View Full Version : Troys new upper receivers
sniperfrog
02-12-10, 12:09
I saw on Troys website that they have a new upper with a 16" hammer forged and NiCorr lined barrel. Anybody see one of these or know anything about them?
I saw on Troys website that they have a new upper with a 16" hammer forged and NiCorr lined barrel. Anybody see one of these or know anything about them?
Don't know much. Will see if I can get some details.
C4
crowkiller
02-12-10, 16:57
http://store.troyind.com/Troy_M7_16_CQB_Receiver_p/supr-m70-06bt.htm
eternal24k
02-12-10, 21:34
Interesting.
Wonder who is making their barrels
Syracuse Heat Treating *NiCoRR (http://www.syracuseheattreating.com/services/pop-nicorr.htm)
NiCorr is low temperature nitro carburizing treatment (FNC) followed by an oxidation/impregnation phase. NiCorr imparts excellent wear resistance, increased yield and fatigue strength, lubricity, and corrosion resistance.
We offer a variety of NiCorr treatments depending on the finish and corrosion resistance required. NiCorr-C leaves a hard, low microfinish, black corrosion resistant surface capable of resisting 360+ hours of accelerated salt spray as tested per ASTM B117. It competes favorably with Chrome and Electroless Nickel Plating.
Economic Considerations:
* Minimal distortion: done in the finish machined and ground condition applicable on all ferrous materials - increased wear, fatigue, yield properties may allow low carbon materials to be substituted for more expensive materials without loss of performance.
* Plating is eliminated: saving cost of plating, transportation time. NiCorr is environmentally benign.
sniperfrog
02-15-10, 09:55
I'm surprised Troy hasn't put out more info on these. There was alot of stuff I heard about Troy from SHOT but no one mentioned these uppers.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.