PDA

View Full Version : ATI AR15 multi tool


Bowser
02-22-10, 00:00
Anyone have any experience with the ATI AR15 multi tool?

I hope it isn't of airsoft quality like their rifles are.

http://www.aimsurplus.com/product.aspx?item=XARTool&groupid=52
dcs12345
02-22-10, 12:46
I bought one, but it hasn't shipped yet. If I remember, I will let you know what I think once I get it.
Marty916
02-22-10, 13:27
I took a quick glance and they don't specify what grade steel they use. As long as the appropriate specs are maintained so you don't round off any corners and the tool material isn't too soft it should be good to go.
C4IGrant
02-22-10, 14:04
Anyone have any experience with the ATI AR15 multi tool?

I hope it isn't of airsoft quality like their rifles are.

http://www.aimsurplus.com/product.aspx?item=XARTool&groupid=52


It can't be as bad as the DPMS version.



C4
dcs12345
02-22-10, 19:46
It can't be as bad as the DPMS version.



C4

True

It at least looks like it has 3 lugs, not 2 on the barrel nut wrench.
Outlander Systems
02-22-10, 22:17
So, what would you guys consider the best one available right now?

http://www.bravocompanyusa.com/Armorer-AR15-Barrel-Wrench-p/tool%20armorer%20ar15%20wrench.htm
dcs12345
02-24-10, 13:25
I wouldn't mind using a PRI Wrench if was only installing a barrel nut.

http://www.brownells.com/.aspx/sid=52636/sku/AR_15_Barrel_Nut_Wrench
http://www.brownells.com/userdocs/skus/p_714000007_1.jpg
dcs12345
03-07-10, 22:15
Well I finally got the time to use my ATI tool. I didn't have any problem with it while I was building this:

http://i239.photobucket.com/albums/ff283/dcs12345/Bravo%20Barrel%20RRA/IMG_0257.jpg