JLM

07-13-06, 12:42

My old LMT/LaRue 9.0/Noveske 10.5" w/S&B Short Dot.

This picture is over a year old though. It has a Vltor stock now.

http://img.photobucket.com/albums/v74/va_dinger/2005_1210LMTSBR0035.jpg

You wound up constructing your own "BL Grip" didn't you? How do you like that thing?

I run my shit all the way out front too, due to being 'vertically challenged' like Grant :o

VA_Dinger

07-13-06, 13:20

You wound up constructing your own "BL Grip" didn't you? How do you like that thing?

I run my shit all the way out front too, due to being 'vertically challenged' like Grant :o

I really like it.

It does everything I need. I get my light at 6 0-clock like I want and a vert grip all in one relatively cheap package. Plus the 6P makes an excellent weapons light in the first place.

BravoCompanyUSA

07-13-06, 13:30

I really like it.

It does everything I need. I get my light at 6 0-clock like I want and a vert grip all in one relatively cheap package. Plus the 6P makes an excellent weapons light in the first place.

That thing is pretty cool.
What parts did you use to fab' it?

JLM

07-13-06, 13:33

Can't really see, shock isolated bezel?

VA_Dinger

07-13-06, 13:37

Can't really see, shock isolated bezel?

No not yet, I still need to buy one.

I will get you a parts list tonight, but I just followed BL's advice and the LF "How To" thread that ChistianR (I think) posted.

clynch

07-14-06, 20:24

My humble submission:

http://img.photobucket.com/albums/v711/clintl/SBR-W-HK.jpg

Stay safe all,
Clint

tctlrld

07-14-06, 20:44

Here's mine with a couple of different uppers:

http://img.photobucket.com/albums/v424/giffmann/shorty012.jpg

Giff, what kind of plate carrier is that?

GIFFMANN

07-14-06, 21:22

My humble submission:

http://img.photobucket.com/albums/v711/clintl/SBR-W-HK.jpg

Stay safe all,
Clint

Clint,
Looks like you finally scored some of those sights....or did you break down and make them yourself?
And no matter what you say, that is a FINE looking SBR!

GIFFMANN

07-14-06, 21:23

Giff, what kind of plate carrier is that?

That is from a run of Maritime CIRAS vests from Eagle that I had made up in the MultiCam pattern.

VA_Dinger

07-14-06, 22:39

That thing is pretty cool.
What parts did you use to fab' it?

I just build mine using the "How To" thread posted by Christian R on the Lightfighter forum. He used the thread posted by Basicload as a guide and worked out the details for everybody else to follow. It was very easy and only took about a half hour.

Christian R's photo: (I do not have a detailed photo of mine) - Plus his looks better

http://img.photobucket.com/albums/v74/va_dinger/VFG005.jpg

"Gangster Grip" Vertical Foregrip Lights

http://lightfighter.net/eve/forums/a/tpc/f/9046084761/m/3471091951/r/4181032061#4181032061

I had an old 6P that was not being used so it just made sense. It also solved a problem for me. I had just come back from a LAV class were he teaches to grip the weapon out farther on the hand guards for better recoil control. Larry actually reaches out far enough to grip the bayonet lug at times. I tried this technique and as you might expect it works. :D

My only problem was mounting a white light without using a tape switch (I dislike them). The "Gangsta Grip" solved the problem perfectly and also allowed me to have a vert grip. The only thing I did different was some additional re-contouring of the A2 grip to get rid of the hump. I also added a piece of inter-tube to hide it. It was damn ugly after the re-contour job.

Raith

07-15-06, 13:08

My only problem was mounting a white light without using a tape switch (I dislike them). The "Gangsta Grip" solved the problem perfectly and also allowed me to have a vert grip.

That was exactly what I think most people who've bought them or made them have wanted. A way to incorporate a vertical foregrip with a light using no tape switch.

The design tends to lend itself very well to being put out as far as possible on a carbine length rail. It can still be used on a longer rail, but at certain positions, the shadow cast by the rail into the light can be very large.

The only thing I did different was some additional re-contouring of the A2 grip to get rid of the hump. I also added a piece of inter-tube to hide it. It was damn ugly after the re-contour job.

I've recently made one like this for a friend-

http://i44.photobucket.com/albums/f36/castle-bravo/gangstergrips/02-6pa2z32.jpg

And it reminded me that I very much dislike using an A2 grip for this project and leaving it alone. With the way that I position my hand on the grip, each of the "bumps" was under a knuckle and it was quite uncomfortable to hold it for a few moments, much less shoot with it.

Another one that I made -

http://i44.photobucket.com/albums/f36/castle-bravo/gangstergrips/01-6pa2smoothf26.jpg

I much prefer this setup to the one above. It takes a bit more work, but the results are quite good, I think.

Another change since that original picture was having the thumbscrew on the left side of the mount. It provides a nice little area to position your thumb if you shoot thumbs forward like that.

ChristianR/CyclicD is at Ft Hood right now and doesn't have too much spare time, so I've taken over Gangster Grip production with his blessing.

If anyone needs any help assembling one or has any questions about them, please let me know.

VA_Dinger

07-15-06, 17:56

Raith

07-16-06, 02:41

Raith, thanks for the update and pictures.

The only thing I do differently is to turn the 6P so that the flats are on the top & bottom. This allows the grip mounting screw to go up through the drilled/tapped Aimpoint mount & spacer. It now bottoms out on a flat surface. I never had a problem with the 6P rotating, but this would certainly prevent it from ever being a problem.

The only thing I would still like to do is tone down the sharp edges of the Aimpoint mount with some sandpaper and a file. It can be irritating if used all day as is.

I don't want to stray too far off topic, but thats an interesting point I hadn't ever thought of. I think my (and Christian's) rationale with the flats on the sides was so that the most amount of contact in the direction that the ring was pulling together was on the non flat part of the light. That may be unfounded, though. Likely the Surefire flashlight body is the strongest part of the whole equation.

I'd like to find a suitable 8/10" ring and build one using Grant's WG weaponlights. I think that'd be cool.

MadDog

08-08-06, 11:58

Here are a couple pics of my 7.5" that I use as a range plinker and for 3-gun tac matches if the course is set up with a lot of CQB stages. I just took the Aimpoint and Troy BUIS off and put them on my XCR. I have a LaRue Iron Dot on order for the SBR.

MadDog :p

http://img.photobucket.com/albums/v217/MadDogDan/MagpulCRT011.jpg

http://img.photobucket.com/albums/v217/MadDogDan/MagpulCRT004.jpg

http://img.photobucket.com/albums/v217/MadDogDan/MagpulCRT008.jpg

eklikewhoa

08-10-06, 08:09

my sbr patiently waiting for the can.....

http://img.photobucket.com/albums/v337/cfeklikewhoa/sbr/IMG_1209.jpg

11.5" bushmaster 1x7
bushmaster lower reciever and lpk
cmt upper reciever and m16bcg
larue 7.0 w/ kac panels
surefire m900 w/larue mount
mgi rrbuffer and d-fender
magpul m93b
trijicon ta31a larue tacitcal mount
troy buis
AAC sopmod flash hider/mount
awaiting AAC m4-2000

81LC

08-10-06, 18:40

A little toy we put together for testing. The infamous Kevin B had a hand in its creation so you can imagine how well it went not to mention just how nasty it was to shoot. :D

http://www.canadiantactical.ca/Images/R12CAR.jpg

bigbore

08-10-06, 21:34

my sbr patiently waiting for the can.....
awaiting AAC m4-2000

Why did you order the full size M4-2K instead of the compact SCAR-SD?

eklikewhoa

08-13-06, 05:26

Why did you order the full size M4-2K instead of the compact SCAR-SD?

i have other rifles in which the can will be mounted to and the weight/length is not a problem for me since i dont kick doors for a living.

eklikewhoa

08-13-06, 05:29

http://img.photobucket.com/albums/v337/cfeklikewhoa/sbr/IMG_1225.jpg

themadhatter

08-18-06, 05:22

http://img.photobucket.com/albums/v474/themadhatter-1/mfal.jpg http://img.photobucket.com/albums/v474/themadhatter-1/MVC-121S.jpg can i play;)

DBautista

08-18-06, 17:02

SWEET KRINKS.

Especially the Blonde!

Impact

08-18-06, 23:00

Colt_SBR

08-20-06, 03:25

Just arrived. Been lurking for a few weeks. I like the looks of your site.

Thought I'd post an old photo of my SBR.

http://onfinite.com/libraries/81704/6a7.jpg

http://onfinite.com/libraries/81702/6a7.jpg

Boom

08-25-06, 22:19

shark31

08-28-06, 17:43

http://img54.imageshack.us/img54/8121/dsc00058hv5.jpg (http://imageshack.us)

http://img201.imageshack.us/img201/9486/dsc00063ii9.jpg (http://imageshack.us)

Noveske 6.8 10.5" :D

QuietShootr

08-30-06, 19:50

LMT 10.5" Mk18 upper on Colt lower - all Colt internals

http://sniper.rsvs.net/SBRSmall.JPG

Redfisher

09-02-06, 11:09

Colt with LMT 10.5 upper

http://img.photobucket.com/albums/v400/redfisher19/Redfisher3/Colt.jpg

Colt_SBR

09-05-06, 23:08

I like simple. Did you have the barrel cut down or is that a factory 11.5?

It's a factory Colt Commando upper. It's marked with a 4 on the front of the carry handle and has M4 feed ramps. It came with a M4 full auto bolt carrier and extractor. I got it from my brother's M16.

http://onfinite.com/libraries/253029/a60.jpg

BigCraig

09-12-06, 16:58

Here is mine. Paul at Bravo Company built this for me. I added the KX3, and it will soon have a M4-2000.

http://www.hunt101.com/img/426679.jpg

Hardgear, LLC

09-12-06, 21:13

A couple of mine:

http://www.darlynn.com/albums/Shooting/krink3.sized.jpg

http://www.darlynn.com/albums/GunPr0n/m4_2000_009.sized.jpg

http://www.darlynn.com/albums/album25/9mmsd_004.sized.jpg

http://www.darlynn.com/albums/UMP-Pictures/Halloween_HK.sized.jpg

Bomber

rob_s

09-22-06, 12:21

My new toy. Should be changing pretty drastically over the next week or so. Have the DD 9.5 FSP, a vltor stock, and a few other goodies on the way.
http://img97.imageshack.us/img97/3224/6933starbordyy1.jpg

Mongo

09-25-06, 16:35

Here's mine, really a MG but its got a short barrela and is a rifle so its a SBR with a selector.;)

http://home.houston.rr.com/stoner63a/temp/stonercrb2.jpg

http://home.houston.rr.com/stoner63a/temp/stonercrb4.jpg

edwin907

09-26-06, 12:29

http://i192.photobucket.com/albums/z238/edwin907/SBR.jpg

Not full auto (yet!), but here's the little LMT MRP SBR I'm very pleased with.

Stephen_H

09-26-06, 13:15

Here's my LWRC 6.8mm SPC 10.3" SBR. I just got the tax stamp yesterday.

http://img.photobucket.com/albums/v342/stephen_101st/Gear/lw-6.jpg

http://img.photobucket.com/albums/v342/stephen_101st/Gear/lw-5.jpg

Stephen_H

09-26-06, 13:17

http://www.pbase.com/edwin907/image/67310697/original.jpg

Not full auto (yet!), but here's the little LMT MRP SBR I'm very pleased with.

I like the way you set up your Aimpoint and 3X. That looks really slick.

Stephen

edwin907

09-26-06, 14:22

I like the way you set up your Aimpoint and 3X. That looks really slick.

Stephen

Your 6.8 SBR looks terrific.

I was going to go with the LaRue Tactical 3X magnifier mount like you have (love the way you reversed it to accomodate the flip cover, thought I was the only one who thought of that), but two things.
First it is on a MRP so no worries about rail estate and room for a BUIS, especially as I like a nose to charging handle cheekweld even with magnified optics.
Second, I ditched the Aimpoint flip up caps a while back (they're a pain in the rear, a spare TA11 scopecoat protects both when in the case), and run a Killflash ARD in the front (not really bad once you train with it a little bit).
The Aimpoint rubber eye cup actually works good mounted between the M3 and 3X, sort of gives a "seal" between the two which has survived my testing with heavy rain as well as direct heavy spray with a garden hose (not planning on going diving!).
I have actually had the Aimpoint flip up caps give me more trouble in the rain, it seems opening and closing them (or their just being there splashing raindrops) puts more water on the sight's lenses than if you just don't mount them at all.
The Killflash is a mixed blessing, keeps the water out unless it's blowing then it keeps it in.

Outsideventman

09-30-06, 08:22

http://img171.imageshack.us/img171/1529/newcabinets006cw2.jpg (http://imageshack.us)

Robb Jensen

10-01-06, 11:10

Here's my 3rd and newest SBR AR.

http://img.photobucket.com/albums/v408/gotm4/gunpics/21.jpg

themadhatter

10-01-06, 16:06

http://img.photobucket.com/albums/v474/themadhatter-1/MVC-334S.jpg
http://img.photobucket.com/albums/v474/themadhatter-1/MVC-354S.jpg

shark31

10-02-06, 09:35

Made a couple of changes to the 6.8 10.5 noveske:
http://img207.imageshack.us/img207/2016/27319550323lr4.jpg (http://imageshack.us)

bmwguy

10-04-06, 09:52

Here's mine:

http://members.cox.net/john.hsu/ar15sbr.JPG

2 more(these are actually my Krinks):

http://www.salboarms.com/images/BulgySBR.jpg

http://www.salboarms.com/images/YugoSBR2.jpg

edwin907

10-13-06, 14:42

Specwar 2 at last.

I also went back to my old setup with the Aimpoint (even put the flip ups back on it), seems I am more comfortable with it a little farther forward like in this photo.

http://www.pbase.com/edwin907/image/68496127/original.jpg

Bryson

10-14-06, 14:09

What suppressor and barrel length? That looks really really hot.

edwin907

10-14-06, 18:58

What suppressor and barrel length? That looks really really hot.

It's a 10.5" LMT MRP barrel, and a SWR Specwar 2 suppressor.

Here's my other SBR, a 14.5" Afgan with non-permanent phantom style Bilock, the same Specwar 2 suppressor, LT 13.2 rail, Troy flip up sights, TA31F ACOG in LT mount, VLTOR stock, RRA lower, KAC rail covers & TD grip, and various other parts.

Grant should recognize this one, almost all of it came from him!

http://www.pbase.com/edwin907/image/68496128/original.jpg

edwin907

10-29-06, 00:15

And here's another pic of the 10.5" MRP, nightfighter style with PVS-14, & IWAL 2.

Something about this pic turned out really pleasing to me.

http://i192.photobucket.com/albums/z238/edwin907/SBRNF.jpg

Stephen_H

11-04-06, 12:45

I recently updated and SBRed my Bushmaster M4. It has given me 7 years of faithful service, but was in need of a new barrel and an overall update. The last barrel had many cases of ammo through it (I stopped counting at 15,000 rounds). I decided that in addition to rebarreling I would also SBR it. Some of the new features include:

-Noveske 10.5" chrome-lined Stainless barrel
-Daniel Defense 9.0 Lite Rail (Thanks Jay and Marty!)
-Larue LT-150 Aimpoint mount (Thanks Monty and Larue Tactical!)
-Magpul CRT Carbine stock
-LMT fixed front BUIS
-Troy folding rear BUIS
-Surefire X200 (still waiting on the XT-07 tailcap for this one)

So, like a phoenix rising from Arizona she went from this:
http://img.photobucket.com/albums/v342/stephen_101st/Gear/MulticamM4.jpg

...to this:
http://img.photobucket.com/albums/v342/stephen_101st/Gear/Bushmasterreborn.jpg

Impact

11-05-06, 13:49

nice camo job. Bowflage ?

Stephen_H

11-06-06, 08:21

nice camo job. Bowflage ?

Yes. I just found out that HS Camo discontinued the removeable bowflage line. I guess I'll have to switch to model paints to get the good camo colors that I want.

Stephen

Daniel-Mark

11-13-06, 05:52

Some of the new features include:

-Noveske 10.5" chrome-lined Stainless barrel
-Daniel Defense 9.0 Lite Rail (Thanks Jay and Marty!)
-Larue LT-150 Aimpoint mount (Thanks Monty and Larue Tactical!)
-Magpul CRT Carbine stock
-LMT fixed front BUIS
-Troy folding rear BUIS
-Surefire X200 (still waiting on the XT-07 tailcap for this one)

Stephen, what type of gas-block do you use under the DD lite rail?

Thanks,
Daniel

Stephen_H

11-13-06, 06:23

Stephen, what type of gas-block do you use under the DD lite rail?

Thanks,
Daniel

It's an VLTOR and yes it is tricky with the DD Lite Rail. Fortunately, the Noveske barrel was properly dimpled for the gas black set screw. That made the job considerably easier.

Stephen

SOPMOOD

11-14-06, 22:09

http://img.photobucket.com/albums/v424/giffmann/shorty010.jpg

I love this upper config, can you give me details on it?

Rogue7a

11-25-06, 20:24

This is my PSD kit

http://www.snipersarmory.com/images/MK18MOD1small.JPG

Voodoochild

11-25-06, 22:05

Nice rig Rouge but I don't know about that SIR I am not a big fan of them. I had one but got rid of it.

Rogue7a

11-25-06, 23:47

Nice rig Rouge but I don't know about that SIR I am not a big fan of them. I had one but got rid of it.

Well I couldn't beat the price...... Free

The truth is it started out as a serialized CQBR I picked up from the REF at Khandahar. Then the barrel along with the KAC can went south. I then got a colt 11.5 and came across the ARMS rig which it sits in now. As far as operative wise it has worked flawlessly. Although it is a bit heavy when i put the PEQ-2 on it. The current can works GREAT and has never given me a problem.

As you'll notice, my gear....... It is dirty

Sorry Kevin but I could not resist

KevinB

11-26-06, 17:59

http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/KevwLMT.jpg

http://img.photobucket.com/albums/v193/EvilKev/Afghan%20Take%20II/Afghan-Embassy038.jpg

JeepDriver

11-26-06, 18:12

http://www.fototime.com/3CD8F7D6925F034/standard.jpg

underdog75

12-09-06, 22:45

11.5"SBR,14.5"SBR.14"SBS
http://users.adelphia.net/~masine/HH7.jpg

Robb Jensen

12-15-06, 05:34

My recently shortened LMT. Was 14.5" now 10.3"

http://img.photobucket.com/albums/v408/gotm4/gunpics/newpics002.jpg

Here's 9x19s (my wife) SBR.

http://img.photobucket.com/albums/v408/gotm4/gunpics/9x19sbr.jpg

buddyhoohaw

01-09-07, 13:46

10.5" Noveske

http://i5.photobucket.com/albums/y198/buddyhoohaw/SBR/N4-7.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/SBR/N4-9.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/SBR/SBR01.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/SBR/N4-22.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/SBR/N4-14.jpg

altav

01-11-07, 11:16

http://www.mobilemediacorp.com/ar15/9mmurx_1.jpg

Zak Smith

01-11-07, 13:11

12.0

http://demigod.org/~zak/DigiCam/Noveske12/smaller/B100_2201_img.jpg (http://demigod.org/~zak/DigiCam/Noveske12/?small=B100_2201_img.jpg) [ link to LARGER image ] (http://demigod.org/~zak/DigiCam/Noveske12/?small=B100_2201_img.jpg)

w/ HALO
http://demigod.org/~zak/DigiCam/Noveske12/smaller/B100_2188_img.jpg (http://demigod.org/~zak/DigiCam/Noveske12/?small=B100_2188_img.jpg) [ link to LARGER image ] (http://demigod.org/~zak/DigiCam/Noveske12/?small=B100_2188_img.jpg)

MadDog

01-18-07, 19:52

Just got my LaRue Iron Dot sighted in on my 7.5" Diplomat. This little puppy handles and balances much better with the Iron Dot instead of the Comp M3 I had on it.

MadDog :p

http://img.photobucket.com/albums/v217/MadDogDan/LTIronDot001.jpg

http://img.photobucket.com/albums/v217/MadDogDan/LTIronDot012.jpg

Impact

01-21-07, 16:28

very nice

Stephen_H

01-23-07, 14:04

...and now with the added reliability of a LWRC Piston system.

http://img.photobucket.com/albums/v342/stephen_101st/Gear/Bushmasterreborn-3.jpg

buddyhoohaw

01-23-07, 15:35

...and now with the added reliability of a LWRC Piston system.

http://img.photobucket.com/albums/v342/stephen_101st/Gear/Bushmasterreborn-3.jpg

Very nice....

docsprague

02-19-07, 11:21

Here is my SBR, All LMT of course.
http://i78.photobucket.com/albums/j100/docsprague/HPIM0415.jpg

WILDBILL

02-22-07, 08:07

Please will someone post real or clone MK18 MOD0? Beacuse I plan on building a MK18 MOD0 clone. Please post some Pic's of SBR from the SandBox?

Cooler

03-04-07, 22:24

http://img.photobucket.com/albums/v202/rbandro68/4%20sale/DSCN1280.jpg
http://img.photobucket.com/albums/v202/rbandro68/4%20sale/DSCN1281.jpg

davidp14

03-06-07, 06:40

http://img139.imageshack.us/img139/5316/picture1602eg7.jpg

Robb Jensen

03-06-07, 07:06

Please will someone post real or clone MK18 MOD0? Beacuse I plan on building a MK18 MOD0 clone. Please post some Pic's of SBR from the SandBox?

Here's my Mk18'ish 10.3" LMT SBR. I didn't build to be like the Mk18 but I do like the 10.3" length.

Latest pic.
http://img.photobucket.com/albums/v408/gotm4/gunpics/newpics002.jpg

This is before I changed out lights and stocks.
http://img.photobucket.com/albums/v408/gotm4/10-8.jpg
http://img.photobucket.com/albums/v408/gotm4/10-2.jpg

KevinB

03-06-07, 12:09

Robb - sweet blaster

My recent SBR build

http://img.photobucket.com/albums/v193/EvilKev/Weapons/Mk18005.jpg

http://img.photobucket.com/albums/v193/EvilKev/Weapons/Mk18006.jpg

Took the Short Dot off and put the Aimpoint M3 back on.
http://img.photobucket.com/albums/v193/EvilKev/Weapons/Colt007.jpg

Short Dot #3 when back on the Colt AR15A3 SBR
http://img.photobucket.com/albums/v193/EvilKev/Weapons/Colt008.jpg

Jon G23

03-15-07, 16:04

What sling is that and how does it attach?? Looks interesting.

Here's my Mk18'ish 10.3" LMT SBR. I didn't build to be like the Mk18 but I do like the 10.3" length.

Latest pic.
http://img.photobucket.com/albums/v408/gotm4/gunpics/newpics002.jpg

This is before I changed out lights and stocks.
http://img.photobucket.com/albums/v408/gotm4/10-8.jpg
http://img.photobucket.com/albums/v408/gotm4/10-2.jpg

S-1

03-20-07, 13:07

Here's mine.

http://img251.imageshack.us/img251/9422/lmt1051ge7.jpg

http://img64.imageshack.us/img64/8492/lmt1052fb9.jpg

molsen

03-20-07, 16:01

http://i153.photobucket.com/albums/s206/molsen2295/SBR2.jpg

KevinB

03-20-07, 23:29

Mike -- what do you think of the light?
I've been trying to lighten some of mine - the 9V SF's are a bit too much on a small gun.

K.L. Davis

03-20-07, 23:42

http://img387.imageshack.us/img387/4043/runt2xa1.png

molsen

03-21-07, 00:55

Mike -- what do you think of the light?
I've been trying to lighten some of mine - the 9V SF's are a bit too much on a small gun.
All I have to say is when I have to buy another Surefire for a rifle, it's going to be a Scout. I've never owned a SF 9V, so it's kinda hard for me to compare a Scout to one, but I can't tell a major difference in performance between the Scout and a regular 6V or my 951. The difference in weight is very noticable though. It's almost like night and day. USMC03 is the one that pointed me (as usual) in the direction of the Scout. He replaced a few SF 9Vs for Scouts because the 9Vs were too much extra weight for not that much more added benefit.

S-1

03-21-07, 23:25

Molsen, do you know if Surefire makes a "C" tailcap for the Scout?

molsen

03-22-07, 00:41

Molsen, do you know if Surefire makes a "C" tailcap for the Scout?

If by "C" you mean "clickie" as in click-on and click-off, then yes, they do. In fact, mine came with both the "C" and the tape switch.

koalorka

03-22-07, 13:51

If by "C" you mean "clickie" as in click-on and click-off, then yes, they do. In fact, mine came with both the "C" and the tape switch.

It's called the SW02 tailcap an it's no longer produced by SureFire, get yours while they're still around.

2IDdoc

03-25-07, 15:06

MadDog,

what else can you tell us about that Iron Dot? Does it have any issues that you have seen, like washing out in bright light, or when aiming from a dark area to a bright area? Those were the things that turned me off from the Reflex. I want a light CQB dot for my 11.5" BCM that will be ready to go when I grab it.

Oh, by the way, is MadDog in any way a reference to Jerry "MadDog" Shriver?

SuicideHz

03-25-07, 16:43

http://img387.imageshack.us/img387/4043/runt2xa1.png

Huh??

:confused:

adh

03-30-07, 15:46

Huh??

:confused:

photoshopped - unless the person welding the cut off FSB to the Noveske FH is just a master and makes the cleanest welds I've ever seen

BB493

03-30-07, 23:36

Here's my contribution.

http://i8.photobucket.com/albums/a20/BB493/Rifle1.jpg

http://i8.photobucket.com/albums/a20/BB493/Rifle2.jpg

CarlosDJackal

03-31-07, 08:15

Here's mine. It has an LMT 10.5" upper and BCG topped off with an Aimpoint ML3 and 3x Magnifier on a Samson flip-mount. It also has a grippod (which I wish was a little shorter), CAA M-33 2-rail handguard and Noveske KX3 muzzle device. The lower is an RRA with various internals (combination RRA, Bushy, and what else I had lying around). Magpul CTR stock, CQB Solutions (now Specter) HST sling which I have rigged to be detachable and convertible to a 2-point.

This is in an i-Shot 30-inch case which is what protects it the trunk of my car.
http://i176.photobucket.com/albums/w169/CarlosDJackal/MySBRini-ShotCase.jpg

This is currently my SHTF rifle so it shares the trunk with my SHTF vest (TAG plate carrier) and helmet (surplus kevlar).
http://i176.photobucket.com/albums/w169/CarlosDJackal/TacticalVest02a.jpg

shark31

04-03-07, 08:09

http://i92.photobucket.com/albums/l2/shark3-1/Picture002-1.jpg
http://i92.photobucket.com/albums/l2/shark3-1/Picture001-1.jpg

RWBlue

04-03-07, 09:26

131Gee, mine looks different from everyone elses. Lets see if my attachment works.

davidp14

04-03-07, 11:38

http://img408.imageshack.us/img408/3681/picture1662xs0.jpg (http://imageshack.us)

GOTM4 on my RR M16 with his ARES piston converted upper. It makes a huge difference in F/A. Its LOUD with that brake but easily controlled and a very slow ROF.

Robb Jensen

04-03-07, 11:42

Here's some more David! That AKConcepts DNTC combined with the ARES and an H buffer is the shiznit! :)

http://img.photobucket.com/albums/v408/gotm4/gunpics/daveM16ARES2.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/daveM16ARES.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/robbM164.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/robbM165.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/TimM16.jpg

davidp14

04-03-07, 12:25

Here's some more David! That AKConcepts DNTC combined with the ARES and an H buffer is the shiznit! :)
.....

GIT SOME!! LOL!:D

SuicideHz

04-03-07, 22:03

Damn and I thought ARES only produced vaporware!

buddyhoohaw

04-09-07, 18:11

I just recently added the CTR stock.

http://i5.photobucket.com/albums/y198/buddyhoohaw/SBR/N4-32.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/SBR/N4-31.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/SBR/N4-30.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/SBR/N4-28.jpg

Stephen_H

04-13-07, 08:33

I just recently added the CTR stock.

Nice! Where are the Krink pics?;)

Stephen

buddyhoohaw

04-13-07, 09:29

Nice! Where are the Krink pics?;)

Stephen

Here she is.... Yugo M-92 on NDS-92. Build by EastBloc Imports.

http://i5.photobucket.com/albums/y198/buddyhoohaw/M92-1.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/M92-5.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/M92-4.jpg

vinesr6

04-18-07, 18:36

http://i54.photobucket.com/albums/g99/vinesr6/Picture753.jpg

hetfield

04-19-07, 14:00

vinesr -

what kind of can and barrel is that? I like it!

SuicideHz

04-19-07, 18:55

It's a 9mm rifle- I can just barely make out the logo. I *think* its' the specwar logo. If it's not, it's because I just don't know the logos too well. It's definitely not YHM or AAC or Gemtech.

shark31

04-19-07, 23:24

SWR Trident 9

SuicideHz

04-20-07, 19:52

cool!

:D

I guess I do know the logos well enough!

hetfield

04-20-07, 22:03

http://img340.imageshack.us/img340/5923/122ye7.jpg

buddyhoohaw

04-22-07, 22:18

A few more of the krink....

http://i5.photobucket.com/albums/y198/buddyhoohaw/Krink/M92-7.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/Krink/M92-8.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/Krink/M92-13.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/Krink/M92-11.jpg

http://i5.photobucket.com/albums/y198/buddyhoohaw/Krink/M92-12.jpg

Stephen_H

04-23-07, 07:46

A few more of the krink....

She runs as good as she looks too. Thanks for letting me put my paws on her yesterday.

Stephen

buddyhoohaw

04-23-07, 08:35

She runs as good as she looks too. Thanks for letting me put my paws on her yesterday.

Stephen

Anytime bro :D

http://i5.photobucket.com/albums/y198/buddyhoohaw/Krink/M92-14.jpg

Steve-HSA

04-29-07, 08:48

Technically an SBR, just not an M4 ;)
http://img442.imageshack.us/img442/6694/53a3ro2.jpg

gunny

05-06-07, 11:50

http://i199.photobucket.com/albums/aa270/force8654/DSC01221_edited.jpg
http://i199.photobucket.com/albums/aa270/force8654/DSC01219_edited.jpg

SuicideHz

05-06-07, 15:18

I've finally taken pics:

http://www.zoto.com/suicidehz/img/51/159d607da2a40c2ec313049687436729.jpg

If that's not short enough:

http://www.zoto.com/suicidehz/img/51/4c0fd069c93f0efdfcf73036dc9e95df.jpg

ETA: Noveske lower, Colt RO635 upper, ASA mag adapter (I believe) and Uzi mags- one converted 25rd and 3 brand new in package ASA 32 round IMI mags that need to be converted. I ramped the rear of the bolt myself and it works just fine with my RRA NM 2-stage.

I have a slight ejection problem though. They get caught halfway in/out of the port causing cases to crimp at the mouth. I load my own SS 147gr. Rainiers with about .4cc Acc#5.

BigCraig

05-06-07, 16:47

I changed mine around a bit.

http://www.hunt101.com/img/481771.jpg

Also not in picture is the new LaRue flip mount with Heinsoldt magnifier.

eta: My 9mm suppressed SBR.

http://www.hunt101.com/img/463843.jpg

edwin907

05-06-07, 21:04

M92 Yugo

http://i192.photobucket.com/albums/z238/edwin907/M92a.jpg

Pinco Palla

05-07-07, 06:46

http://img.villagephotos.com/p/2003-11/489586/SBRinaction.jpg

http://img.villagephotos.com/p/2003-11/489586/SBRinaction,2.jpg

A couple of our SBRs .

PP out

KevinB

05-07-07, 08:11

http://img.photobucket.com/albums/v193/EvilKev/Weapons/Iraq559.jpg

http://img.photobucket.com/albums/v193/EvilKev/Weapons/Iraq560.jpg

Its not mine (hence the ARMS M68...) - I have not gotten all around to Larue yet...

and
I'll dig out the ChopMod RPD later...

Robb Jensen

05-07-07, 09:59

http://img.photobucket.com/albums/v193/EvilKev/Weapons/Iraq560.jpg

Its not mine (hence the ARMS M68...) - I have not gotten all around to Larue yet...

and
I'll dig out the ChopMod RPD later...

Very cool. Themadhatter (member here) has a 11" FAL (registered SBR) semi-auto with a Noveske KX3 on it. It's amazing how little recoil it has.

nationwide

05-07-07, 13:07

Here's mine with my buddy's HALO on it.

http://img.photobucket.com/albums/v603/nationwide/sbr_desktopSmall.jpg

SuicideHz

05-07-07, 18:41

That backdrop worked out very well actually!

Code3Patriot

05-13-07, 17:02

My humble submission:
http://i172.photobucket.com/albums/w40/BadBoyACSO/6-2.jpg

Noveske 10.5'' 6.8 barrel on Stag 6.8 marked lower.
The upper was purchased from Shark31 and I added the KX3 to it.

KevinB

05-15-07, 04:47

http://img.photobucket.com/albums/v193/EvilKev/Weapons/M4Drills006.jpg

and a little Russian

http://img.photobucket.com/albums/v193/EvilKev/Weapons/Iraq564.jpg

http://img.photobucket.com/albums/v193/EvilKev/Weapons/Iraq563.jpg

The agreement is that it needs a vert grip and an EOTECH

ChrisG19

05-15-07, 09:01

LMT 10.5 with Aimpoint ML2 in a LaRue mount.

http://i558.photobucket.com/albums/ss26/ChrisG19/Lisas.jpg

RHR

05-19-07, 18:51

LMT lower with 10.5" LMT upper.

http://img407.imageshack.us/img407/707/dscn12830028qc2.jpg

SWATcopUSA

05-20-07, 05:03

Newest edition to the family:

LMT Defender 2000 w/ 14.5 M4 Upper
http://i67.photobucket.com/albums/h312/JgladWPD/DSC00991.jpg

This is the rig I'm running for SRT right now (minus my SureFire 900 VFG weapon light. I actually broke one!! But I have a new one on the way from SF. All I can say is excellent CS)

Already 1000 through it and it runs like a scalded dog. Just thought I would add my humble submission due to this being my first SBR.

Stay safe and watch your six

lsujim

05-21-07, 04:04

http://i200.photobucket.com/albums/aa107/lsujim/IMG_0052.jpg

LMT 10.5 with AAC Omni Suppressor

Gump

05-21-07, 21:55

My son shooting my 11.5 inch SBR
http://i129.photobucket.com/albums/p207/Gunp/DSCF3000.jpg

SuicideHz

05-21-07, 22:12

Retracted.

-with apologies.

Bolt_Overide

05-22-07, 02:03

Is he part chicken?

Moved up from insulting posters to insulting their children eh? weak...

KevinB

05-22-07, 14:17

Joseph -- let this constitute your last warning about personal attacks.

Voodoochild

05-22-07, 17:03

M92 Yugo

http://www.pbase.com/edwin907/image/78339868/original.jpg

Damn nice Krink Edwin and how the hell do you all take such good pics? Mine always suck!!!

edwin907

05-22-07, 18:33

Damn nice Krink Edwin and how the hell do you all take such good pics? Mine always suck!!!

It's all in the lighting.
The above photo was a quick snapshot taken with a Canon G7 and a 430EX flash, bounced off the ceiling at an angle. Direct flash almost always sucks.

The Krink shoots great, here is a 50 yard rapid fire group, prone, the rifle is zeroed at about 28-29 yards, and I expected a little more rise than I got, but the results were excellent anyway.
Certainly not my best group ever, but very effective for a weapon being fired at roughly 1 round per second or faster.
I'm going to somehow put a micro Aimpoint on it, maybe weld a piece of rail in front of the rear sight.

http://i192.photobucket.com/albums/z238/edwin907/KrTarget.jpg

Voodoochild

05-22-07, 18:44

"It's all in the lighting. The above photo was a quick snapshot taken with a Canon G7 and a 430EX flash, bounced off the ceiling at an angle."

Dude you lost me there..Sounds like I need to take more pictures outside in natural lighting.

SuicideHz

05-22-07, 18:53

Jesus. It wasn't a personal attack- I was commenting on the position of his elbow.

I'm sorry if it was taken as an insult or to mean anything about him personally (like the normal instance of calling someone "a chicken.")

I did not mean to say he was chicken.

SuicideHz

05-22-07, 18:56

ChrisG19

05-22-07, 19:37

Dude you lost me there..Sounds like I need to take more pictures outside in natural lighting.

Try outside during overcast conditions, you should get pretty good results. Another trick with point-and-shoot cameras is to put some tissue paper in front of the flash to soften the light.

Bolt_Overide

05-22-07, 20:54

ETA: Bolt_Override- what and who are you referring to?

Sorry, that was supposed to be an Edit not Quote.

I was referring to you, and the comment about being part chicken. Given the nature of your contributions here, I doubt anyone would fault me for the conclusion I drew. I am guilty of my fair share of internet pissing contests, but I dont generally enjoy them, you seem to.

I suggest we let the matter drop, discussing it further in a public forum serves no purpose other than to get into another pissing match.

SuicideHz

05-22-07, 21:03

Thanks for the kind comments.

GunLovinTexan

05-23-07, 16:51

http://i30.photobucket.com/albums/c348/Bizkets/NEwpics23073.jpg

Ok not really but yes i did buy another POF upper and here it is on my Colt M4LE lower....

Rob

shark31

05-23-07, 19:21

5.56/6.8 suppressed AR
http://i92.photobucket.com/albums/l2/shark3-1/416sd004.jpg

Jon G23

05-23-07, 19:25

The lower is RRA assembled by me. The upper was put together by Grant and has the following components:

Larue Stealth M4 Upper
Larue 11" SBRS "Gooseneck" Rail
Noveske 10.5" SS bbl
Noveske KX3 Flash Hider
LMT Charging Handle
LMT Full Auto BCG
Larue Gas Block
TD Vert Grip (Shorty)
Surefire E2D with Vltor Mount
PMAGS
Troy Folding Backup Sights.

http://i178.photobucket.com/albums/w248/MNJon/GunStuff/Mine1.jpg

Code3Patriot

05-28-07, 11:24

Jon G23 - Great build! That is almost identical to what I want my next project to be. Thanks for the pic.

SuicideHz

05-28-07, 11:27

JohnG23- are those the new Troy M4 style sights?

SuicideHz

05-28-07, 17:24

http://www.zoto.com/suicidehz/img/800x600/3aa0291aa957c53ec3d2b41e770e4224.jpg

Noveske lower
BCM 11.5" upper
shaved gas block
DD 10.0 M4 handguards
Eotech 512
G5 Vortex- should I put the A2 back on?

shark31

05-30-07, 08:53

My humble submission:
http://i172.photobucket.com/albums/w40/BadBoyACSO/6-2.jpg

Noveske 10.5'' 6.8 barrel on Stag 6.8 marked lower.
The upper was purchased from Shark31 and I added the KX3 to it.

How is it doing? I like the new all black look! She needed a new paint job anyway.

Jon G23

05-30-07, 15:40

Jon G23 - Great build! That is almost identical to what I want my next project to be. Thanks for the pic.

Thanks! I will finally get to shoot it this weekend! Can't wait!!

Jon G23

05-30-07, 15:41

JohnG23- are those the new Troy M4 style sights?

YES and I really like the sight picture.... haven't shot it, but played with it alot and it seems great!

utarch00

05-30-07, 15:50

SuicideHz

05-30-07, 19:21

Yes, what bag?

G23- I think I'll eventually break down and buy a set. I'm currently using a FSB and KAC300m rear that I got for $65 so $250 is a lot to swallow...

Jon G23

05-30-07, 19:50

Jon

What bag is this? You setup is going to be similar to they way I want mine to end looking like and I need to get a bag.

That's an i-shot S.E.R.T. 30" case. It is a really high quality case. The best I have ever had (or seen!).

Not cheap at $130 or so.... but worth it.

CarlosDJackal

05-31-07, 22:58

http://i30.photobucket.com/albums/c348/Bizkets/NEwpics23073.jpg

Ok not really but yes i did buy another POF upper and here it is on my Colt M4LE lower....

Rob

Is it me or are both of those sights installed backwards? :confused:

SuicideHz

05-31-07, 23:18

No, I saw it too. He's had plenty of time to flip them and take a new picture to swap in before you saw them. He hasn't.

Rob is slacking...

;)

tiger seven

06-02-07, 09:48

http://i3.photobucket.com/albums/y82/zulu15/LMT_SBR1.jpg

Nothing too exotic, but I like it. The important parts (upper, lower, BCG) are all LMT, purchased from Grant. I just got it all together last week, so I haven't had a chance to shoot it yet. However, it should be making its first trip to Knob Creek next weekend. I'm very eager to see how she runs!

Derek

Jon G23

06-02-07, 22:01

I love this thing!

http://i178.photobucket.com/albums/w248/MNJon/GunStuff/SBR1.jpg

:D

twodollarbill

06-04-07, 11:27

Sweet Looking SBR's ...Guys

I like Derek's LMT......the tango grip is perfect!!!

Who makes that forward rail????

My LMT is setup with a Surefire M500, but my next one will get a M900

and I like the looks of that rail.

tiger seven

06-04-07, 12:39

I got that TD grip at the Knob Creek Machine Gun Shoot in April. It was in a "Misc. Used Stuff" box for $10. It was dirty as hell, but otherwise fine. I cleaned it up and sprayed it with some Krylon Non-Skid Coating (kind of like grip tape in a can) and it's awesome. I sprayed the KAC vertical grip too, and I really like the way they feel. One of my few complaints with AR accessories is that a lot of the plastic stuff is just too smooth. I like the grips to have a slightly more aggressive texture to them, but I don't want to wrap everything in tape. So far, I'm loving the Krylon stuff. Looks good too!

Derek

Robb Jensen

06-18-07, 05:15

My wifes now ARES-less 11.5" SBR.

http://img.photobucket.com/albums/v408/gotm4/gunpics/c4689108.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/c68064ae.jpg

SuicideHz

06-18-07, 18:11

The ARES unit went TU?

chrismartin

06-18-07, 18:42

9MM SBR...

http://web.mac.com/chrismartin/iWeb/Gun%20Stuff/AAC%203%20Lug%20EVO9_files/IMG_2671.jpg

http://web.mac.com/chrismartin/iWeb/Gun%20Stuff/AAC%203%20Lug%20EVO9_files/IMG_2674.jpg

Robb Jensen

06-18-07, 21:58

The ARES unit went TU?

I'm not 100% happy with the design so I traded/sold it for a Geissele trigger.

worm122

06-19-07, 07:11

my SBR

http://i204.photobucket.com/albums/bb157/worm122/ARSBR.jpg

parker7777

06-19-07, 14:23

lmt 10.5
http://i171.photobucket.com/albums/u311/parker7777_photo/DSC00841Small.jpg
:) :)

WILDBILL

06-20-07, 00:23

SWEET, I can't wait until my clone, MK18 MOD0 is complete.

USMC03

06-20-07, 07:23

LMT / LaRue / Bravo Company :

-Factory LMT Lower / Bolt Carrier / Charging Handle

-LaRue Tactical Stealth Upper Receiver

-LaRue 11.0 rail system

-Bravo Company (www.bravocompanyusa.com) 11.5" barrel (with cut down USGI A2 front sight base)

-Noveske KX3 flash hider

-Tango Down rail pannels

-Tango Down vertical foregrip

-Tango Down Battle Grip pistol grip

-Aimpoint ML2

-LaRue Aimpoint Mount

-LaRue Tactical Rear BUIS

-LMT Front BUIS

-KNS non-rotating hammer / trigger pin set

-Blue Force Gear VCAS Sling

-Magpul Enhanced Trigger Guard

-LMT SOPMOD stock

-Surefire M600 Scout light with clicker tail cap and incandesent bulb

-LaRue Tactical Scout light mount

-Orion Arms Engraving on the lower (info for SBR per BATFE....name, city, state)

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20LaRue%20SBR/DSC02100.jpg

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20LaRue%20SBR/DSC02101.jpg

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20LaRue%20SBR/DSC02102.jpg

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20LaRue%20SBR/DSC02103.jpg

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20LaRue%20SBR/DSC02104.jpg

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20LaRue%20SBR/DSC02105.jpg

USMC03

06-20-07, 08:50

From Pat Rogers' EAG Tactical Carbine Operator's Course:

http://demigodllc.com/~zak/DigiCam/EAG-Carbine-2007/small/D101_5240_img.jpg

http://demigodllc.com/~zak/DigiCam/EAG-Carbine-2007/small/D101_5230_img.jpg

http://demigodllc.com/~zak/DigiCam/EAG-Carbine-2007/small/D101_5255_img.jpg

http://demigodllc.com/~zak/DigiCam/EAG-Carbine-2007/small/D101_5247_img.jpg

-Jeff

Jon G23

06-20-07, 17:35

Thats some good stuff right there!! Yeah!!!

LMT / LaRue / Bravo Company :

-Factory LMT Lower / Bolt Carrier / Charging Handle

-LaRue Tactical Stealth Upper Receiver

-LaRue 11.0 rail system

-Bravo Company (www.bravocompanyusa.com) 11.5" barrel (with cut down USGI A2 front sight base)

-Noveske KX3 flash hider

-Tango Down rail pannels

-Tango Down vertical foregrip

-Tango Down Battle Grip pistol grip

-Aimpoint ML2

-LaRue Aimpoint Mount

-LaRue Tactical Rear BUIS

-LMT Front BUIS

-KNS non-rotating hammer / trigger pin set

-Blue Force Gear VCAS Sling

-Magpul Enhanced Trigger Guard

-LMT SOPMOD stock

-Surefire M600 Scout light with clicker tail cap and incandesent bulb

-LaRue Tactical Scout light mount

-Orion Arms Engraving on the lower (info for SBR per BATFE....name, city, state)

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20LaRue%20SBR/DSC02100.jpg

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20LaRue%20SBR/DSC02101.jpg

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20LaRue%20SBR/DSC02102.jpg

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20LaRue%20SBR/DSC02103.jpg

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20LaRue%20SBR/DSC02104.jpg

http://i153.photobucket.com/albums/s206/molsen2295/USMC03/LMT%20LaRue%20SBR/DSC02105.jpg

ashooter

06-22-07, 11:16

Put together by G&R with a little help from ADCO... soon to be updated with an OPS 15th Model (I hope).

http://i17.photobucket.com/albums/b99/ashooter/LLSBR2.jpg

I guess I could give some specs:

- Noveske 12.5" medium contour barrel with VLTOR low profile gas block
- Ops Inc. A2 flash-suppressor and collar for 15th/16th Model (that's where ADCO came in)
- LaRue 9.0 forend with my home-chopped TangoDown VFG
- Troy sights
- SBR'd LMT lower half
- Aimpoint ML3 soon to be replaced with an Accupoint TR21-R... or maybe some flavor of ACOG

Aubrey

06-22-07, 12:05

VERY NICE ashooter! Thanks for sharing.

Nimslow

06-24-07, 13:35

My LWRC SRT upper, on a POF lower.

http://i21.photobucket.com/albums/b299/nimslow/IMG_1058.jpg

ic_guerrero

06-24-07, 14:56

I don't think I've posted these pics on this thread.

http://i17.photobucket.com/albums/b51/ic_guerrero/Mk18Mod0.jpg

http://i17.photobucket.com/albums/b51/ic_guerrero/IMG_4218.jpg

I'm still waiting for the light and the KAC NT-4 QDSS

SuicideHz

06-24-07, 15:45

Nice choice in suppressors!

Jon G23

06-24-07, 17:10

A fun Krink photo.....

http://i178.photobucket.com/albums/w248/MNJon/GunStuff/krink1w.jpg

And another of my SBR.....

http://i178.photobucket.com/albums/w248/MNJon/GunStuff/shorty1w.jpg

Code3Patriot

06-30-07, 12:54

How is it doing? I like the new all black look! She needed a new paint job anyway.

Running like a champ, used it at a three day SWAT update course with no issues. So far it hasn't been needed on any call outs or warrant service (using HK subguns for building searches) but I'm sure it's only a matter of time.

gunny

06-30-07, 19:24

http://i199.photobucket.com/albums/aa270/force8654/DSC01718.jpg

Stephen_H

07-10-07, 14:42

Got a new camera this past weekend and took some updated pictures of my babies...

LWRC 5.56mm M6A2 CQB with Gemtech G5 Suppressor

http://img.photobucket.com/albums/v342/stephen_101st/Gear/LWRCCQB-GemtechG5-3.jpg

LWRC 5.56mm M6A2 CQB with AAC M4-2000 Suppressor

http://img.photobucket.com/albums/v342/stephen_101st/Gear/6-1.jpg

GLOCKMASTER

07-30-07, 16:04

A little (a lot) of advice and help from Wes Grant at MSTN made my first SBR possible.
LMT 10.5 upper
LaRue 10" rail system
LMT BUIS
Noveske KX3
EoTech on a LaRue Mount
LMT Lower
Tango Down VFG
Surefire Light in a Viking Tactics Mount
PRiI CH

http://www.jesseshunting.com/photopost/data/500/medium/DSCF0775.JPG
http://www.jesseshunting.com/photopost/data/500/medium/DSCF0776.JPG
http://www.jesseshunting.com/photopost/data/500/medium/DSCF0778.JPG

Tuukka

08-03-07, 08:45

Do these count ?

http://www.aseutra.fi/english/product/Kopio IMG_4579.JPG

ashooter

08-03-07, 10:12

Do these count ?

http://www.aseutra.fi/english/product/Kopio IMG_4579.JPG

What kind of can is on that G36?

Tuukka

08-03-07, 10:34

ashooter,

That is one of our jet-Z CQB suppressors.

RHR

08-11-07, 21:04

Some updated pics...

http://img20.imageshack.us/img20/848/dsc018500012dz6.jpg

http://img20.imageshack.us/img20/18/dsc01880004zm4.jpg

edwin907

08-15-07, 11:12

http://i192.photobucket.com/albums/z238/edwin907/MRPa.jpg

10.5" LMT MRP with SpecWar2

gunny

08-16-07, 17:20

http://i199.photobucket.com/albums/aa270/force8654/DSC01253.jpg

edwin907

08-23-07, 20:45

Krink with NDS rail and ML2 Aimpoint.

http://i192.photobucket.com/albums/z238/edwin907/ML2.jpg

Craftsman62

09-22-07, 11:10

http://i51.photobucket.com/albums/f360/reddyrob/GUNS/M4Noveske.jpg

Robb Jensen

09-23-07, 12:29

Here's how my LMT 10.3" is currently set up. I removed the heavy SureFire 951 and the forward grip. I need to find a lightweight light probably will run a X200 or X300 eventually.

http://img.photobucket.com/albums/v408/gotm4/gunpics/today001.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/today002.jpg

ic_guerrero

09-24-07, 18:48

I finally received my suppressor today and wanted to show the updated pics of my SBR. I have yet to fire the suppressor, but when I do I'll let you all know how it sounds.

LMT 10.5" Upper
LMT Defender Lower
LMT SOPMOD Stock
KAC RAS w/ SAS lower
Surefire M951C
KAC NT-4 QDSS
Aimpoint M3

http://i17.photobucket.com/albums/b51/ic_guerrero/IMG_4622.jpg

http://i17.photobucket.com/albums/b51/ic_guerrero/IMG_4623.jpg

http://i17.photobucket.com/albums/b51/ic_guerrero/IMG_4624.jpg

Craftsman62

09-27-07, 03:36

One of my old "Work" guns overseas.
It shot well and had no malfunctions with soviet ammo.

http://i51.photobucket.com/albums/f360/reddyrob/GUNS/DSC02018.jpg

ZGXtreme

10-01-07, 09:13

Got my 6933 a little over a month ago. Will be finished equipping it once I receive my X300/XT07 setup from Surefire.
http://i235.photobucket.com/albums/ee266/zgxtreme_photos/Commando001.jpg

Deskjockey

10-04-07, 00:14

http://img2.putfile.com/thumb/10/27521080574.jpg (http://www.putfile.com/pic.php?img=6782865)

STAG Lower sbr'd as an individual. Took a little over 4 weeks to get back Form 1. It has been sitting in the safe for four months until I had the cash to put it together.

Grant built the upper. Barrel came to him with the KAC, which is great because next on the list is KAC QD Suppressor.

Robb Jensen

10-04-07, 04:56

f.2

10-04-07, 06:02

S.A.W. 6921SP

http://img505.imageshack.us/img505/3783/6921spuj5.th.jpg (http://img505.imageshack.us/my.php?image=6921spuj5.jpg)

D-gin

10-04-07, 11:45

http://i51.photobucket.com/albums/f360/reddyrob/GUNS/M4Noveske.jpg

Just gorgeous! :cool:

Paulinski

10-04-07, 12:45

S.A.W. 6921SP

http://img505.imageshack.us/img505/3783/6921spuj5.th.jpg (http://img505.imageshack.us/my.php?image=6921spuj5.jpg)

Very nice Colt. Congrats.

Paul

Deskjockey

10-04-07, 19:21

;)
Deskjockey that looks familiar to me ! ;)

I thought that it would. Good to see you at NRA. I will see you around. ;)

SuicideHz

10-04-07, 19:50

Craftsman62

10-05-07, 09:45

Just gorgeous! :cool:

Thanks. It's a SHOOTER too. I took it to Mid-South in July and put over 6k through it in 5 days without cleaning it. It didn't so much as hiccup!
It'll shoot sub-moa with Black hills 77gr match and a real optic.
:D

Abdon

10-05-07, 10:32

[QUOTE=ic_guerrero;79890]I finally received my suppressor today and wanted to show the updated pics of my SBR. I have yet to fire the suppressor, but when I do I'll let you all know how it sounds.

LMT 10.5" Upper
LMT Defender Lower
LMT SOPMOD Stock
KAC RAS w/ SAS lower
Surefire M951C
KAC NT-4 QDSS
Aimpoint M3

http://i17.photobucket.com/albums/b51/ic_guerrero/IMG_4622.jpg

http://i17.photobucket.com/albums/b51/ic_guerrero/IMG_4623.jpg

http://i17.photobucket.com/albums/b51/ic_guerrero/IMG_4624.jpg

Very nice! What's the availability on those suppressors?

OUTSTANDING!!!

That is EXACTLY how I want my SBR to look, except I'm probably going to go with the Gemtech G5 suppressor. Planning on getting the LMT defender lower with 2-stage match trigger and SOPMOD stock next week.

Very nice blaster sir!!!

Abdon

Looey

10-05-07, 10:43

[QUOTE=SuicideHz;82779]

OUTSTANDING!!!

That is EXACTLY how I want my SBR to look, except I'm probably going to go with the Gemtech G5 suppressor. Planning on getting the LMT defender lower with 2-stage match trigger and SOPMOD stock next week.

Very nice blaster sir!!!

Abdon

AWESOME!!!!!! :eek:

D-gin

10-05-07, 14:07

Thanks. It's a SHOOTER too. I took it to Mid-South in July and put over 6k through it in 5 days without cleaning it. It didn't so much as hiccup!
It'll shoot sub-moa with Black hills 77gr match and a real optic.
:D
Sounds nice, It's always better to have a range king rather then a safe queen.

If I had the time to build an SBR it would have a setup similar to yours (simple and clean) but at the moment I'm saving funds for my SPR build.

variablebinary

10-05-07, 15:33

http://home.comcast.net/~grevioux/SBR1.JPG

http://home.comcast.net/~armandoc14/Travelgun.JPG

S-1

10-05-07, 19:04

Very nice! What's the availability on those suppressors?

Trey Knight says that they are available and ready to ship to dealers.

I love mine.:)

http://img444.imageshack.us/img444/1305/lmtm4qdnt4kw3.jpg

TPDSOT

10-12-07, 23:29

SuicideHz

10-13-07, 13:37

Bolt_Overide

10-13-07, 15:38

hes got a trigger pack, which for aug type rifles is removable fairly easily, that is Full Auto, I would assume one of the rare ones that got registered before the 86 ban, maybe a postie, who knows..

TPDSOT

10-14-07, 02:27

hes got a trigger pack, which for aug type rifles is removable fairly easily, that is Full Auto, I would assume one of the rare ones that got registered before the 86 ban, maybe a postie, who knows..

Post sample, for testing, sorry I was not more clear.

Craftsman62

10-14-07, 05:27

Here is my AXR standing up against a 16" AR, oh wait it is a 16.25" barrel in my AXR it just looks like a 11.5" barrel.

Couldn't resist...

http://i2.photobucket.com/albums/y49/kentlik/AXR081a.jpg

It does have a F/A pack so it does rate NFA thread

It looks nice but no offense to YOU, I wouldn't wipe my ass with anything from Steyr just out of principle..........
Steyr Article (http://righttruth.typepad.com/right_truth/2007/02/rifles.html)
Another Article (http://www.telegraph.co.uk/news/main.jhtml?xml=/news/2007/02/13/wiran313.xml)

Bolt_Overide

10-14-07, 08:37

then i suppose it would be instructive to point out that his rifle isnt made by steyer...

Daveo

10-14-07, 10:31

http://i144.photobucket.com/albums/r195/hooligan_22/SBR/DSCF1761.jpg

LMT 10.5" upper
LMT FA BCG
LMT BUIS
Eotech 551
Magpul CTR
Magpul MIAD
BFG Vickers sling

Craftsman62

10-15-07, 03:40

then i suppose it would be instructive to point out that his rifle isnt made by steyer...

:D
Thanks for pointing out my error. I didn't realize it was an americanized version of the AUG. It's a very nice piece of work. I Might have to look into adding one to arsenal given the improvements made. Hopefully TPD doesn't pay any license or royalties to Steyr, that would be a deal breaker for me.
I STILL stand on my opinion of Steyr...

SuicideHz

10-15-07, 19:09

You have an arsenal? Damn...

orbusrex

10-21-07, 22:39

Here's my little shooter...

http://i236.photobucket.com/albums/ff308/orbusrex/Guns001.jpg

http://i236.photobucket.com/albums/ff308/orbusrex/Guns002.jpg

http://i236.photobucket.com/albums/ff308/orbusrex/Guns004.jpg

Stag lower
Noveske 7.5/ VLTOR VIS upper (Hope you like the T-shirts John!)
ACOG TA-47
Streamlight TLR-2
Tango Down grip/ VFG
Magpul CTR stock
RRA selector switch

This is my first build... it was going to be the cheapest 10.5 build I could make but that didn't last long. I figured since I have a Colt 16 inch, this one should be as small as possible. Then I thought, the VIS is the coolest looking upper out there, and Noveske just partnered up, so what the hell... then the accessories started catching my eye...

The rest is history. I love this gun. Got to snap it on a full auto lower and it fired like a dream. Definatley the favorite piece in the safe for sure.